• 제목/요약/키워드: Bonding method

검색결과 1,374건 처리시간 0.027초

비무장지대 출토 군화의 형태 복원을 위한 3차원 디지털 기술의 적용 및 보존처리 (Application and conservation of 3D technology for the restoration of the original shape of military boots excavated in the DMZ)

  • 오승준;위광철
    • 헤리티지:역사와 과학
    • /
    • 제56권2호
    • /
    • pp.124-133
    • /
    • 2023
  • 국방부 유해발굴단을 통해 발굴된 한국전쟁 전사자 유품의 보존 방법론을 제시하고자 3D 기술의 적용과 가역성 및 안정성이 우수한 보존 재료를 이용해 군화류 2점에 대한 보존처리를 진행하였다. 3D 스캐닝과 모델링을 통해 군화를 신었던 전사자의 발 사이즈를 추정해 볼 수 있었으며, 이를 기반으로 3D 출력 구조체를 이용해 원형을 복원하였다. 원형 복원은 출토 유품의 오염물 제거와 유연제 처리 작업을 거쳐 구조체의 형태로 복원하였으며, 열화되어 찢겨지거나 멸실된 부분은 접합 및 메움처리 후 고색처리를 통해 원형을 복원하였다. 보존처리 후 2종의 군화 모두 밑창과 발등 부분은 고무류, 발등 일부와 발목 부분은 합성가죽류로 제작된 것을 확인할 수 있었으며, 이는 방수 또는 방한의 목적으로 제작되어 1944년에 도입된 모델 Shoe Pac(M-1944, 12-inch) 방한화와 유사한 군화임을 확인하였다. 이러한 결과는 보존처리를 통해 출토된 유품의 제작기법과 재질, 용도 등을 밝혀낼 수 있음을 확인한 연구로서 과학적 보존처리와 3D 기술의 융합적 연구의 중요성을 보여준 사례이다.

그래핀 옥사이드(Graphen Oxide, GO)와 환원 그래핀의 (Reduced graphe oxide, R-GO)의 물리화학적 특성 연구 (Research on Physicochemical Properties of Graphene Oxide (GO) and Reduced Graphene Oxide (R-GO) )

  • 김무선;이호용;최성웅
    • Composites Research
    • /
    • 제36권3호
    • /
    • pp.167-172
    • /
    • 2023
  • 복합재료 제작 기술은 저비용, 유연성 그리고 용이한 가공성 등을 그대로 유지하면서 필러(filler)의 특성을 부여하는 방법을 지향하고 있으며 다양한 기능성 복합재료 개발로 이루어지고 있다. 기능성 복합재 구현과 관련하여 그래핀(Graphene)을 필러로 사용하는 복합재료의 고성능화 연구가 활발히 진행되고 있다. 본 연구에서는 기능성 물성치 향상을 위해 많이 사용되는 그래핀을 이용하여 물리 화학적 물성치를 고찰하였다. 대표적 filler인 graphane nanoplatelet(GNP)을 사용하여 그래핀 옥사이드(graphene oxide, GO)를 제조하였고 그래핀 옥사이드(GO) 를 환원시켜 reduced graphene oxide(R-GO)를 형성하였다. 각기 제조된 GO와 R-GO의 물성치를 분석하였고 이를 GNP 분석결과와 비교하여 제조된 방법의 신뢰성을 검토하였다. Raman 분광법에 의한 분석 결과 R-GO의 경우 GO에 비해 D-peak와 G-peak의 강도의 감소를 확인할 수 있었고 ID/IG의 비를 통해 0.08의 증가 값을 볼 수 있었다. FTIR을 이용한 GNP, GO 및 R-GO의 작용기 분석 결과 C-C, C=C의 반복되는 연결 구조를 가진 GNP와는 다르게 GO 및 R-GO의 경우 명확한 peak를 통해 C-O 결합, C=C 결합, C=O 결합 및 O-H 결합을 확인할 수 있었다. X-ray 회절 분석 결과 GNP는 (002) 평면 특성의 25.86°에서 넓은 회절의 peak를 보인 반면 GO와 R-GO는 (001), (100) 평면에 해당하는 peak를 볼 수 있었고 GO의 층간거리는 GNP에 비해 약 2.6배 증가한 것을 확인할 수 있었다.

