• Korean Journal of Environmental Agriculture
• /
• v.17 no.2
• /
• pp.164-169
• /
• 1998

In order to evaluate the utility of the bituminous coal fly ash, gypsum, oyster shell as soil amendments, acid sandy loam soil with low boron content were amended in the upper 15cm with amendments, and then chinese cabbage was cultivated in fall. Amendments treated were, in metric tons per hectare, i ) none(Check) ; ii) 80 fly ash(FA) ; iii) 4shell(SH) ; iv) 56 fly ash+24gypsum (FG) ; v) 40 fiy ash + 24 gypsum +0.8 shell(FGS). On the whole, amendments imoroved soil chemical properties and contents of N, P, K, Ca, and B in leaves. Among treatmens, FA prominently neutralized soil pH and increased available $P_2O_5$ ,B but decreased Fe contents in soils. FGS also affected the increment of exchangeable Ca, Mg, and available B. Yield response in fresh weight of chinese cabbage was in order of 85% for FGS>77% for FG>66% FA>5% for SH plants. Reducing sugar and vitamin-C contents of leaves depending on treatments showed the same tendencies as that in yields, whereas crude fiber opposite to theme. In particular, FA, FG, and FGS plants showed normal growth without boron deficiency symotoms which appeared in Check and SH plants.Taken together, FGS was an effective combination enable to maximize the utility of fly ash, gypsum, and shell as soil amemdments, especially in cabbage yield and quality.

• Journal of the Optical Society of Korea
• /
• v.19 no.6
• /
• pp.705-710
• /
• 2015

The fabrication process of thin boron-doped nanocrystalline diamond (B-NCD) microelectrodes on fused silica single mode optical fiber cladding has been investigated. The B-NCD films were deposited on the fibers using Microwave Plasma Assisted Chemical Vapor Deposition (MW PA CVD) at glass substrate temperature of 475 ℃. We have obtained homogenous, continuous and polycrystalline surface morphology with high sp³ content in B-NCD films and mean grain size in the range of 100-250 nm. The films deposited on the glass reference samples exhibit high refractive index (n=2.05 at λ=550 nm) and low extinction coefficient. Furthermore, cyclic voltammograms (CV) were recorded to determine the electrochemical window and reaction reversibility at the B-NCD fiber-based electrode. CV measurements in aqueous media consisting of 5 mM K₃[Fe(CN)₆] in 0.5 M Na₂SO₄ demonstrated a width of the electrochemical window up to 1.03 V and relatively fast kinetics expressed by a redox peak splitting below 500 mV. Moreover, thanks to high-n B-NCD overlay, the coated fibers can be also used for enhancing the sensitivity of long-period gratings (LPGs) induced in the fiber. The LPG is capable of measuring variations in refractive index of the surrounding liquid by tracing the shift in resonance appearing in the transmitted spectrum. Possible combined CV and LPG-based measurements are discussed in this work.

• Korean Journal of Medicinal Crop Science
• /
• v.18 no.4
• /
• pp.273-279
• /
• 2010

The study result survey platycodon cultivation regions of Jinju(2), Sacheon(4), Hapcheon(3), Haman(3), and Sancheong(3) of Gyongnam regarding chemical properties of soil, inorganic nitrogen phosphorus by type of composition is as follows: pH and EC value were highest where platycodon cultivated for under 3 years in soils. Content of O.M equal to or less than 25 mg $kg^{-1}$, the average value for platycodoncultivation in korea. Content of exchangeable calcium in soils were 12, 14 $cmol^+kg^{-1}$ in Hapcheon and Haman regions where platycodon was cultivated for two years which is 2~3 time higher level compared with the average upland soil of korea. Water solution boron confirmed approximated level of 3.0 mg $kg^{-1}$ in all survey regions, and the finding is about five times higher than average upland soil of korea which is 0.5 mg $kg^{-1}$. In the case of nitrogen, a significant difference was found depending on cultivation regions and continuous culture. Content of nitrogen in soils were difference according to cultivation area and continuous culture. The composition ratio according to the type of inorganic phosphorus showed the highest in order of Al-P > Ca-P > Fe-P > Saloid-P in all survey regions except for Hapcheon (five, seven years cultivated soils). The correlation showed high significance between available phosphate and inorganic phosphorus.

