• 대한두개안면성형외과학회지
• /
• 제12권2호
• /
• pp.97-101
• /
• 2011

Purpose: Nasal bone fracture is the most common type of facial bone fracture. The standard 6-view photography was not adequate to support the evaluation of nasal deformity and the results of closed reduction. The authors have standardized a bird's eye view photography to more effectively evaluate this nasal deformity. Methods: We reviewed the medical records and radiologic studies of 63 nasal bone fracture patients. We had taken clinical photography including bird's eye view that was standardized as nasal tip was aligned to Cupid's bow of upper lip and light was focused on the nasion of all 63 patients. Results: Nasal deviations and reductions were more noticeable on the newly standardized bird's eye view. This clinical photography was very useful to explain the results of reduction. Conclusion: It was concluded that this photography can be more reliable for evaluation of severity of nasal deformity and the result of closed reduction.

• 대한치과교정학회지
• /
• 제43권3호
• /
• pp.134-140
• /
• 2013

Objective: To evaluate lower incisor position and bony support between patients with Class II average- and high-angle malocclusions and compare with the patients presenting Class I malocclusions. Methods: CBCT records of 79 patients were divided into 2 groups according to sagittal jaw relationships: Class I and II. Each group was further divided into average- and high-angle subgroups. Six angular and 6 linear measurements were performed. Independent samples t-test, Kruskal-Wallis, and Dunn post-hoc tests were performed for statistical comparisons. Results: Labial alveolar bone thickness was significantly higher in Class I group compared to Class II group (p = 0.003). Lingual alveolar bone angle (p = 0.004), lower incisor protrusion (p = 0.007) and proclination (p = 0.046) were greatest in Class II average-angle patients. Spongious bone was thinner (p = 0.016) and root apex was closer to the labial cortex in high-angle subgroups when compared to the Class II average-angle subgroup (p = 0.004). Conclusions: Mandibular anterior bony support and lower incisor position were different between average- and high-angle Class II patients. Clinicians should be aware that the range of lower incisor movement in high-angle Class II patients is limited compared to average- angle Class II patients.

• 구강회복응용과학지
• /
• 제33권1호
• /
• pp.19-24
• /
• 2017

탄성의치는 심미성, 유연성, 생체적합성 등의 장점이 있어서 최근 많이 사용되고 있다. 그러나 재료 자체의 유연성에 의한 의치의 운동 때문에 안정성에 대한 문제가 제기되고 있다. 저작 시 의치가 조직면으로 움직이면서 지지조직을 자극하게 되고, 이런 자극이 장기간 지속될 경우 외상과 잔존치조제의 급속한 흡수를 야기할 수 있기 때문이다. 본 증례에서는 안정, 유지 및 지지가 부족한 탄성의치를 장기간 사용하면서 지지점막의 지속적인 자극으로 인한 구개골 노출이 발생하였다. 안정성 및 유지력이 확보된 새로운 의치를 제작하여 환자의 불편감이 감소하였고 구개골 노출이 치유되었다. 탄성의치를 사용할 수 있는 증례를 신중하게 선택해야 하며 정기검진 및 적절한 처치를 시행하여 부작용을 예방할 수 있어야 한다.

• 대한치과교정학회지
• /
• 제30권6호
• /
• pp.713-721
• /
• 2000

골세포는 골대사에 영향을 미치는 다양한 성장인자와 싸이토카인을 생성하여 골 기질로 유리시킨다. 이 연구는 쥐의 장골 세포 배양 모델에서 recombinant human IL-$1\beta$가 $PGE_2$ 합성과 plasminogen activator의 활성 조절을 통한 골 흡수 유도 기전의 일단을 구명하고, 이와 동시에 TGF-$\beta$에 의한 골흡수 억제 기전을 해명하는데 그 목적이 있다. 쥐의 장골 세포를 배양하여 통법의 골모세포 phenotype을 발현하는 세포를 분리하고 세포 배양능, alkaline phosphatase assay, PG assay, 골흡수능 측정들을 시행하여 다음의 결과를 얻었다. 1. IL-$1\beta$는 쥐의 골모세포의 증식, $PGE_2$ 생성 및 palsmonogen activator의 활성을 촉진하였다. 2. IL-$1\beta$는 쥐의 골모세포에서의 alkaline phosphatase 활성을 감소시켰다. 3. rhIL-$1\beta$는 골 흡수를 촉진시켰다. 4. TGF-$\beta$는 쥐의 장골 세포에서 골의 흡수를 억제하였으며, Vitamin $D_3$에 의하여 유도된 골 흡수를 억제하였다. 이상의 연구 결과는 IL-$1\beta$에 의한 골 파괴의 병인과 관련하여 골 세포 대사의 병리학적 조절에 있어서의 IL-$1\beta$의 역할을 지지하며, 이와 동시에 골 흡수 억제에 있어서의 TGF-$\beta$의 역할을 확인시켜주는 것으로 생각된다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제16권1호
• /
• pp.50-56
• /
• 2003