양생방법에 따른 고결모래의 일축압축강도 특성 (Effect of Different Curing Methods on the Unconfined Compressive Strength of Cemented Sand)

  • 박성식;김기영;최현석;김창우
    • 대한토목학회논문집
    • /
    • 제29권5C호
    • /
    • pp.207-215
    • /
    • 2009
  • 시멘트 혼합토나 콘크리트는 일반적으로 습윤상태를 유지하면서 양생이 되며 양생기간이 늘어남에 따라 수화작용으로 강도는 증가한다. 하지만 양생기간 동안 시멘트 혼합토에 충분한 수분이 공급되지 않을 경우 이는 수화작용에 영향을 미치고 결국 시멘트 혼합토의 강도 변화를 가져오게 된다. 본 연구에서는 시멘트비가 20% 미만인 시멘트 혼합토가 현장에서 시공 될 때 발생할 수 있는 수분공급 조건을 고려하여 네 가지 양생방법(대기중 양생, 밀봉 양생, 습윤 양생, 수중 양생)으로 제작된 고결모래의 양생조건에 따른 일축압축강도의 특성을 비교하였다. 전기간(3일) 대기중 양생한 공시체의 강도는 시멘트비가 10% 미만인 경우 밀봉 및 습윤 양생한 공시체보다 크지만 시멘트비가 10% 이상인 경우는 더 작았다. 시멘트비에 관계 없이 대기중 양생한 공시체가 수중 양생한 공시체보다 더 큰 강도를 발휘하였다. 양생방법이 동일한 경우 시멘트비 4%의 강도를 기준으로 시멘트비 증가에 따른 강도 증가율은 대기중 양생한 공시체가 가장 낮았으며, 밀봉, 습윤 및 수중 양생한 공시체의 강도는 시멘트비 증가율의 제곱으로 증가하였다. 공시체를 2일 양생 후 1일 동안 수침시켰을 때 밀봉 또는 습윤 양생한 공시체의 강도는 수침시키지 않은 공시체보다 시멘트비에 관계없이 평균 10% 정도 저하되었으나, 대기중 양생한 공시체는 시멘트비가 낮은 경우 최대 30% 정도까지 크게 저하되었다. 본 연구 결과는 현장에서 발생하는 수분공급 조건과 수침에 따른 시멘트 혼합토의 강도 변화를 예측하여 시멘트 혼합토를 사용한 댐과 같은 지반구조물의 안정성 확보에 기여할 수 있다.

패각 잔골재를 활용한 3D 프린팅 자원순환 콘크리트의 역학적 성능 평가 (Mechanical Properties Evaluation of 3D Printing Recycled Concrete utilizing Wasted Shell Aggregate)

  • 서지우;박주현;한동석
    • 한국전산구조공학회논문집
    • /
    • 제37권1호
    • /
    • pp.33-40
    • /
    • 2024
  • 해양폐기물 중 하나인 패각의 발생량은 매년 증가하고 있으나, 대부분이 해안 근처에 야적되거나 방치되어 환경적·사회적으로 문제가 되고 있다. 천연 골재 부존량 감소에 따른 골재 대체재로서 패각이 사용된다면 재료 수송에 따른 물류비용을 효과적으로 감축시킬 수 있어 자원 재활용을 활성화할 수 있다. 본 연구에서는 3D 콘크리트 프린팅 기술을 활용한 해양 구조물의 건설 재료로서 패각 잔골재의 사용 가능성을 분석하였다. 패각을 활용한 3D 프린팅 콘크리트는 패각 잔골재와 시멘트 풀 계면 등의 공극 요인으로 일반 콘크리트 대비 낮은 강도를 가지기 때문에 역학적 성능 평가를 위한 미세구조 특성 분석이 요구된다. 유동성, 출력성 및 적층성을 고려하여 3D 프린팅 콘크리트의 배합을 선정하였으며, 패각 잔골재를 활용한 3D 프린팅 콘크리트 시편의 물성과 미세구조를 분석하였다. 시편의 물성을 평가하기 위해 3D 프린터로 압축강도와 부착강도 시편을 제작하였고 강도 시험을 진행하였다. 미세구조를 분석하기 위해 고해상도 이미지를 얻을 수 있는 SEM 촬영을 수행하였으며, 히스토그램 기반 상 분리 방법을 적용하여 공극을 분리하였다. 패각 잔골재 종류에 따른 공극률을 확인하고 확률함수를 활용하여 공극 분포 특성을 정량화하였으며, 패각 잔골재의 종류에 따른 시편의 역학적 물성과 미세구조 특성 간의 상관관계를 확인하였다.