• Journal of the Korean Ceramic Society
• /
• v.47 no.2
• /
• pp.117-121
• /
• 2010

$SnO_2-(1-x)P_2O_5-xB_2O_3$ glass system were prepared by melt-quenching technique in the compositional series containing 50, 55 and 60 mol% of $SnO_2$. Local structure of the glasses was investigated by Raman and FT-IR measurements. A large glass-forming region was found at the phosphate side of the ternary system with homogeneous glasses containing up to 5~25 mol% of $B_2O_3$. According as content of $B_2O_3$ increases, theraml expansion coefficient of glass decreased but transition temperature and softening temperature increased. Because these phenomenon changed local structure of glass. According as content of $B_2O_3$ increases, quantity of bridging oxygen increased. Also, according as content of $SnO_2$ increases, confirmed that quantity of non-bridging oxygen increases.

• Journal of Korean Ophthalmic Optics Society
• /
• v.8 no.1
• /
• pp.17-22
• /
• 2003

The experimental FT-IR spectra and DTA curves of the $PbO-Bi_2O_3-B_2O_3-SiO_2$ glasses have been investigated. The composition ratio dependence of glass transition temperature showed that the structure of this glass system changes at 60 mol% $Bi_2O_3$. We have observed that the FT-IR spectra of the investigated samples with high bismuth content are dominated by bands associated to the structural units of the heaviest cation, $Bi^{3+}$ and the boron atoms in the treated samples are three and four coordinated even for very high $Bi_2O_3$ content. The low intensity of these non-bridging oxygen bands, for high PbO content glasses, can be attributed to the strong network-forming roles of PbO. The glasses absorption bands exhibited a greater change in intensities on crystallization.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.131-131
• /
• 2011

이종접합 태양전지 제작을 위해 기판의 buffer layer로 사용되는 기존의 a-Si 박막을 SiON 박막으로 대체하려는 연구가 진행 중이다. 기존의 a-Si 박막은 대면적에서 균일도를 담보하기 어렵고, 열적 안정성에 취약한 문제점이 있다. 이에 반해 SiON 박막은 일종의 화학 반응인 oxidation 방법으로 형성이 되기 때문에 막의 균일도를 담보 할 수 있고, $400^{\circ}C$이상의 온도에서 형성되기 때문에 열적 안정성이 우수한 장점이 있다. 이러한 장점에도 불구하고 기판위에 직접 형성이 되기 때문에 기판과 SiON 계면 사이의 pssivation이 무엇보다 중요하다. 본 연구에서는 비정질 실리콘 이종접합 태양전지에 적용키 위한 SiON 박막을 형성하고, 기판과 SiON 계면에서의 passivation 향상을 위한 계면 결함 감소에 대한 연구를 진행하였다. 실험을 위한 SiON 박막은 공정온도 $450^{\circ}C$, 공정압력 100 mTorr, 증착파워 120 mW/cm2에서 5분간 증착하였으며, 이때 50 sccm의 N2O 가스를 주입하였다. 증착된 박막은 2~4 nm의 두께로 증착이 되었으며, 1.46의 광학적 굴절률을 가지는 것으로 분석되었다. 계면의 결함을 줄이기 위해 PECVD를 이용한 NH3 plasma treatment를 실시하였다. 공정온도 $400^{\circ}C$, 공정압력 150mTorr~450 mTorr, 플라즈마 파워 60mW/cm2에서 30분간 진행하였으며, 50 sccm의 N2O 가스를 주입하였다. 계면의 결함이 줄었는지 확인하기 위해 C-V 측정을 위한 시료를 제작하여 분석을 하였다. 실험 결과 VFB가 NH3 plasma treatment 이후 positive 방향으로 shift 됨을 알 수 있었다. Dit 분석을 통해 공정 압력 450 mTorr에서 $4.66{\times}108$[cm2/eV]로 가장 낮은 계면 결함 밀도를 확인 할 수 있었다. 결과적으로 NH3 plasma 처리를 통해 positive charge를 갖는 N-content가 형성되었음을 예측해 볼 수 있으며, N-content가 증가하면, 조밀한 Si-N 결합을 형성하면서, boron 및 phosphorus diffusion을 막는데 효과적이다. 또한, plasma treatment 과정에서 H-content에 의한 passivation 효과를 기대할 수 있다.

