• The Research Journal of the Costume Culture
• /
• v.31 no.3
• /
• pp.379-393
• /
• 2023

In this study, a survey focusing on the status of clothing interest, inconveniences resulting from clothing, preferred design items, etc. was conducted on 364 elderly women to suggest aesthetically and functionally appropriate indoor wear design for at home elderly women aged 60 years or older. The survey results showed that in general, the respondents' interest in clothing was high, and more respondents in their 70s or older had difficulty in the action of opening and closing. With respect to considerations when purchasing clothes, color was considered more important than design as respondent's age increased, and size was regarded as the most important factor especially among those in their 80s. The preferred top styles were T-shirts and blouses among those in their 60s and 70s, and T-shirts and shirts among those in their 80s. The preferred sleeve lengths were "below the elbow" and "above the wrist" in all age groups. The preferred sleeve hem type was "tightening" in all age groups. The most preferred bottom styles were "straight-leg pants" and "elastic waistband." This study suggests the design items of indoor wear, including top, bottom, and overgarment for warmth, appropriate for elderly women at home based on the survey results. The study results are expected to serve as basic data necessary for the revitalization of the clothing industry for elderly women.

• Journal of Environmental Health Sciences
• /
• v.40 no.2
• /
• pp.127-136
• /
• 2014

Objectives: This study was conducted to investigate the removal of high odor concentration from swine wastewater treatment facility by full scale biofilter using liquid with deodorant mixed with earthworm cast and distillery sludge. Methods: The supply of the culture liquid to the microorganism on the media in the biofilter increases the activity and growth of biomass. The experimental equipment was biofilter tower with treatment capacity of 90 m 3/min. The experimental conditions included gas flow of $60m^3/min$, retention time of 20 sec, and gas/liquid ratio of 67. Results: With changing season from winter to summer, the inlet odor concentration of ammonia increased from 2.5 ppm to 29 ppm, and of hydrogen sulfide from 21 ppm to 91 ppm, respectively. The odor treatment system with biofilter using the culture liquid was stable when the high loading rate increased and showed excellent removal grade with an average of 96.7% for ammonia, and an average of 93.7% for hydrogen sulfide. The pH and SCOD in the recirculating culture liquid near the bottom of the biofilter tower decreased with operation time, but its influence on the odor removal rate was negligible, because the organic matter (SCOD) was replaced by some culture liquid supplied 2-4 times per day. Conclusions: The biofilter using culture liquid could successfully remove high odor concentration which was generated from swine wastewater treatment facility.

• Journal of Aquaculture
• /
• v.15 no.3
• /
• pp.145-155
• /
• 2002

Effect of density (30, 40, 65, 90 or 120/cage) of lantern and bottom cages on growth of the ark shell, Scapharca satowi was studied in the Korean west coast from April 2000 to October 2001, when the following range of environmental conditions prevailed : temperature : 4.2 -25.5 $^{\circ}C, salinity : 30.23-32.$15\textperthousand, dissolved oxygen : 5.12-7.16 $ml$/l, pH : 7.84-8.17, phosphate : 0.22-0.56 $\mu $M, dissolved inorganic nitrogen : 3.16-9.10 $\mu $M, suspended solid : 7.6-17.9 mg/l, chemical oxygen demand: 0.46-1.61 mg/l and chlorophyll-a : 0.92-5.93 $\mug/l. Daily growth rate of shell length ranged from 0.066 to 0.071 mm/day for the lantern net cages, and from 0.079 to 0.082 mm/day for the bottom cages. Total weight also ranged from 0.067 to 0.082 g/day in the lantern net cages, as against 0.099 to 0.114 g/day in the bottom cages. Hemoglobin content of S. satowi (55 mm shell length), which was about 3.9 g/dl during february, 2001, increased to 6.0 and 7.0 g/dl during October, 2001 in animals culture in the lantern and bottom cages, respectively. ANOVA test of the growth rate showed that the growth rate of S. satowi, was significantly dependent on rearing density and the tested culture methods (P < 0.0001). The daily growth rate of the shell length was more significantly correlated with water temperature; the growth rate of shell length and total weight showed a tendency decrease with decreasing temperature. In cages suspended at the bottom, not only the increase shell weight but also the meat obtainable from comparable sized S. satowi was greater. Survival decreased with increasing density and was optimal at the density of 30 individual/cage.