초고강도(130MPa) 콘크리트의 현장적용성 평가에 관한 실험 (Field Applicability Evaluation Experiment for Ultra-high Strength (130MPa) Concrete)

  • 조춘환
    • 한국재난정보학회 논문집
    • /
    • 제20권1호
    • /
    • pp.20-31
    • /
    • 2024
  • 연구목적: 고강도 콘크리트 연구개발은 건축물의 고층화를 가능케 하고, 단면 축소로 구조물 자중이 경감되어 보와 슬래브 두께를 얇게 함으로 보다 많은 층수를 축조할 수 있었으며, 넓은 유효공간이 확보되고, 기초 저면 지정에 사용된 자재 및 철근과 콘크리트 양을 절감하는 효과를 가져올 수 있다. 연구방법: 현장시공 및 품질측면에서는 낮은 물결합재비 배합를 연구하므로 건조수축 발생 저감 효과를 확인할 수 있고, 콘크리트 표면의 블리딩 최소화 연구를 통하여 그 효과를 검증할 수 있다. 연구결과:고성능감수제 사용에 의한 유동성 증진으로 자체 충전성이 높아 현장 시공 용이성을 확인하고, 콘크리트의 조기 강도 발현으로 거푸집 탈형 시간을 단축시킬 수 있는 장점을 확인하였다. 이러한 실험결과 자료는 초고층 건축물에서는 설계기준강도 100MPa급 이상의 초고강도콘크리트의 현장 적용이 확대될 수 있다. 본 연구를 통하여 국내에서도 120층 이상의 초고층 건축물 현장 적용성이 고려된 130MPa급 이상의 초고강도 콘크리트를 현장에서 실제 적용 가능성 여부를 실험, 평가하였다. 결론:본 연구에서는 초고강도의 현장적용 가능성을 확인하기 위하여 여러 가지 방법의 실내기초 실험으로 연구되어진 최적의 배합비를 찾아서 모의부재 예비 실험 후 실물크기와 유사한 모의부재에 130MPa 초고강도콘크리트를 레미콘 공장에서 생산하여 현장 펌프 압송 타설하고, 콘크리트의 유동성 및 강도 발현과 수화열에 관하여 현장 적용성을 실험한 연구다.

