• 폴리머
• /
• 제35권1호
• /
• pp.72-76
• /
• 2011

폴리(비닐 알코올)(PVA)의 수분 팽윤성 조절을 위하여 천연 색소 기교제로 PVA를 가교한 후, 이들의 물성을 화학 가교된 PVA와 함께 비교하였다. 천연 가교제로 사용된 안토시아닌 그리고 크로신에 함유된 하이드록시기는 NaCl 촉매 하에서 PVA의 하이드록시기와 수소 결합하여 PVA를 물리적으로 가교시킴을 알 수 있었다. 화학 가교제인 Polycup 172에 의하여 가교된 PVA와 비교하여 수분 팽윤성이 현저히 감소하며 또한 가교에 의한 결정화도가 감소함을 확인하였다. 천연 가교제로 가교된 PVA는 화학 가교된 PVA에 비하여 상대적으로 열안정성이 떨어지나 함유된 다당류에도 불구하고 순수 PVA보다는 높은 열안정성을 가짐을 알 수 있었다.

• Restorative Dentistry and Endodontics
• /
• 제26권5호
• /
• pp.399-408
• /
• 2001

Tooth bleaching has been prevailing recently for its ability to recover the color and shape of natural teeth without reduction of tooth material. However, it has been reported that bleaching procedure adversely affects the adhesive bond strength of composite resin to tooth. At the same time the bond strength was reported to be regained by application of some chemical agents. The purpose of this in vitro study was to investigate the effect of the removal of residual peroxide on the composite- enamel adhesion and also evaluated fracture mode between resin and enamel after bleaching. Sixty extracted human anterior and premolars teeth were divided into 5 groups and bleached by combined technique using of office bleaching with 35 % hydrogen peroxide and matrix bleaching with 10% carbamide peroxide for 4 weeks. After bleaching, the labial surfaces of each tooth were treated with catalase, 70% ethyl alcohol, distilled water and filled with composite resin. Shear bond strength was tested and the fractured surfaces were also examined with SEM. Analysis revealed significantly higher bond strength values. (p＜0.05) for catalase-treated specimens, but water-treated specimens showed reduction of bond strength, alcohol- treated specimens had medium value between the two groups(p＜0.05). The fracture mode was shown that the catalase group and the alcohol group had cohesive failure but the water sprayed group had adhesive failure. It was concluded that the peroxide residues in tooth after bleaching seems to be removed by gradual diffusion and the free radical oxygen from peroxide prevents polymerization by combining catalyst in the resin monomer. Therefore it may be possible to eliminate the adverse effect on the adhesion of composite resin to enamel after bleaching by using water displacement solution or dentin bonding agent including it for effective removal of residual peroxide.

• 대한치과보철학회지
• /
• 제39권5호
• /
• pp.502-513
• /
• 2001

The purpose of this study was to evaluate the effect of dentin pretreatment with Dentin Conditioner, Ultra-Etch, conditioner of Fuji Plus cement on the shear bond strength of resin-reinforced glass ionomer cements to dentin and analyze the fractured surfaces. To evaluate the bond strength, the extracted human teeth which had uniform area of exposed dentin were cemented with conventional glass ionomer cement, 3M $RelyX^{TM}$ Luting (Vitremer luting cement), Fuji Plus cement after dentin pretreatment. The shear bond strength was measured using the Universal testing machine (Instron Co., USA) with a crosshead speed of 1mm/m. The effect of dentin pretreatment was evaluated by observing pretreated dentin surfaces under the scanning electron microscope, measuring the shear bond strength and observing the fractured surfaces under the scanning electron microscope. The results were as follows : On the SEM observation of surface morphology, the specimens treated with Dentin Conditioner. Ultra-Etch and conditioner of Fuji Plus cement were removed the smear layer and funneled dentinal tubules in dentin surfaces. In $RelyX^{TM}$ Luting cement group, shear bond strength of pretreated group was significantly higher than control group. In Fuji Plus cement group and Fuji I group, regardless of the type of pretreatment agents, there was tendency of increase in the shear bond strength. On the SEM observation of fractured surfaces, as the shear bond strength increase, it were shown thicker cement layers and were not shown dentinal tubules According to these results. it were shown that dentin pretreatment have much effect on bonding states.