An experiment was carried out to compare the body weight, shank length, rectal temperature, comb area, abdominal fat, blood parameters and bone traits of capon, slip and intact birds in Taiwan country chicken cockerels. One hundred and sixty-six Taiwan country chicken cockerels were randomly assigned to caponized or intact male groups. Caponized birds were surgically altered at 10 weeks old and raised to 28 weeks old. At 28 weeks of age, the capons were separated into capon and slip groups, depending on the atrophy of the comb and wattle in size. The results showed that body weight and shank length in slips were significantly (p<0.05) greater than in intact birds. Intact birds had the highest (p<0.05）feather scores and the lowest (p<0.05) rectal temperature. Compared with intact birds and slips, capons had a significantly (p<0.05) smaller comb area. Bone percentage, stress and cortical thickness, and bone and ash calcium content and plasma testosterone concentration, in intact birds were the highest (p<0.05) followed by slips and capons. However, intact birds had the lowest (p<0.05) plasma ionized calcium and phosphorus concentrations. Bone and ash manganese contents in capons were significantly (p<0.05)lower than those in others. These findings support the hypothesis that androgenic effects on secondary sexual characteristics are stronger than anabolic growth promoting response. Androgens can directly influence calcium fluxes in male chickens. Caponized caused a reduction in the bone percentage, stress, cortical thickness and bone calcium content.

• Journal of Periodontal and Implant Science
• /
• 제25권2호
• /
• pp.290-300
• /
• 1995

Tooth mobility is one of the most important clinical parameters in examination, diagnosis, prognosis and treatment planning procedure. In order to determine the differences of tooth mobility according to radiographical bone level, clinical root length, clinical crown/root ratio, and bleeding on probing, 90 male adults with periodontal disease and 10 male adults with periodontal health($25{\sim}45$ years old) were selected through clinical examinations including occlusal relationship, probing depth, attachment level, and bleeding on probing. On the mandibular anterior teeth, standard periapical radiographs were taken, and tooth mobility was measured by Periotest(Siemens Co., Germany). The radiographic bone level of individual tooth was evaluated as coronal 1/3, middle 1/3, and apical 1/3 to anatomical root length, and clinical crown length from incisal edge to bone level and clinical root length from bone level to root apex were measured with Boley gauge, and subsquently clinical crown/root ratio was calculated. The difference of tooth mobility(Periotest value) according to radiographical bone level, clinical root length, clinical crown/root ratio, and bleeding on probing was statistically analyzed by unpaired Student t-test. Tooth mobility was significantly higher in bleeding group than non-bleeding group on probing in the teeth radiographic bone level of middle 1/3, with clinical root length longer than 6mm, and with clinical crown/root ratio over 0.3(p<0.01). But there was no statistical difference in tooth mobility between bleeding group and non-bleeding group on probing in the teeth with radiographic bone level of apical 1/3, with short clinical root length less than 5mm, and with clinical crown/root ratio under 0.2(p>0.05). The results note that the tooth mobility depends on clinical root length, clinical crown/root ratio and gingival inflammation, and in the teeth with relatively good alveolar bone support gingival inflammation is one of the most important factors that affect tooth mobility.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제26권1호
• /
• pp.93-96
• /
• 2000

Bone-anchored auricular prosthesis have been proved that was another apporach to the treatment of the defective external ear. A 19years old woman with hemifacial microsomia was treated with osseointegrated implants for the support of craniofacial prosthesis. 3 implants were placed in temporal region and craniofacial prosthesis was retained with telescopic magnet retention system. The literatures and surgical technique are reviewed and our experience is presented.

