• 제목/요약/키워드: Boost

검색결과 2,871건 처리시간 0.038초

Voltage Sag 보상을 위한 승압형 단상 인버터 시스템에 관한 연구 (A Study on Boost Type Single-Phase Inverter System for Compensation of Voltage Sag)

  • 서영민;이승용;홍순찬
    • 조명전기설비학회논문지
    • /
    • 제25권11호
    • /
    • pp.50-57
    • /
    • 2011
  • This paper proposes a boost type single-phase inverter system to compensate the voltage sag appeared on source side. The proposed system is composed of a boost converter, a PWM inverter, and a bypass diode. If the voltage sag has appeared in input voltage, the boost converter would be operated to compensate it in the proposed system. The boost converter would not be operated when the magnitude of input voltage is more than 0.9 pu. The output voltage is kept constant by a direct-quadrature frame controller in the inverter. A 300 W class boost type inverter system was simulated, and the validity of the proposed system was verified by carrying out experiments.

태양광 저에너지 출력을 위한 Buck, Boost 컨버터 구동방식 (Buck and Boost Photovoltaic Converter Driving Schemes under Low power level)

  • 김병우;박성준;김광헌;손무헌;조수억;김철우
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2005년도 전력전자학술대회 논문집
    • /
    • pp.669-672
    • /
    • 2005
  • Normally, the buck converter is used for the charging converter of photovoltaic generator because this converter has good characteristics compare with boost and buck-booster converter But, in case of the sollar-cell voltage is lower than charging voltage, we cannot charge the sollar energy to the charger. So, in this paper, we proposed the novel hybrid converter using by combination of buck and boost converter for the charging converter of photovoltaic generator, as a results, it can operate buck, boost and buck-boost mode. The proposed novel converter has the same characteristics of the existent buck converter and furthermore it can operate as a boost converter. So, we can make the more effective photovoltaic charging system.

  • PDF

능동 클램프 풀브릿지 부스트 컨버터에 대한 모델링 및 분석 (Modeling and Analysis of Active-Clamp, Full-Bridge Boost Converter)

  • 김만고
    • 전력전자학회논문지
    • /
    • 제10권2호
    • /
    • pp.169-176
    • /
    • 2005
  • 본 논문에서는 능동 클램프 풀브릿지 Boost 컨버터에 관한 DC 모델링과 AC 모델링 과정에 대하여 기술한다. 동작 원리로부터 이 컨버터의 교류 부분을 등가의 직류 부분으로 바꾸고 반도체 스위치를 재배치하여 개념적인 등가 회로가 유도된다. 유도된 등가회로는 CCM(Continuous conduction mode) Boost 컨버터와 DCM(Discontinuous conduction mode) Buck 컨버터로 표현된다. 유도된 등가회로의 각 스위치 부분을 PWM 스위치 모델로 대체하여 DC 모델 및 AC 모델이 완성된다. 이론적인 DC 및 AC 모델링 결과는 실험이나 SIMPLIS 시뮬레이션을 통해 검증된다.

AdaBoost와 ASM을 활용한 얼굴 검출 (Face Detection using AdaBoost and ASM)

  • 이용환;김흥준
    • 반도체디스플레이기술학회지
    • /
    • 제17권4호
    • /
    • pp.105-108
    • /
    • 2018
  • Face Detection is an essential first step of the face recognition, and this is significant effects on face feature extraction and the effects of face recognition. Face detection has extensive research value and significance. In this paper, we present and analysis the principle, merits and demerits of the classic AdaBoost face detection and ASM algorithm based on point distribution model, which ASM solves the problems of face detection based on AdaBoost. First, the implemented scheme uses AdaBoost algorithm to detect original face from input images or video stream. Then, it uses ASM algorithm converges, which fit face region detected by AdaBoost to detect faces more accurately. Finally, it cuts out the specified size of the facial region on the basis of the positioning coordinates of eyes. The experimental result shows that the method can detect face rapidly and precisely, with a strong robustness.

에너지 수확을 이용한 Boost 컨버터가 내장된 MCU의 활용 (Applications of MCU with built-in Boost Converter using Energy Harvesting)

  • 김혁진;정교범
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2010년도 하계학술대회 논문집
    • /
    • pp.89-90
    • /
    • 2010
  • 본 논문에서는 MCU(ATtiny 43U)에 내장된 Boost 컨버터를 이용하여 열전에너지를 수확하고, 프로그램을 기동하는 방안을 제안한다. ATtiny 43U에 내장된 Boost 컨버터는 1~3[V] 입력전압을 직류 3[V]로 승압하여 ATtiny 43U를 정상적으로 동작시킨다. ATtiny 43U의 Boost 컨버터와 열전소자를 활용하여 에너지 수확 시스템을 구성하고 배터리의 필요성을 제거하였으며, 지능형 에너지 수확 시스템을 구성하였다.