Oxide perovskite crystals type ABCO4:application and growth

  • Pajaczkowska, A.
    • 한국결정성장학회:학술대회논문집
    • /
    • 한국결정성장학회 1996년도 The 9th KACG Technical Annual Meeting and the 3rd Korea-Japan EMGS (Electronic Materials Growth Symposium)
    • /
    • pp.258-292
    • /
    • 1996
  • In the last year great interest appears to YBCO thin films preparation on different substrate materials. Preparation of epitaxial film is a very difficult problem. There are many requirements to substrate materials that must be fullfilled. Main problems are lattice mismatch (misfit) and similarity of structure. From paper [1] or follows that difference in interatomic distances and angles of substrate and film is mire important problem than similarity of structure. In this work we present interatomic distances and angle relations between substrate materials belonging to ABCO4 group (where A-Sr or Ca, B-rare earth element, C-Al or Ga) of different orientations and YBCO thin films. There are many materials used as substrates for HTsC thin films. ABCO4 group of compounds is characterized by small dielectric constants (it is necessary for microwave applications of HTsC films), absence of twins and small misfit [2]. There most interesting compounds CaNdAlO4, SrLaAlO4 and SrLaGaO4 were investigated. All these compounds are of pseudo-perovskite structure with space group 14/mmm. This structure is very similar to structure of YBCO. SLG substrate has the lowest misfit (0.3%) and dielectric constant. For preparation of then films of substrates of this group of compound plane of <100> orientation are mainly used. Good quality films of <001> orientations are obtained [3]. In this case not only a-a misfit play role, but c-3b misfit is very important too. Sometimes, for preparation of thin films substrates of <001> and <110> orientations were manufactured [3]. Different misfits for different YBCO faces have been analyzed. It has been found that the mismatching factor for (100) face is very similar to that for (001) face so there is possibility of preparation of thin films on both orientations. SrLaAlO4(SLA) and SrLaGaO4(SLG) crystals of general formula ABCO4 have been grown by the Czochralski method. The quality of SLA and SLG crystals strongly depends on axial gradient of temperature and growth and rotation rates. High quality crystals were obtained at axial gradient of temperature near crystal-melt interface lower than 50℃/cm, growth rate 1-3 mm/h and the rotation rate changing from 10-20pm[4]. Strong anisotropy in morphology of SLA and SLG single crystals grown by the Czochralski method is clearly visible. On the basics of our considerations for ABCO4 type of the tetragonal crystals there can appear {001}, {101}, and {110} faces for ionic type model [5]. Morphology of these crystals depend on ionic-covalent character of bonding and crystal growth parameters. Point defects are observed in crystals and they are reflected in color changes (colorless, yellow, green). Point defects are detected in directions perpendicular to oxide planes and are connected with instability of oxygen position in lattice. To investigate facets formations crystals were doped with Cr3+, Er3+, Pr3+, Ba2+. Chromium greater size ion which is substituted for Al3+ clearly induces faceting. There appear easy {110} faces and SLA crystals crack even then the amount of Cr is below 0.3at.% SLG single crystals are not so sensitive to the content of chromium ions. It was also found that if {110} face appears at the beginning of growth process the crystal changes its color on the plane {110} but it happens only on the shoulder part. The projection of {110} face has a great amount of oxygen positions which can be easy defected. Pure and doped SLA and SLG crystals measured by EPR in the<110> direction show more intensive lines than in other directions which allows to suggest that the amount of oxygen defects on the {110} plane is higher. In order to find the origin of colors and their relation with the crystal stability, a set of SLA and SLG crystals were investigated using optical spectroscopy. The colored samples exhibit an absorption band stretching from the UV absorption edge of the crystal, from about 240 nm to about 550 m. In the case of colorless sample, the absorption spectrum consists of a relatively weak band in the UV region. The spectral position and intensities of absorption bands of SLA are typical for imperfection similar to color centers which may be created in most of oxide crystals by UV and X-radiation. It is pointed out that crystal growth process of polycomponent oxide crystals by Czochralski method depends on the preparation of melt and its stoichiometry, orientation of seed, gradient of temperature at crystal-melt interface, parameters of growth (rotation and pulling rate) and control of red-ox atmosphere during seeding and growth (rotation and pulling rate) and control of red-ox atmosphere during seeding and growth. Growth parameters have an influence on the morphology of crystal-melt interface, type and concentration of defects.

  • PDF

신생아 중환자실에 입원한 환아 어머니의 스트레스 (A Study on the Perceived Stress of Mothers in Neonatal Intensive Care Unit)