• Korean Journal of Environmental Agriculture
• /
• v.24 no.1
• /
• pp.12-16
• /
• 2005

As a silicate source to rice, a coal ash was selected and mixed with phosphor-gypsum (50:50, wt $wt^{-1}$) to reduce the potential of boron toxicity and to supply calcium element. We expected that high con tent of calcium in this mixture might convert water-soluble phosphorus to less soluble forms and then reduce the release of soil phosphorus to surface runoff. The mixture was applied with the rate of 0, 20, 40, and 60 Mg $ha^{-1}$ in paddy soil (Nagdong series, a somewhat excessively drained loamy fine sand) in Daegok, Jinju, Korea The mixture reduced significantly water-soluble phosphorus (W-P) in the surface soils by shifting from W-P and Fe-P to Ca-P and Al-P during whole rice cultivation. In contrast with W-P, plant available phosphorus increased significantly with the mixture application due to high content of phosphorus and silicate in the mixture. The mixture of coal ash and phosphor-gypsum (50:50, wt $wt^{-l}$) would be a good alternative to reduce a phosphorus export in rice paddy soil together with increasing rice yields.

• Journal of Powder Materials
• /
• v.20 no.5
• /
• pp.366-370
• /
• 2013

The effects of $B_4C$ on the mechanical properties of WC/Ni-Si hardmetal were analyzed using sintered bodies comprising WC(70-x wt.%), Ni (28.5 wt.%), Si (1.5 wt.%), and $B_4C$ (x wt.%), where $$0{\leq_-}x{\leq_-}1.2$$ wt.%. Samples were prepared by a combination of mechanical milling and liquid-phase sintering. Phase and microstructure characterizations were conducted using X-ray diffractometry, scanning electron microscopy, and electron probe X-ray micro analysis. The mechanical properties of the sintered bodies were evaluated by measuring their hardness and transverse rupture strength. The addition of $B_4C$ improved the sinterability of the hardmetals. With increasing $B_4C$ content, their hardness increased, but their transverse rupture strength decreased. The changes of sinterability and mechanical properties were attributed to the alloying reaction between $B_4C$ and the binder metal (Ni, Si).

• Nuclear Engineering and Technology
• /
• v.46 no.5
• /
• pp.675-680
• /
• 2014

Pulverization of two different sized micro-$B_4C$ particles (${\sim}10{\mu}m$ and ${\sim}150{\mu}m$) was investigated using a STS based high energy ball milling system. Shapes, generation of the impurities, and reduction of the particle size dependent on milling time and initial particle size were investigated using various analytic tools including SEM-EDX, XRD, and ICP-MS. Most of impurity was produced during the early stage of milling, and impurity content became independent on the milling time after the saturation. The degree of particle size reduction was also dependent on the initial $B_4C$ size. It was found that the STS nanoparticles produced from milling is strongly bounded with the $B_4C$ particles forming the $B_4C$/STS composite particles that can be used as a neutron absorbing nanocomposite. Based on the morphological evolution of the milled particles, a schematic pulverization model for the $B_4C$ particles was constructed.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.11
• /
• pp.3239-3242
• /
• 2013

An improved rapid method for determination of the fatty acid composition using modified methylation procedure was compared with the AOAC reference procedure based on the methylation of fatty acid with the addition of BF3 catalyst before and while heating. The new method is useful for research and routine quality control and has a number of advantages over the reference procedure which are more rapid, simple and also reliable. Applicability of the modified methylation method was confirmed with three vegetable oil samples (palm oil, coconut oil and olive oil). Based on the validation method results, we obtained that a quite linear calibration curve of fatty acids was performed with $R^2$ in range of 0.9972-0.9994. The sensitivity of gas chromatography instrument was able to analyze the fatty acids up to a few ppm, the precision and accuracy were good enough with the %RSD between 1.5%-19.5% and the recovery of linolenic acid was 99.1% in the range of 80.0%-113.3%.