• Title/Summary/Keyword: Boost 컨버터

Search Result 743, Processing Time 0.044 seconds

Failure-rate Comparison of Buck Converter and Buck-Boost Converter (벅 컨버터와 벅-부스트 컨버터의 고장률 비교)

  • Kwak, Yun-gi;Heo, Dae-ho;Kang, Feel-soon
    • Proceedings of the KIPE Conference
    • /
    • 2020.08a
    • /
    • pp.445-446
    • /
    • 2020
  • 본 논문에서는 동일한 설계조건을 갖는 벅 컨버터와 벅-부스트 컨버터를 신뢰성의 측면에서 비교한다. 신뢰성 분석의 대표적인 지표의 고장률과 평균 고장 시간(Mean time between failure, MTBF)을 도출하기 위해 고장나무 분석(Fault-tree analysis, FTA)을 사용한다. FTA는 컨버터의 동작 특성을 고려하여 고장의 원인과 영향을 나타내는 방법으로 컨버터를 구성하는 부품의 고장률은 MIL-HDBK-217F의 값을 사용한다. FTA를 통해 벅 컨버터의 고장률과 벅-부스트 컨버터의 고장률을 도출하고 고장률 차이의 원인을 분석하며 두 컨버터의 동작 온도별 고장률을 그래프로 나타내어 시각화한다.

  • PDF

Comparative Study between Two and Single-loop Control of Boost Converter for PVPCS (태양광용 부스트 컨버터의 2중 루프 제어 및 단일 루프 제어의 특성 비교)

  • Kim, Dong-Whan;Im, Ji-Hoon;Song, Seung-Ho;Choi, Ju-Yeop;An, Jin-Ung;Lee, Sang-Chul;Lee, Dong-Ha
    • 한국태양에너지학회:학술대회논문집
    • /
    • 2012.03a
    • /
    • pp.153-159
    • /
    • 2012
  • In photovoltaic system, the characteristic of photovoltaic module such as open circuit voltage and short circuit current will be changed because of cell temperature and solar radiation. Therefore, a boost converter of the PV system connects between the output of photovoltaic system and DC link capacitor of grid connected inverter as controlling duty ratio for maximum power point tracking(MPPT). This paper shows the dynamic characteristic of the boost converter by comparing single-loop control algorithm and two-loop control algorithm using both analog and digital control. The proposed both compensation method has been verified with computer simulation and simulation results obtained demonstrate the validity of the proposed control schemes.

  • PDF

A Maximum Power Point Tracking circuit for Thermoelectric Generators using a Boost DC-DC converter (부스트 컨버터를 이용한 열전소자의 최대전력점 추적회로)

  • Park, Jung-Yong;Kim, Shi-Ho
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.48 no.10
    • /
    • pp.15-19
    • /
    • 2011
  • We have proposed a maximum power point tracking (MPPT) circuit for thermoelectric generator (TEG) using a Boost converter. The key point of the proposed MPPT circuit is that the duty ratio of the boost converter automatically moves to Maximum Power Point by comparing of consecutive sampling voltage using two comparators. From the simulation results, we showed that the proposed circuit can find the maximum power point within 2 CLK periods and to generate optimal PWM signal within 3 CLK periods. The proposed MPPT circuit was designed by using a CMOS 0.18 um process, and it is now on the fabrication.

The Secondary LLC Series Resonant Converter for the Boost DC/DC Converter (변압기 2차측 LLC 직렬공진컨버터 적용 승압형 DC/DC 컨버터)

  • Lee Hyun-Kwan;Lee Gi-Sik;Chung Bong-Geon;Kong Young-Su;Kim Eun-Soo;Cha In-Su;Yoon Jeong-Phil
    • Proceedings of the KIPE Conference
    • /
    • 2006.06a
    • /
    • pp.277-280
    • /
    • 2006
  • Recently, the high frequency isolated boost DC/DC converter has been widely used for the PCS (Power Conditioning System) system because of its small size and low cost. However, the high frequency isolated boost DC/DC converters applied the conventional voltage-fed converter and current-fed converter have the problems such as the high conduction losses and the surge voltage due to the high circulating current and the leakage inductance, respectively. To overcome this problems, in this paper the secondary LLC resonant converter is proposed, and the experimental results of the secondary LLC series resonant converter for boost DC/DC converter are verified on the simulation based on the theoretical analysis and the 1kW experimental prototype.

  • PDF

A study on Photovoltaic System to Considers a Solar Position Tracker for Air Conditioner a Clinic room (병실 냉.난방장치용 태양 위치 추적기를 이용한 태양광 발전시스템에 관한 연구)

  • Hwang, Lark-Hoon;Na, Seung-Kwon
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.8 no.6
    • /
    • pp.1355-1362
    • /
    • 2007
  • In this paper, these setting can be useful in the microprocessor and sensor that designed to improve the efficiency of the photovoltaic system the photovoltaic position tracker device, and compared the normal photovoltaic system of fixed form with the photovoltaic system of solar position tracked form. Moreover, this is compared the catalogue of solar cell module and the simulation through a mathematics modelling with the solar cell's characteristic interpreting and that is composed an power conversion system with boost converter and voltage source inverter. This device can be used to the constant voltage control method for maximum power point tracking in boost converter control. Experiment Results is shown that using a SPWM(Sinusoidal Pulse Width Modulation) control method in inverter control.