• 대한치과보철학회지
• /
• 제29권1호
• /
• pp.1-11
• /
• 1991

A two dimensional finite element method was used to analyze the changes in mechanical behavior of the supporting structures when a fixed prosthesis replaced a mandibular 1st molar. In the unrestored situation as the degree of bone resorption increased, there was a corresponding increase in stress in the periodontium. Tilting of the molar abutment induced the additional stress on the mesial side of the root. The presence of a fixed prosthesis markedly reduced the magnitude and distribution of stress in the periodontium. The mechanical advantage obtained by a fixed prosthesis was greater in the situation of a tilted 2nd molar with reduced bone support than with the higher bone levels.

• Archives of Plastic Surgery
• /
• 제38권4호
• /
• pp.438-444
• /
• 2011

Purpose: Adipose-derived stromal cells (ASCs) are readily harvested from lipoaspirated tissue or subcutaneous adipose tissue fragments. The stromal vascular fraction (SVF) is a heterogeneous set of cell populations that surround and support adipose tissue, which includes the stromal cells, ASCs, that have the ability to differentiate into cells of several lineages and contains cells from the microvasculature. The mechanisms that drive the ASCs into the osteoblast lineage are still not clear, but the process has been more extensively studied in bone marrow stromal cells. The purpose of this study was to investigate the osteogenic capacity of adipose derived SVF cells and evaluate bone formation following implantation of SVF cells into the bone defect of human phalanx. Methods: Case 1 a 43-year-old male was wounded while using a press machine. After first operation, segmental bone defects of the left 3rd and 4th middle phalanx occurred. At first we injected the SVF cells combined with demineralized bone matrix (DBM) to defected 4th middle phalangeal bone lesion. We used P (L/DL)LA [Poly (70L-lactide-co-30DL-lactide) Co Polymer P (L/DL)LA] as a scaffold. Next, we implanted the SVF cells combined with DBM to repair left 3rd middle phalangeal bone defect in sequence. Case 2 was a 25-year-old man with crushing hand injury. Three months after the previous surgery, we implanted the SVF cells combined with DBM to restore right 3rd middle phalangeal bone defect by syringe injection. Radiographic images were taken at follow-up hospital visits and evaluated radiographically by means of computerized analysis of digital images. Results: The phalangeal bone defect was treated with autologous SVF cells isolated and applied in a single operative procedure in combination with DBM. The SVF cells were supported in place with mechanical fixation with a resorbable macroporous sheets acting as a soft tissue barrier. The radiographic appearance of the defect revealed a restoration to average bone density and stable position of pharyngeal bone. Densitometric evaluations for digital X-ray revealed improved bone densities in two cases with pharyngeal bone defects, that is, 65.2% for 4th finger of the case 1, 60.5% for 3rd finger of the case 1 and 60.1% for the case 2. Conclusion: This study demonstrated that adipose derived stromal vascular fraction cells have osteogenic potential in two clinical case studies. Thus, these reports show that cells from the SVF cells have potential in many areas of clinical cell therapy and regenerative medicine, albeit a lot of work is yet to be done.

• Journal of Computational Design and Engineering
• /
• 제3권4호
• /
• pp.385-397
• /
• 2016

Scaffolds are essential in bone tissue engineering, as they provide support to cells and growth factors necessary to regenerate tissue. In addition, they meet the mechanical function of the bone while it regenerates. Currently, the multiple methods for designing and manufacturing scaffolds are based on regular structures from a unit cell that repeats in a given domain. However, these methods do not resemble the actual structure of the trabecular bone which may work against osseous tissue regeneration. To explore the design of porous structures with similar mechanical properties to native bone, a geometric generation scheme from a reaction-diffusion model and its manufacturing via a material jetting system is proposed. This article presents the methodology used, the geometric characteristics and the modulus of elasticity of the scaffolds designed and manufactured. The method proposed shows its potential to generate structures that allow to control the basic scaffold properties for bone tissue engineering such as the width of the channels and porosity. The mechanical properties of our scaffolds are similar to trabecular tissue present in vertebrae and tibia bones. Tests on the manufactured scaffolds show that it is necessary to consider the orientation of the object relative to the printing system because the channel geometry, mechanical properties and roughness are heavily influenced by the position of the surface analyzed with respect to the printing axis. A possible line for future work may be the establishment of a set of guidelines to consider the effects of manufacturing processes in designing stages.