• Restorative Dentistry and Endodontics
• /
• 제28권5호
• /
• pp.392-401
• /
• 2003

The purpose of this study was to evaluate the penetration pattern of dentin adhesives according to the orientation of dentinal tubules with confocal laser scanning microscopy. Specimens having perpendicular. parallel and oblique surface to dentinal tubules were fabricated. The primer of dentin adhesives (ALL $BOND^{\circledR}{\;}2,{\;}CLEARFIL^{TM}$ SE BOND and PQ1) was mixed with fluorescent material. rhodamine B isothio-cyanate (Aldrich Cherm. CO., Milw., USA), It was applied to the specimens according to the instructions of manufactures. The specimens were covered with composite resin (Estelite, shade A2) and then cut to a thickness of 500$\mu\textrm{m}$ with low speed saw (Isomet^{TM}, Buehler. USA). The adhesive pattern of dentin adhesives were observed by fluorescence image using confocal laser scanning microscopy. The results were as follows. 1. For the groups with tubules perpendicular to bonded surface. funnel shape of resin tag was observed in all specimen. However. resin tags were more prominent in phosphoric acid etching system (ALL $BOND^{\circledR}$ 2 and PQ1) than self etching system ($CLEARFIL^{TM}$ SE BOND). 2. For the groups with tubules parallel to bonded surface. rhodamine-labeled primer penetrated into peritubular dentin parallel to the orientation of dentinal tubules. But rhodamine-labeled primer of PQ1 diffused more radially into surrounding intertubular dentin than other dentin adhesive systems. 3. For the groups with tubules oblique to bonded surface. resin tags appeared irregular and discontinuous. But they penetrated deeper into dentinal tubules than other groups.

• Restorative Dentistry and Endodontics
• /
• 제29권3호
• /
• pp.219-225
• /
• 2004

This study evaluated the microshear bond strength of composte resin to teeth bleached with commercial whitening strips and compared with those bleached with home bleaching gel. Twelve extracted human central incisors were cut into pieces and central four segments were chosen from each tooth and embedded in acrylic resin. Four blocks with 12 tooth segments embedded in acrylic resin were acquired and numbered from group one to group four. Group 1 was bleached with Crest Whitestrips, group 2 with Claren, group 3 with Opalescence tooth whitening gel (10％ carbamide peroxide). Group 4 was used as control. The bleaching procedure was conducted for 14 days according to the manufacturer's instructions ; the bleaching strips twice a day for 30 min and the bleaching gel once a day for 2hr. After bleaching, composite resin (Filtek Supreme) was bonded to the enamel surfaces with a self-etching adhesive (Adper Prompt L-Pop) using Tygon tube. Microshear bond strength was tested with a universal testing machine (EZ-test). The data were statistically analysed by one-way ANOVA. The study resulted in no statistical differences in microshear bond strength between the tooth segments bleached with 2 different whitening strips and bleaching gel. It can be concluded that the effect of bleaching with either commercial whitening strips or bleaching gel on enamel is minimal in bonding with self-etching adhesive to composite resin.

• Restorative Dentistry and Endodontics
• /
• 제25권1호
• /
• pp.41-45
• /
• 2000

The purpose of this study was to evaluate the microleakage of compomers. In this in vitro study, class V cavities were prepared on buccal and lingual surfaces of thirty extracted human premolars and molars on cementum cervical margin. The experimental teeth were randomly divided into five groups of six samples (12 surfaces) each, Group 1 : Dyract AP, Group 2 : F2000 compomer(non-etch), Group 3 : F2000 compomer(etch), Group 4 : Elan, Group 5 : Compoglass. The bonding agents and compomer were applied for each group following the manufacturer's instructions. After 500 thermocycling between $5^{\circ}C$ and $55^{\circ}C$, the 30 teeth were placed 1% methylene blue dye for 24 hours then rinsed with tab water. The specimens were embedded in clear resin, then sectioned buccolingually through the center of the restoration with a low speed diamond saw. The dye penetration on each of the specimen was observed with a stereomicroscope. The results of study were statistically analyzed using the Student-Newmann-Kaul' s Test. The results were obtained as follows. 1. All compomer restoration systems did not completely prevent marginal leakage. 2. In enamel margin, F2000 compomer(etch) group showed lower leakage value than other systems. Elan and Compoglass groups showed lower leakage value than Dyract AP and F2000 compomer(non-etch) groups (p<0.05). 3. In cementum margin, F2000 compomer(etch) and F2000 compomer (non-etch) groups showed lower leakage value than other systems. Dyract AP and Elan groups showed lower leakage value than Compoglass group (p<0.05).