  • PDF

동기형 소프트 스위칭 부스트 컨버터 (Synchronous Soft Switching Boost Converter)

  • 김준구;김재형;원충연;정용채
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2008년도 하계학술대회 논문집
    • /
    • pp.187-189
    • /
    • 2008
  • This paper presents the synchronous soft switching boost converter. It is shown that the proposed converter effectively reduces conduction loss by using MOSFET device in place of diode in the conventional boost converter. Also, this soft switching boost converter can reduce switching loss using ZVS method through resonant inductor and capacitor. The proposed synchronous soft switching boost converter is suitable for PV generation system.

  • PDF

디지털 임계 도통 모드 Boost PFC의 입력 필터 효과 보상 (Compensation of input filter for digital boundary conduction mode boost PFC)

  • 김종우;문건우
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2015년도 전력전자학술대회 논문집
    • /
    • pp.185-186
    • /
    • 2015
  • 본 논문에서는 임계 도통 모드 boost PFC의 입력 필터 효과를 보상하기 위한 온-타임 변경 기법에 대하여 제안한다. 임계 도통 모드 boost PFC의 입력 필터는 총 입력전류의 위상을 진상으로 만들게 되며, 이 영향은 성능의 하락을 초래하게 된다. 본 논문에서는 디지털 boost PFC의 진상 전류를 보상하기 위한 온-타임 변경 profile을 제시하였다. 제안된 방법의 효과는 90-230Vrms 입력, 200W 출력의 prototype 의 실험을 통하여 검증되었다.

  • PDF

시간 간격 특징 벡터를 이용한 AdaBoost 기반 제스처 인식 (AdaBoost-Based Gesture Recognition Using Time Interval Trajectory Features)

  • 황승준;안광표;박승제;백중환
    • 한국항행학회논문지
    • /
    • 제17권2호
    • /
    • pp.247-254
    • /
    • 2013
  • 본 논문에서는 키넥트 센서를 이용한 AdaBoost 기반 제스처 인식에 관한 알고리즘을 제안한다. 최근 스마트 TV에 대한 보급으로 관련 산업이 주목받고 있다. 기존 리모컨을 이용하여 TV를 컨트롤 하던 시대에서 벗어나 제스처를 이용하여 TV를 컨트롤 할 수 있는 새로운 접근을 제안한다. AdaBoost 학습 모델에 신체 정규화 된 시간 간격 특징 벡터의 집합을 특징 패턴으로 하여, 속도가 다른 동작들을 인식할 수 있도록 하였다. 또한 속도가 다른 다양한 제스처를 인식하기 위해 다중 AdaBoost 알고리즘을 적용하였다. 제안된 알고리즘을 실제 동영상 플레이어와 연결하여 적용하였고, 실험 후 좌표 변화를 이용한 알고리즘에 비해 정확도가 향상되었음을 확인하였다.

A Buck-Boost Type Charger with a Switched Capacitor Circuit

  • Wu, Jinn-Chang;Jou, Hurng-Liahng;Tsai, Jie-Hao
    • Journal of Power Electronics
    • /
    • 제15권1호
    • /
    • pp.31-38
    • /
    • 2015
  • In this paper, a buck-boost type battery charger is developed for charging battery set with a lower voltage. This battery charger is configured by a rectifier circuit, an integrated boost/buck power converter and a switched capacitors circuit. A boost power converter and a buck power converter sharing a common power electronic switch are integrated to form the integrated boost/buck power converter. By controlling the common power electronic switch, the battery charger performs a hybrid constant-current/constant-voltage charging method and gets a high input power factor. Accordingly, both the power circuit and the control circuit of the developed battery charger are simplified. The switched capacitors circuit is applied to be the output of the boost converter and the input of the buck converter. The switched capacitors circuit can change its voltage according to the utility voltage so as to reduce the step-up voltage gain of the boost converter when the utility voltage is small. Hence, the power efficiency of a buck-boost type battery charger can be improved. Moreover, the step-down voltage gain of the buck power converter is reduced to increase the controllable range of the duty ratio for the common power electronic switch. A prototype is developed and tested to verify the performance of the proposed battery charger.

New Active Snubber Boost PFC Converter for Efficiency Improvement in Home Appliances Applications

  • Jeong, In Wha;Park, Mingyu;Um, Kee-Ju;Heo, Chang Jae;Lee, JunHo;Kim, Kwangsoo;Suh, Bum-Seok;Kim, Yong-Wook;Kim, Rae-Young
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2012년도 전력전자학술대회 논문집
    • /
    • pp.289-290
    • /
    • 2012
  • This paper proposes a new active snubber boost PFC converter to provide a zero-voltage-switching (ZVS) turn-on condition and reduce electromagnetic interference (EMI) noise in home appliances and renewable energy applications, including solar or fuel cell electric systems. The proposed active snubber circuit enables a main boost switch of the boost-type PFC or grid converter to turn on under a ZVS condition and reduce the switching losses of the main boost switch. Moreover, for the purpose of a specialized intelligent power module (IPM) fabrication, the proposed boost circuit is designed to satisfy some design aspects such as space saving, low cost, and easy fabrication. Simulation and experimental results of a 2kW IPM boost-type PFC converter are provided to verify the effectiveness of the proposed active snubber boost circuit.

  • PDF