  • 최성희
    • Child Health Nursing Research
    • /
    • 제4권1호
    • /
    • pp.60-75
    • /
    • 1998
  • The parents have much expectation upon the pregnancy and child birth, and in most cases, they expect the healthy parturient child. However, we can be placed on the high-risk conditions which have the physical, social and immature infant, due to the unexpected results, among the new-born. Accordingly, these high-risk newborn and premature infants will be mostly in NICU, which the concentrated medical treatment can be given, upon their conditions. After their birth and during these periods, they will be divided from the parents, and the nurse will accomplish the bringing-up activities which they can take care of the infant, expected by the parents after their birth. The hospitalization of high-risk newborn including these premature infants is the shocking experience to the parents of family, and thus they can feel the fear and uneasiness, and these reactions of parents are troubled in the behavior at the usual days, and cause the disorder and spiritless status, and these results break the supporting ability of parents, and cause the obstruction. Also, the unavoidable division between the parents and the children as like hospitalization of children can make the parents to feel the alienation emotionally, and this causes the results which the pride on the bringing-up ability of baby gets to be lost. These problems can cause the difficulties on the bonding or the parenting in the further days, and can be related to the neglect and abuse of children. Also, it is gradually increased to study and report which the emotional division by the physical division between the mother and the baby obstructs the normal affection course between the parent and the infant. The stress caused by the birth and the hospitalization of high-risk newborn, as like this, is important in the points which it can uncertainly affect the potential energy for the relationship of parent-child who are finally healthy. Accordingly, the significance and purpose of this study are to understand the contents and degree of stress which the parents of high-risk newborn including the immature child can be experienced from the hospitalization of ICU for their new borns, and thus to offer the basic program to the nursing intervention program for these. The subject of this study is the mother of newborn in NICU of 10 General Hospitals located at the 3one of Pusan, Korea from September 1997 to October 1997, and thus makes the subject of 95 person of parents who agreed to take part in the study and it is descriptive study related to the stress of mother having the newborn in NICU. The method is based on the preceding study related to the stress of mother having the experience of child hospitalization and chronic disease child, and then acquires the advice of specialists group as like 5 nursing professors, and then is amended and supplemented. Total number of questions is 43 items and consists of 5 factors as like medical treatment &nursing procedures, disease status & prognosis, role of parents, communication & inter-personal relationships, hospital environment, and is 5 point Likert Scale. The reliability of this study method is very highly shown to be Cronbach α=0.95. The collected data is analysed as Average, Frequency, Standard Deviation, T-test, ANOVA, Pearson Correlation Coefficient, Duncan multifulrange test by use of SPSS /PC (V7.5). The results of this study is summarized as under. 1. Every characteristics of subject is which the party of mother is 28.70age(±7.48) in the average ages, 51% in the high-school graduate, 38.5% in the christianity, total monthly income is 212.55 thousand won(±1.971), 74.5% in the housewife, 72.9% in the parents and children together living and the number of children to be 1.48person(± 0.6) in average, the recognition on the prognosis of baby is 74.0% in 'Don't know', the relationship with the husband after the hospitalization of babyis 37.3% in 'More Intimate', the relationship with the family of husband to be 48% in 'No-change', and the degree which is consulted with the husband about the baby is 55% in 'very frequently' and the visiting number per week is 4.59(±1.63) in average and the accompanying person in the time of visiting is which the number of husband is 56.3% and thus is the highest. The characteristics of baby is which the age is 21.88days(±16.47) after the birth in average, the sex to be 50 person in the female 52.1% and the order of birth to be 54.2% in the first chid, and the weight in the birth to be 2770gm(±610) and the height in the birth to be 46.26cm(±7.62) in aver age. The medical diagnosis is 37.5% in the premature infant, the career of hospitalization is 96.9% in 'None', and the operation plan is 90.6% in 'None' and the execution of operation is 88% in 'None' and the nursing of incubator is 55.2% in 'Yes', and the method of feeding is 50.5% in 'Oral' and the contents of feeding is 46.9% in the 'Milk'. 2. The total stress degree of subject is almost highly shown to be as 3.36(±0.86). If it is compared upon each cause, 'stress on disease status & prognosis' is highest 3.79(±1.28), and it is in the order of 'stress on medical treatment & nursing procedures' 3.70(±0.93), 'stress on hospital environment' 3.14(±0.86), 'stress on role of parents' 3.18(±0.92) and 'stress on communication & inter personal relationship' 2.62(± 0.77) 3. As the results of checking the notworthiness of stress degree upon each variable of subject, the variable showing the noted difference was the birth weight(γ=-0.16, P=0.04), birth height(γ=-0.23, P=0.03), nursing in the incubator(F=8.93, P=0.04), feed method(F=2.94, P=0.04). That is to say, it is shown which the smaller the birth weight is, the higher the stress degree of mother is noteworthily. Also, the smaller the birth height baby is, the higher the stress of mother is. In the incubator, it os shown which the mother whose baby is nursing in the incubator is higher in the stress degree than other mothers. Upon the feeding method of baby, that is to say, TPNis the highest, and it is shown in the order of NPO, Tube feeding, and P.O. feeding. When we review the above-mentioned results, as the status is serious, it is thought which we include the supporting nursing for coping with the stress of parents in the setting-up od nursing plan for the baby in the NICU.