• 영어영문학
• /
• 제58권1호
• /
• pp.43-67
• /
• 2012

My essay aims at illustrating Whitman's homosexual vision of utopia with a close reading of his representative homosexual text, Calamus. His expansive self is based upon his intimate contact with the world and is almost always drawn to a wider vision of community in which different individuals share the locus of commonness and reach beyond their empirical boundaries. While foregrounding the contingent and the singular, Whitman forges bonds with other people through a series of ecstatic moments that carry us into the public sphere and common interests. Contrary to the current Whitman studies, his homosexual text doesn't repress contingency in order to celebrate the universal, but fully develops the commensurability among diverse historical agents. Whitman knows well the social taboos and inhibitions at the time of national crisis and expansion, but keeps imagining the world where homosexuality plays a central and significant role in founding a democratic solidarity and achieving a desirable social structure. His ideal of America is not a deferred wish for the future, but a concrete vision that can be achieved here and now, realized by the spontaneous bonding and instant attraction among free men. Instead of interpreting history or suggesting practical alternatives, he keeps questioning the dominant ideologies and the given orders of social control, and suggests a free and open relationship among men where no exterior power or mediating other intervenes. His utopian vision is radical as well as ideal, in that it rejects the interventions of the power structure and its institutions and courageously inscribes his homosexuality in the process of writing about and reading his contemporary America. As a predecessor of a homosexual utopian vision of America, Whitman has inspired many later poets, showing a possibility of infusing a homosexual identity into a radical imaging of the nation and its future.

• 한국산업융합학회 논문집
• /
• 제26권6_3호
• /
• pp.1297-1303
• /
• 2023

Research on enhancing the mechanical strength, lightweight properties, electrical conductivity, and thermal conductivity of composite materials by incorporating nano-materials is actively underway. Thermoplastic resins can change their form under heat, making them highly processable and recyclable. In this study, Polyamide-Nylon 6 (PA6), a thermoplastic resin, was utilized, and as reinforcing agents, fused carbon nano-materials (FCN) formed by structurally combining Carbon Nanotube(CNT) and Graphene were employed. Nano-materials often face challenges related to cohesion and dispersion. To address this issue, Silane functional groups were introduced to enhance the dispersion of FCN in PA6. The manufacturing conditions for the composite materials involved determining the use of a dispersant and varying FCN content at 0.05 wt%, 0.1 wt%, and 0.2 wt%. Tensile strength measurements were conducted, and FE-SEM analysis was performed on fracture surfaces. As a result of the tensile strength test, it was confirmed that compared to pure PA6, the strength of the polymer composite with a content of 0.05 wt% was improved by about 60%, for 0.1 wt%, about 65%, and for 0.2 wt%, the strength was improved by 50%. Also, when compared according to the content of FCN, the best strength value was shown when 0.1 wt% was added. The elastic modulus also showed an improvement of about 15% in the case of surface treatment compared to the case without surface treatment, and an improvement of about 70% compared to pure PA6. Through FE-SEM, it was confirmed that the matrix material and silane-modified nanomaterial improved the dispersibility and bonding strength of the interface, helping to support the load evenly and enabling effective stress transfer.