  • PDF

Buck and Boost Photovoltaic Converter Driving Schemes under Low power level (태양광 저에너지 출력을 위한 Buck, Boost 컨버터 구동방식)

  • Kim, B.W.;Park, S.J.;Kim, K.H.;Son, M.H.;Cho, S.E.;Kim, C.U.
    • Proceedings of the KIPE Conference
    • /
    • 2005.07a
    • /
    • pp.669-672
    • /
    • 2005
  • Normally, the buck converter is used for the charging converter of photovoltaic generator because this converter has good characteristics compare with boost and buck-booster converter But, in case of the sollar-cell voltage is lower than charging voltage, we cannot charge the sollar energy to the charger. So, in this paper, we proposed the novel hybrid converter using by combination of buck and boost converter for the charging converter of photovoltaic generator, as a results, it can operate buck, boost and buck-boost mode. The proposed novel converter has the same characteristics of the existent buck converter and furthermore it can operate as a boost converter. So, we can make the more effective photovoltaic charging system.

  • PDF

Feedback Differential Power Processing System using Boost-forward converter for Voltage balancing (전압 밸런싱을 위한 부스트-포워드 컨버터를 이용한 피드백 방식 차동전력조절 시스템)

  • Kim, Kyoung-Tak;Park, Joung-Hu
    • Proceedings of the KIPE Conference
    • /
    • 2016.07a
    • /
    • pp.205-206
    • /
    • 2016
  • 본 논문에서는 전압 밸런싱을 위한 부스트-포워드 컨버터를 이용한 피드백 방식 차동전력조절(DPP, Differential Power Processing) 시스템을 제안한다. 이 시스템은 서로 직렬 연결된 태양광패널을 입력으로 연결된 상태에서 DPP 컨버터가 각 태양광패널에 병렬로 연결된다. 또한 DPP 컨버터의 출력도 직렬로 연결되고 전체는 부스트 컨버터에 의해 통합되어 최종적으로 인버터를 통해 계통 및 기타 시스템에 연결된다. 이러한 구조의 DPP 시스템은 태양광패널 중의 한 부분에 그늘짐 현상이 발생할 경우 DPP 컨버터의 출력에 영향을 미치게 되어 전압불균형이 발생한다. 이는 전체 시스템의 효율과 인버터와 같은 계통과 연결 시 정상작동 여부에 큰 영향을 미칠 수 있기 때문에 DPP 컨버터 출력부의 전압 밸런싱을 수행하는 회로가 필요하다. 제안하는 회로는 이러한 DPP 시스템에서 적용할 수 있는 부스트-포워드 컨버터를 이용한 전압 밸런싱 회로이다. 이를 검증하기 위하여 컴퓨터 시뮬레이션을 이용하였다.

  • PDF

Single-Phase Boost DC-AC Inverter System by Z-Source DC-DC Converters (Z-소스 DC-DC 컨버터에 의한 단상 부스트 DC-AC 인버터 시스템)

  • Kim, S.J.;Jung, Y.G.;Lim, Y.C.
    • Proceedings of the KIPE Conference
    • /
    • 2010.07a
    • /
    • pp.365-366
    • /
    • 2010
  • 본 논문에서는 양방향성 Z-소스 DC-DC 컨버터 2대를 이용한 단상 Z-소스 부스트 인버터를 설계하고 분석하였다. 두 대의 컨버터를 이용한 인버터 시스템은 종전의 PWM 인버터 시스템과 달리 두 컨버터에서 출력되는 두 교류 출력을 이용한 것으로 전체 시스템의 교류 출력전압에 포함된 고조파가 낮다. 또한, 컨버터 내부를 구성하는 L-C로 인해 추가적인 출력필터 설계가 불필요 하다는 장점이 있다. 본 연구에서는 종전의 부스트 컨버터 또는 벅-부스트 컨버터 방식이 아닌 두 대의 Z-소스 DC-DC 컨버터를 입력 DC전원과 출력 부하를 공통으로 하는 단상 인버터 시스템을 구성하고, 교류 출력파형 및 제어방법과 동작특성을 분석하였다.

  • PDF

Characteristics analysis of PFC boost converter with soft switching for harmonics reduction (고조파 저감을 위한 소프트 스위칭 승압형 PFC컨버터의 특성해석)

  • 김봉규
    • Proceedings of the KIPE Conference
    • /
    • 2000.07a
    • /
    • pp.150-154
    • /
    • 2000
  • This paper proposes PFC boost converter with soft switching for harmonics decrement and analyzes characteristics of PFC boost converter. In this technique power factor correction(PFC) is usually obtained by operating the PFC stage in the discontinuous current mode(DCM) Switching devices are operated for reducing current stress and electronical noise. As a result eliminate 3rd harmonic component and high power factor(PF) of the input line are verified by characteristics analysis and experimental results.

  • PDF

Characteristic Analysis of Multi-Phase Interleaved Boost Converter in Discontinuous Inductor Current Mode (불연속 전류모드에서의 다상 교호 승압컨버터의 특성 해석)

  • Jang, Eun-Sung;Chung, Se-Kyo;Shin, Hwi-Beom
    • The Transactions of The Korean Institute of Electrical Engineers
    • /
    • v.56 no.5
    • /
    • pp.898-904
    • /
    • 2007
  • This paper presents the generalized and explicit expressions for evaluating the performance of the multi-phase interleaved boost converter (IBC) operating in discontinuous inductor current mode (DICM). The full order averaged model is derived. The generalized transfer functions of interest are presented and the dynamic characteristics are analyzed. The generalized analysis of converter performance is verified through the experimental and simulation results.