  • PDF

설측 슬롯을 부여한 임플란트 고정성 보철물에서 내면 간격이 유지력에 미치는 영향 (Effect of internal gap on retentivity in implant fixed prosthesis with lingual slot)

  • 김태균;이규복
    • 대한치과보철학회지
    • /
    • 제56권3호
    • /
    • pp.206-211
    • /
    • 2018
  • 목적: 최근 임플란트 고정성 보철물 제작 시 나사 유지형 보철물의 교합적, 심미적 단점을 해결하고, 시멘트 유지형 보철물에서 착탈 용이성을 확보하기 위하여 보철물 설측에 슬롯을 형성하는 방법이 소개되었다. 이 연구의 목적은 설측 슬롯을 부여한 시멘트 유지형 임플란트 보철물 제작 시에 내면 간격이 보철의 제거에 어떤 영향을 미치는지 알아보는 것이다. 재료 및 방법: 티타늄 지대주와 상부에 합착할 지르코니아 보철물 내면 간격을 30, 35, $50{\mu}m$의 3종류로 설정하여 종류별로 3개씩 총 15개를 제작하였다. 지르코니아 보철물은 티타늄 지대주의 선반 부위와 만나는 위치에서 1 mm의 공간이 생기도록 하여 탈착을 위한 슬롯(retrievable cement-type slot, RCS)을 형성하였다. 지대주와 지르코니아 보철물의 합착에는 자가 중합 레진 시멘트를 이용하였고, 합착 된 시편을 맞춤 제작된 장비를 이용하여 최대 제거 응력 값을 Ncm단위로 측정하였다. 통계적 분석으로 세 그룹을 비교하기 위해 Kruskal-Wallis 검정을 시행하였고 (${\alpha}=.05$), 사후검정으로 수정된 Mann-Whitney U-test와 Bonferroni correction 방법을 이용하여 차이를 보았다 (${\alpha}=.017$). 결과: 내면 간격이 $30{\mu}m$ 군과 $35{\mu}m$ 군간의 비교에 있어서 제거 응력에 통계학적으로 유의한 차이가 없었고 (P = .032), $30{\mu}m$군과 $50{\mu}m$군, $35{\mu}m$군과 $50{\mu}m$군간을 비교 할 때 유의한 차이가 나타났다 (P < .017). 결론: 그러므로 내면 간격은 지르코니아 보철물과 티타늄 지대주 사이의 유지력에 영향을 미쳤다.

PREPARATION OF AMORPHOUS CARBON NITRIDE FILMS AND DLC FILMS BY SHIELDED ARC ION PLATING AND THEIR TRIBOLOGICAL PROPERTIES

