• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.11a
• /
• pp.236-237
• /
• 2021

In the waterproofing of the rooftop of reinforced concrete buildings, it is difficult to solve perfectly according to the proficiency of waterproofing materials, methods, and mechanics. Therefore, this study applies a Tricot Fabric Mesh to the behavior of the bottom concrete. In addition, it responds to the behavior of the concrete cracking, and the waterproofing and protective layer has developed a method to provide convenience for rooftop floor use by adhesion between the base and the waterproof layer with the use of high viscosity urethane to effectively move the surface deformation and surface vapor and install a airvent device on the wall.

• Journal of the Korean Geographical Society
• /
• v.30 no.3
• /
• pp.255-268
• /
• 1995

According to cultural diffusion route, the Korean toilet culture could be classified as southern culture and northern culture, In Cheju Island the toilet is located on the stone fence of swine. The native people of Cheju Island name it as TONGSHI. And Southern culture could be diffused from South Sea to Cheju Island by the sea current. Around Mt.Chiri area, the greater part of traditional toilets are on the upper floor in the barn, and pigs are on the bottom floor under the toilet. This type of toilet would be the northern culture of the toilet, which would be diffused from continent of Asia to Korean Peninsula. Residents of these areas also name this toilet as TONGSHI. The Korean word "TONGSHI" means a toilet on the pig fence. Traditional toilet culture in Korea differs from regions and residents. We can find dry-closets in Seon-am Temple and Song-kawng Temple. This high floor dry-closet type would be effected by Buddhism. In the reclaimed land and islands of west sea we could not find the old traditional toilets.l toilets.

• Journal of Wetlands Research
• /
• v.22 no.2
• /
• pp.73-80
• /
• 2020

Polygonatum stenophyllum Maxim. is a native perennial herb to Korea belonging to family Liliaceae. Although it was removed from the endangered species list, since it inhabits the riverside, it has been threatened with damage to its populations due to frequent disturbances. In order to reveal the basic ecological characteristics of P. stenophyllum, This study was identified the life cycle of the aboveground part and was measured the number of flowers and fruits, which are reproductive organs of P. stenophyllum in riverside in Paju - si during the two years. As a result, aboveground part of P. stenophyllum appeared and grew rapidly until the end of May to about 1m. In early May, two buds per one peduncle were formed up to six pairs per floor. The flowers bloomed in turn from the base of the stem and to the top floor and the blooming occurred when the number of leaves was at least three. Fruits were formed in mid-June and matured by the end of September. The numbers of flowers and fruits were revealed that flowers bloomed in turn from the bottom of the stem to the top floor, the most intensively bloomed in the center part of the stem, and did not bloom from the floor closest to the ground and above the highest 5th node. This basic ecological characteristics of the P. stenophllyum grown in riverside identified in this study will be useful as basic data for their conservation.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.60 no.3
• /
• pp.71-81
• /
• 2018

$CO_2$ concentration has a significant effect on quality of cold-stored apples. High indoor $CO_2$ concentrations above 10,000 ppm cause the browning of apples and result in economic loss for farmers. The purpose of this study is to evaluate $CO_2$ concentrations and their distribution in a controlled atmosphere (CA) storage and provide better structural designs to improve the $CO_2$ environment using computational fluid dynamics (CFD) simulations. The CFD model was developed for a real CA storage for apples and applied to investigate the effect of changing the inlet and outlet locations and the aspect ratio of the floor of the CA storage on the spatial distributions of $CO_2$ concentration and the browning of the apples. The lowest $CO_2$ concentrations in existing CA storage with a high aspect ratio of the floor were achieved from the combination of the inlet located at the top of the right side and the outlet located at the bottom of the left side. In modified CA storage with a low aspect ratio, the combination of the inlet and outlet located at top and bottom of left side respectively achieved the lowest $CO_2$ concentrations. The proposed case enhanced the storage performance by reducing total browned apples by 3.6% in storage duration of 210 days. This study is expected to reduce the browning damages of apples in CA storage, and thus greatly prevent economic losses.

• Fire Science and Engineering
• /
• v.20 no.2 s.62
• /
• pp.44-53
• /
• 2006

We have conducted a numerical simulation under two-dimensional unsteady conditions in order to analyze the effect according to the injection angle and velocity of the $CO_2$ agent nozzle which is one of the elements for the fixed type $CO_2$ fire extinguishing system installed in a ship on the characteristics of flow and $CO_2$ concentration distribution. The flow fields and concentration fields were measured and analyzed. We can found that the difference of flow patterns according to the conditions of $CO_2$ agent injection nozzle, and in all the conditions of $CO_2$ agent injection nozzle, the iso-concentration line was expanded from the region at which vortex was generated to the surroundings. We can expected that the intensity of the wall jet on the bottom floor was generated differently and the iso-concentration lines were expanded or shrunk according to the angle of $CO_2$ agent injection nozzle. In case of increasing $CO_2$ agent injection velocity maintaining the flow quantity of the $CO_2$ agent injection equally, the iso-concentration line of $CO_2$ agent on bottom floor can be formed more higher than in case of decreasing $CO_2$ agent injection velocity.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2002.11a
• /
• pp.147-153
• /
• 2002