• 한국건축시공학회지
• /
• 제24권1호
• /
• pp.23-34
• /
• 2024

본 연구의 목적은 RC 구조물의 균열 보수용 폴리머 시멘트 복합체의 휨접착성능을 평가하기 위함이다. 시멘트 모르타르에 다양한 크기의 균열을 만들어 PCCs를 충전한 후, 소정의 양생을 거쳐 휨접착강도와 휨강도 개선 정도를 파악하였다. 연구결과, 균열보수용 PCCs의 휨접착강도는 시멘트의 종류, 폴리머 종류 및 폴리머 결합재비에 따라 영향을 받으며 실리카퓸을 혼입한 초조강시멘트를 사용한 경우가 보통시멘트를 사용한 경우에 비해 최대 19.0%의 휨접착강도 개선효과가 나타났다. PCCs로 충전된 시멘트 모르타르의 휨강도 개선 정도는 균열폭의 영향보다는 균열깊이에 따라 큰 차이를 보였으며 균열에 충전된 PCCs가 단순히 보수재료로서 기능뿐만 아니라 어느 정도 휨강도를 개선시키는 보강재료로서도 역할을 하였다. 본 연구결과, 초조강시멘트, 3종류의 폴리머 디스퍼전과 실리카퓸, 60%~80%의 높은 폴리머 결합재비로 제작한 PCCs가 균열을 충전하는 보수재료로서 현장에서 충분히 사용될 수 있을 것이다.

• 한국산림과학회지
• /
• 제77권3호
• /
• pp.294-302
• /
• 1988

본(本) 실험(實驗)은 낙엽송(落葉松)(Larix leptolepsis) 수피(樹皮)로부터 추출(抽出)한 수피추출물(樹皮抽出物)의 특성(特性)을 조사(調査)하고 그들 추출물(抽出物)의 접착제화(接着劑化)의 가능성(可能性)을 평가(評價)하기 위해 실행되었다. 수율(收率)과 반응도(反應度)의 측정(測定)을 통해 온도(溫度) 및 시간(時間)의 영향(影響)과 탄산화(炭酸化) 및 설폰화(化)의 효과(效果)를 조사하였다. 목재접착제(木材接着劑)로의 적용(適用) 가능성(可能性)을 구명하기 위해서는 33% 농도(濃度)에서 점도(粘度)와 겔화시간(化時間)을 측정(測定)하였다. 그 결과(結果)는 다음과 같다. 1. 수율(收率)과 반응도(反應度)가 모두 높은 $80^{\circ}C$에서 120분(分)의 추출(抽出)이 적정온도(適正溫度) 및 시간(時問)이었다. 2. 탄산화(炭酸化)는 1% $Na_2CO_3$에서 설폰화(化)는 1% $Na_2SO_3$ : $NaHSO_3$와 0.25% $Na_2SO_3$에서 가장 큰 효과(效果)를 얻었으며 이들중 0.25% $Na_2SO_3$에 의한 설폰화(化)가 수율(收率)과 반응도(反應度)를 가장 크게 증가시켰다. 3. 온수추출액(溫水抽出液)의 수율(收率)은 17.2%이며 1% NaOH와 5% NaOH 추출액(抽出液)의 수율(收率)은 각각(各各) 38.6%와 44.6%이었다. 4. 온수추출액(溫水抽出液)의 반응도(反應度)는 68.8%로 가장 높았으며 1% NaOH와 5% NaOH 추출액(抽出液)의반응도(反應度)는 각각(各各) 49.3%와 25.8%이었다. 5. 각(各) 추출액(抽出液)은 33% 농도(濃度)에서 점도변화(粘度變化)가 매우 심했다. 특히 1% NaOH 추출액(抽出液)은 점도(粘度)가 매우 높았으며 5% NaOH 추출액(抽出液)은 오히려 점도(粘度)가 낮았다. 6. 추출액(抽出液)의 겔화시간(化時間)은 pH 7-10에서 가장 낮은 값을 나타냈으며 pH 4에서 가장 높은 값을 나타냈다. 파라포름알데히드의 이용(利用)은 37% 포름알데히드보다 겔화시간(化時間)을 더 연장시켜 주었다. 7. 온수추출(溫水抽出)의 설폰화(化)와 1% NaOH 추출(抽出)의 설폰화(化)를 제외(除外)한 다른 추출방법(抽出方法)은 높은 점도(粘度)(1% NaOH 추출(抽出))와 비경화성(比硬化性)(5% NaOH 추출(抽出), 5% NaOH 추출(抽出)의 설폰화(化)) 때문에 부적합한 것으로 밝혀졌다. 8. 접착제로(接着劑)로의 이용(利用)이 적합한 것으로 나타난 추출액(抽出液) 중 온수추출(溫水抽出)과 온수추출(溫水抽出)의 설폰화(化)는 반응도(反應度)가 뛰어난 반면 1% NaOH 추출(抽出)의 설폰화(化)는 비율면(比率面)에서 유리(有利)한 것으로 나타났다.