• KSBB Journal
• /
• v.7 no.4
• /
• pp.252-257
• /
• 1992

A flat-type membrane bioreactor(FMBR ) for aerobic whole cell immobilization was developed and its performance for the citric acid production was investigated using Aspergillus niger (KCTC 1232). The reactor consisted of three layers. The top layer contained flowing air for oxygen supply, the middle layer had stationary cells, and the bottom layer had flowing aqueous nutrients. The initial pH of the culture medium played an important role in citric acid production and the lower initial pH of the culture medium resulted in a higher citric acid yield. Under air and pure oxygen aerations the volumetric productivity reached 0.20 and 0.40g/Lh. Furthermore, the productivity improved with the increase of the culture medium feed rate.

• Design & Manufacturing
• /
• v.15 no.2
• /
• pp.11-16
• /
• 2021

Recently, three-dimensional (3D) cell culture systems, which are superior to conventional two-dimensional (2D) vascular systems that mimic the in vivo environment, are being actively studied to reproduce drug responses and cell differentiation in organisms. Conventional two-dimensional cell culture methods (scaffold-based and non-scaffold-based) have a limited cell growth rate because the culture cannot supply the culture medium as consistently as microvessels. To solve this problem, we would like to propose a 3D culture system with an environment similar to living cells by continuously supplying the culture medium to the bottom of the 3D cell support. The 3D culture system is a structure in which microvascular structures are combined under a scaffold (agar, collagen, etc.) where cells can settle and grow. First, we have manufactured molds for the formation of four types of microvessel-mimicking chips: width / height ①100 ㎛ / 100 ㎛, ②100 ㎛ / 50 ㎛, ③ 150 ㎛ / 100 ㎛, and ④ 200 ㎛ / 100 ㎛. By injection molding, four types of microfluidic chips were made with GPPS (general purpose polystyrene), and a 100㎛-thick PDMS (polydimethylsiloxane) film was attached to the top of each microfluidic chip. As a result of observing the flow of the culture medium in the microchannel, it was confirmed that when the aspect ratio (height/width) of the microchannel is 1.5 or more, the fluid flows from the inlet to the outlet without a backflow phenomenon. In addition, the culture efficiency experiments of colorectal cancer cells (SW490) were performed in a 3D culture system in which PDMS films with different pore diameters (1/25/45 ㎛) were combined on a microfluidic chip. As a result, it was found that the cell growth rate increased up to 1.3 times and the cell death rate decreased by 71% as a result of the 3D culture system having a hole membrane with a diameter of 10 ㎛ or more compared to the conventional commercial. Based on the results of this study, it is possible to expand and build various 3D cell culture systems that can maximize cell culture efficiency by cell type by adjusting the shape of the microchannel, the size of the film hole, and the flow rate of the inlet.

• Korean Journal of Microbiology
• /
• v.11 no.3
• /
• pp.134-151
• /
• 1973

The physico-chemical and biological factors of coastal sea water were measured bimonthly from 1976 to 1979 for elucidating the relationship between microbial distribution and environmental factors at Masan and Jinhae bay. The experimental results are summarized as followings : 1) The polulation size of bactriz in sea water were increasing as the water temperature increased, and that was higher at station 2 and 3 than at station 1. The number of fungi showed the highest value on July on bottom. The population size of yeast showed no seasonal variation and also showed a relation with the geographic distance. 2) The correlationship between microbial distribution and environmental factors showed little coefficiency in surface water. And the other hand, at bottom water, between general bacteria and water temperature and dissolved oxygen, and between yeast and salinity, there were relatively high coefficiecy.

• International Journal of Contents
• /
• v.15 no.2
• /
• pp.53-58
• /
• 2019

The aim of this paper is to discuss how designers lead and direct 'technology-driven society' using their creative communication skill. To this end, it is required for communication designers to take conscious steps to recognize the future direction of their profession. Despite the advancement in technology, there is a human being at the center of all design activities. From a certain point of view, contemporary communication design takes an open-ended exploration of the subject matter, rather than a finished output. The notion of creative leadership may potentially expand more in terms of improving the methodology of today's visual culture. The paper will examine creative leadership that could be proposed by the challenge of discourse upon the upcoming industrial revolution. Today, communication designers are confronted by new leadership opportunities and challenges. Some leading designers seem to focus on brand new media technologies to prepare the 4th industrial revolutions. However, communication design cannot be discussed in the medium but can be understood as a process. Top-down and bottom-up process is always a concerned about the relationship since the focus of leadership has changed. In the top-down process, the leadership has existed between 'designer and client' because designers have played their role as a problem solver. On the other hand, there is a different model of leadership between 'design and technology' based on bottom-up process, which stem from the design authorship. In this regard, the new definition of creative leadership in the $4^{th}$ industrial revolution proposes a designer as a problem-finder based on the relationship between the 'designer and the public'.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.10 no.4
• /
• pp.259-265
• /
• 1977