Due to the growth of population and industrial development at the coastal cities, there has been much increase in necessity to effective control of the wastes into the coastal water and river. The amount of disposal at those waters has been increased rapidly and it is necessary for us to track of it in order to keep the water clean. The investigation and research related to the water quality in this region have been conducted continuously but the systematic survey of the disposed wastes at the bottom was neglected and/or minor. In this study we surveyed the status of disposed waste distribution at the bottom coastal water and river from the scanned images. The intensity of sound received by the side scan sonar tow vehicle from the sea floor provides information as to the general distribution and characteristics of the superficial wastes. The port and starboard side scanned images produced from a transducer borne on a tow fish connected by tow cable to a tug boat have the area with width of 22m∼112m, and band of 44m∼224m. All data are displayed in real-time on a high-resolution color display (1280 ${\times}$ 1024 pixels) together with position information by DGPS. From the field measurement and analysis of the recorded images, we could draw the location and distribution of bottom disposals. Furthermore, we made a database system which might be fundamental for planning the waste reception and process control system.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.4 no.2
• /
• pp.101-106
• /
• 1999

The down-core distribution of chlorophyll a, organic carbon contents and ${\delta}^{13}C$ in the bottom sediments were measured to understand the evolution of eutrophication in Masan Bay. Bottom sediment were collected in January 1994. The chlorophyll a and organic carbon contents in the sediment core decreased with increasing sediment depth, respectively. Bottom sediments (0~20 cm) in Masan Bay was rich in chlorophyll a (avg. 9.6 ${\mu}g\;g^{-1}$ dryweight) and organic C (avg. 2.5%). The down-core distribution of chlorophyll a suggests that the inner part of Masan Bay has experienced the acceleration of chlorophyll a supply since 1960s. Flux of organic carbon to the sea floor is in the range of 10 $gCm^{-2}\;yr^{-1}$ assuming the C:Chl a ratio of 25. It suggests tht approximately 1.3% of the fixed carbon by phytoplankton appears to be deposited in the bottom sediments.

• Korean Journal of Ichthyology
• /
• v.34 no.2
• /
• pp.127-132
• /
• 2022

Most of the downstream of the river is blocked by beams, so fishways are required for the movement of conciliatory fish species and connection with the upstream. Therefore, it is very important as an ecological pier that can help free movement of fish. The three previously installed eel ladders use only brushes on the bottom. For find out the effect of the bottom material except to brush, experimented used model glass eel ladders to the ascent of glass eel. The eel ladder model was 1.2 m length, 0.3 m wide, and 0.1 m high, and three gravels of different particles were attached to the bottom of the fish ladder setting on the Geumgang Estuary Bank. The first model ladder was made of gravel with particles of 5 mm, and the second model ladder was made of gravel with particles of 2 mm. The third model ladder was made by solidifying with particles of 1 mm or less cement. All experiments were repeated 5 times for 1 hour. As a result of the experiment, the lower the angle, and the smaller the gravel particles, the more glass eels are ascended to the ladder, but the made of cement was nearly not ascent. The gravel-bottom model ladder has a lower discharge and flow rate than the brush ladder so more glass eels can ascent ladder, and if the glass eel ladder is improved through experiments applying various floor materials and variables in the future, more glass eels are going to ascent glass eel ladder.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.5
• /
• pp.101-107
• /
• 2017

Over-break, which is excavated larger than planned line at tunnel excavation, is inevitable due to the nature of blasting. But regarding the bottom of the foundation, most of the domestic ordering organizations pay only 10 cm thick filled concrete when pouring concrete due to over-break. In accordance, the construction cost will increase greatly if all the depths of the designed over-break are filled only with concrete. When tunnel excavation occurs, concrete filling of 18 MPa(T = 100 mm) and 150 mm~237 mm auxiliary concrete layer and 240 mm concrete track(TCL) are applied to the upper part. The concrete is installed in an excessive amount of about 600 mm between the lower part of the rail and the tunnel rock bed. Therefore, in this study, it is necessary to analyze the concrete crack structure according to the depth of the existing tunnel and the modified tunnel section, and to evaluate the adequacy of the required thickness of the tunnel floor concrete for securing the crack stability of the concrete.

• Journal of the Korea Convergence Society
• /
• v.11 no.8
• /
• pp.153-158
• /
• 2020

In this study, the thermal and stress analyses were performed by applying a temperature condition of 100℃ at CPU cooler model. The value of heat flux value is shown to be the most at the lower rod area. The upper part becomes, the smaller the heat flow rate. The highest temperature is shown at the bottom of the CPU cooler model. Overall, the upper part becomes, the smaller the temperature becomes. Based on the temperature analysis, the thermal deformation caused by expansion, the deformation becomes smaller as the upper part of the overlapping plates. The great deformation happens at the bent area of the small rod as the lower part of model and the least deformation is shown at the lowest floor of model. In addition, the maximum thermal stress of 570.63 MPa happens at the floor below model. The stress is shown to decrease as the upper part of the overlapping plates becomes. But the stress is shown to increase somewhat at the middle part of model. By applying the study result on the thermal and stress analyses of CPU cooler, this study is seen to be suitable for the aesthetic convergence.