  • Takai, Osamu
    • 한국표면공학회:학술대회논문집
    • /
    • 한국표면공학회 2000년도 추계학술발표회 초록집
    • /
    • pp.3-4
    • /
    • 2000
  • Many researchers are interested in the synthesis and characterization of carbon nitride and diamond-like carbon (DLq because they show excellent mechanical properties such as low friction and high wear resistance and excellent electrical properties such as controllable electical resistivity and good field electron emission. We have deposited amorphous carbon nitride (a-C:N) thin films and DLC thin films by shielded arc ion plating (SAIP) and evaluated the structural and tribological properties. The application of appropriate negative bias on substrates is effective to increase the film hardness and wear resistance. This paper reports on the deposition and tribological OLC films in relation to the substrate bias voltage (Vs). films are compared with those of the OLC films. A high purity sintered graphite target was mounted on a cathode as a carbon source. Nitrogen or argon was introduced into a deposition chamber through each mass flow controller. After the initiation of an arc plasma at 60 A and 1 Pa, the target surface was heated and evaporated by the plasma. Carbon atoms and clusters evaporated from the target were ionized partially and reacted with activated nitrogen species, and a carbon nitride film was deposited onto a Si (100) substrate when we used nitrogen as a reactant gas. The surface of the growing film also reacted with activated nitrogen species. Carbon macropartic1es (0.1 -100 maicro-m) evaporated from the target at the same time were not ionized and did not react fully with nitrogen species. These macroparticles interfered with the formation of the carbon nitride film. Therefore we set a shielding plate made of stainless steel between the target and the substrate to trap the macropartic1es. This shielding method is very effective to prepare smooth a-CN films. We, therefore, call this method "shielded arc ion plating (SAIP)". For the deposition of DLC films we used argon instead of nitrogen. Films of about 150 nm in thickness were deposited onto Si substrates. Their structures, chemical compositions and chemical bonding states were analyzed by using X-ray diffraction, Raman spectroscopy, X-ray photoelectron spectroscopy and infrared spectroscopy. Hardness of the films was measured with a nanointender interfaced with an atomic force microscope (AFM). A Berkovich-type diamond tip whose radius was less than 100 nm was used for the measurement. A force-displacement curve of each film was measured at a peak load force of 250 maicro-N. Load, hold and unload times for each indentation were 2.5, 0 and 2.5 s, respectively. Hardness of each film was determined from five force-displacement curves. Wear resistance of the films was analyzed as follows. First, each film surface was scanned with the diamond tip at a constant load force of 20 maicro-N. The tip scanning was repeated 30 times in a 1 urn-square region with 512 lines at a scanning rate of 2 um/ s. After this tip-scanning, the film surface was observed in the AFM mode at a constant force of 5 maicro-N with the same Berkovich-type tip. The hardness of a-CN films was less dependent on Vs. The hardness of the film deposited at Vs=O V in a nitrogen plasma was about 10 GPa and almost similar to that of Si. It slightly increased to 12 - 15 GPa when a bias voltage of -100 - -500 V was applied to the substrate with showing its maximum at Vs=-300 V. The film deposited at Vs=O V was least wear resistant which was consistent with its lowest hardness. The biased films became more wear resistant. Particularly the film deposited at Vs=-300 V showed remarkable wear resistance. Its wear depth was too shallow to be measured with AFM. On the other hand, the DLC film, deposited at Vs=-l00 V in an argon plasma, whose hardness was 35 GPa was obviously worn under the same wear test conditions. The a-C:N films show higher wear resistance than DLC films and are useful for wear resistant coatings on various mechanical and electronic parts.nic parts.

  • PDF

복합레진의 exponential 중합법이 상아질접착제의 미세인장접착강도에 미치는 영향 (EFFECT OF THE EXPONENTIAL CURING OF COMPOSITE RESIN ON THE MICROTENSILE DENTIN BOND STRENGTH OF ADHESIVES)

  • 성소래;서덕규;이인복;손호현;조병훈
    • Restorative Dentistry and Endodontics
    • /
    • 제35권2호
    • /
    • pp.125-133
    • /
    • 2010
  • 접착제를 통해 치아에 접착되는 상부의 복합레진의 빠른 중합은 접착제층에 높은 중합수축응력을 발생시킨다. 중합수축응력을 경감시키기 위해서, LED 광중합기의 하나인 Elipar FreeLight 2 (3M ESPE, USA)에서는 최초 5초 이내에 광강도를 증가시키는 exponential 중합법을 채택하고 있다. 본 연구에서는 짧은 시간내에 광강도를 증가시키는 exponential 중합법이 복합레진의 초기 중합수축속도를 효과적으로 조절할 수 있는지를 알아보기 위해 접착제 적용 후 상부의 복합레진을 exponential 중합법과 continuous 중합법으로 중합하여 상아질접착제의 미세인장접착강도를 비교하였다. 3M사의 Scotchbond Multipurpose Plus (MP), Single Bond 2 (SB), 및 Adper Prompt (AP)의 세 종류의 접착제를 발치한 대구치의 교합면 상아질에 제조사의 지시에 따라 적용하고, 혼합형 복합레진인 Denfil (Vericom, Korea)을 두 가지광중합방법으로 중합하였다. 접착 후 48시간에 미세인장접착강도를 측정하고, 파절면은 FE-SEM.으로 관찰하였다. 그 결과, 각각의 접착제에서 중합방법에 따른 접착강도의 차이는 관찰할 수 없었다(Two-way ANOVA, p > 0.05). MP와 SB의 미세인장접착강도는 AP에 비해 유의하게 높았다(p < 0.05). 대부분의 파절시편에서는 혼합형 파절이 가장 많이 관찰되었으나, 중합방법에 따른 파절양상의 차이는 없었다. 결론적으로 5초 이내의 짧은 시간에 광강도를 증가시키는 exponential 중합법은 continuous 중합법과 비교하여 상아질접착제의 미세인장접착강도에 영향을 주지 않았다.