After a great mortality owing to abnormal oceanographical condition and fungal disease in 1973 hanging cultch lines per raft has been reduced to 450 from 558, and oyster production per raft has also been decreased. It seems to be result of dense culture of oysters and its resulting accumulation of waste materials on the sea bottom in the farm area. The present study was carried out to investigate the effect of rearing density and the degree of eutrophication in Geoje Bay for 6 months from June through November in 1977. Total area of this bay is about $48.9\;km^2$, and the area of registered oyster farms as of November in 1977 is around $10.9\;km^2$, which is about $22.3\%$ of this bay. Water Quality during summer season was shown as transparency 5.5 m, COD 1.5ppm, degree of oxygen saturation $90.6\%$ in upper and middle layers and $82.2\%$ near bottom, chlorophyll-a 3.0 mg/m^3, and phytoplankton $8.7\times10^4\;cells/l$. In superficial mud in August COD was 35.4 mg/g, total sulphide 0.24 mg/g, and phaeophytin $43.7\;{\mu}g/g$dry mud. These values indicate that water qualify in this bay is so far excellent but quantities of chemical oxygen demend and sulphide in bottom mud show maximum level or a little over eutrophication standard.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.7 no.2
• /
• pp.41-51
• /
• 1974

A study of the sanitary quality of Pacific oysters (Crassostrea gigas) and growing waters associated with raft culture in Burley Lagoon, Washington was conducted. The study was sponsored by the Agency for International Development of the U.S. Department of State. The results obtained in this study are as follows: The average values of temperature, salinity and turbidity in the water showed that the values of bottom sample were slightly higher than top samples. The difference was about $0.3^{\circ}C$ for temperature, $0.5\%_{\circ}$ for salinity and 0.1 JTU for turbidity. The changes of temperature and salinity by tide generally followed the tide cycle pattern. Sanitary indicator microorganism concentrations in top water were generally higher than those in bottom water. In general, the levels of mean coliform and fecal coliform MPN's varied inversely with tide level indicating that the sources of these groups of microorganisms are the fresh water streams flowing into the estuary. The $35^{\circ}C$ plate counts were more stable at different tide levels. Mean values of coliform and fecal coliform MPN's in oysters demonstrated that levels in top oysters were generally higher than those in bottom oysters. However, mean values of $35^{\circ}C$ Plate count in oysters did not show this pattern. The mean levels of both coliform and fecal coliform MPN's in oysters also correlated inversely with tidal level. The accumulation ratios of oysters obtained during the study period ranged from 8.6 to 19.7 for mean coliform MPN and 16.9 to 44.3 for fecal coliform MPN. According to the results obtained from present study, one suggestion could be of considerable importance for the sanitary operation in hanging culture of pacific oysters. The results indicate that harvest of the oysters at high tide would result in lower levels of indicator organisms in the shellfish.

• Korean Journal of Veterinary Service
• /
• v.44 no.3
• /
• pp.149-155
• /
• 2021

In virucidal efficacy testing, the chemical inactivation cannot be determined for all viruses due to the difficulties or the inability to culture sufficiently or the risk of exposure to the viruses. Therefore, disinfectants against these viruses could be evaluated by different methods and surrogate viruses are used as alternative. In this study we developed a method for efficacy testing of veterinary disinfectants using one of the candidate surrogate viruses, bacteriophage MS2, as part of the research on the selection of surrogate viruses for efficiency of efficacy testing of veterinary disinfectants. This method is based on the Animal and Plant Quarantine Agency (APQA) guidelines for efficacy testing of veterinary disinfectants. Bacteriophage and disinfectant are reacted in suspension in accordance with the APQA guidelines and then a newly established double agar layer method is applied for the efficacy test. The double agar layer method is summarized as follows: 1) The bottom agar with 1.5% agar is boiled and cooled before poured into petri dishes at volume of 20 mL, and dried under biological safety cabinet. 2) The top agar with 0.7% agar is boiled and kept at 50℃ before E. coli culture was seeded. 3) The serially diluted bacteriophage MS2-disinfectant mixtures 0.05 mL and E. coli host 0.01 mL (OD₆₀₀ 0.2~0.3) are mixed with 5 mL of top agar and incubate them at 50℃ for 5 min for reaction. 4) The resulting mixture is poured over top of a bottom agar plate and rocked sufficiently to ensure that the top agar covers the entire surface of the bottom agar. 5) The double agar layer is then placed under biological safety cabinet to allow the agar layer to solidify and subsequently incubated at 37℃ for 24 hr. 6) Following incubation, the plates may be inspected for plaques and record results.