• Architectural research
• /
• v.13 no.4
• /
• pp.43-51
• /
• 2011

Community-based housing is widely recognized as one unique mode of affordable housing provision discussed in the agenda of urban housing policy in the midst of global economy. While economic development of rural communities are severely blocked by many factors, the local housing needs at grass roots level are addressed in the response to the growing number of the elderly and shortage of adequate housing to accommodate the group, and the availability of affordable housing is primarily seen as a viable option to the sustainability of rural community. This research study is to examine the case study of community-based housing development in rural areas, and to explore the drives and hurdles that influence the success of each development. The on-site visits and in-depth interviews with community leaders were employed to meet the research goals. The findings show that the driving factors making the successful housing development include the firm commitment to the importance of affordable and adequate housing, strong leadership of community leaders, public support, well-advised dispersion of public resources and strong bond between the public sector and local people. In spite of all the contributing factors, the unfamiliarity of collective ownership is the leading hurdle to proceed the development in a timely manner.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.10 no.4
• /
• pp.475-482
• /
• 1998

In this paper, an experimental study was conducted to investigate the performance of the spherical ice particle production system which uses the technology of water spray in a vacuum chamber for increasing the heat transfer area. As a result, following conclusions were obtained. The diffusion-controlled evaporation model agreed relatively well with experiments. The spray flow rate influences the performance of the system rather than any other factors, for example, the spray nozzle position, the nozzle number. As the spray rate increases, the system efficiency increases. It is due to the entrainment of small droplets among the spray with the exhausted vapor. Thus the system should be designed and operated to prevent the entrainment. Assuming the compressor efficiency to be 70%, the COP of the system reaches highly up to 6 at a maximum spray rate. Under the conditions, however, the rigid ice layer is obtained because ice particles bond together with increase of the spray rate. Therefore, the spray rate should be controlled properly to make the spherical ice particles.

• Food Science and Preservation
• /
• v.6 no.1
• /
• pp.121-135
• /
• 1999

Effective synthetic antioxidants such as butylated hydroxyanisole(BHA) and butylated hydroxytoluene(BHT) have been widely used in the food industry, but they are suspected to be toxic and carcinogenic effects. Therefore, the development of safely available natural antioxidants such as ascorbic acid, ${\alpha}$-tocopherol, ${\beta}$-carotene, flavonoids and selenium is essential. In particular, flavonoids, 2-phenyl-benzo-${\alpha}$-pyrones, are polyphenolic compounds that occur ubiquitously in food of plant origin. flavonoids occur in foods generally as O-glycosides with sugars bound usually at the C\ulcorner position. And variations in their heterocyclic ring gibes rise to flavones, flavonols, flavanones, flavanols, catechins, anthocyanidins, chalcone and isoflavones. Vegetables, fruits, and beverages are the main dietary sources of the flavonols, primarily as quercetin, kaempferol, and myricetin and the corresponding flavones, apigenin and luteolin. These flavonoids have biological activity such as antioxidant, anti-inflammatory, antithrombotic, antimutagenic, anticarcimogenic antiallergic and antimicrobial activity effects in vitro and in vivo. Flavonoids posses strong antioxidant activities acting as oxygen radicals scavenger, metal chelators and enzyme inhibitor. The antioxidant activity of flavonoids is determined by their molecular structure and more specially, by the position and degree of hydroxylation of the ring structure. All flavonoids with the 3`, 4`-dihydroxy(ortho-dihydroxy) posses marked antioxidant activity. And antioxidant activity increases with the number of hydroxyl groups substituted on the A-and B-rings. There is as yet no certainty about the effect of the presence of a double bond between C\ulcorner and C\ulcorner on the antioxidant activity of flavonoids.

• International Journal of Concrete Structures and Materials
• /
• v.7 no.1
• /
• pp.79-93
• /
• 2013

One of the biggest problems affecting bridges is the transverse cracking and deterioration of concrete bridge decks. The causes of early age cracking are primarily attributed to plastic shrinkage, temperature effects, autogenous shrinkage, and drying shrinkage. The cracks can be influenced by material characteristics, casting sequence, formwork, climate conditions, geometry, and time dependent factors. The cracking of bridge decks not only creates unsightly aesthetic condition but also greatly reduces durability. It leads to a loss of functionality, loss of stiffness, and ultimately loss of structural safety. This investigation consists of field, laboratory, and analytical phases. The experimental and field testing investigate the early age transverse cracking of bridge decks and evaluate the use of sealant materials. The research identifies suitable materials, for crack sealing, with an ability to span cracks of various widths and to achieve performance criteria such as penetration depth, bond strength, and elongation. This paper also analytically examines the effect of a wide range of parameters on the development of cracking such as the number of spans, the span length, girder spacing, deck thickness, concrete compressive strength, dead load, hydration, temperature, shrinkage, and creep. The importance of each parameter is identified and then evaluated. Also, the AASHTO Standard Specification limits liveload deflections to L/800 for ordinary bridges and L/1000 for bridges in urban areas that are subject to pedestrian use. The deflection is found to be an important parameter to affect cracking. A set of recommendations to limit the transverse deck cracks in bridge decks is also presented.

• Korean Journal of Materials Research
• /
• v.18 no.9
• /
• pp.503-506
• /
• 2008

The effect of silver nanoparticles (NPs) incorporation on the electronic properties of poly (3, 4-ethylenedioxythiphene) : poly(styrenesulfonate) (PEDOT : PSS) films was investigated. The surface of silver NPs was stabilized with trisodium citrate to control the size of silver NPs and prevent their aggregation. We obtained ca. 5 nm sized silver NPs and dispersed NPs in PEDOT : PSS solution. Sheet resistance, surface morphology, bonding state, and work function values of the PEDOT : PSS films were modified by silver NPs incorporation as well as annealing temperature. Sodium in silver NPs solution could lead to a decrease of work function of PEDOT : PSS; however, large content of silver NPs have an effect on the increase in work function, resulting from charge localization on the silver NPs and a decrease in the number of charge-trapping-related defects by chemical bond formation.

• The Korean Journal of Food And Nutrition
• /
• v.11 no.1
• /
• pp.26-30
• /
• 1998

It was determined the effect of deodorizing temperature on forming amount and its composition of trans fatty acids by GLC in corn oil. Trans fatty acids were detected a trace amount at the low temperature deodorizing as 240~25$0^{\circ}C$, but it s amounts were showed to 0.30, 0.57, 0.64 and 0.81% at the high temperature deodorizing as 255~27$0^{\circ}C$, respectively. The isomerization phenomenon was remarkably in order that double bond number might to increase, tt, and ttt type were not detected nearly, that the ct, tc, cct and tcc type were detected to the large amount, respectively.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2004.11a
• /
• pp.274-275
• /
• 2004

The majority of dyes belong to the chromophoric class known as donor-acceptor systems, the essential structural feature of such systems being the presence of one or more electron donating groups conjugated to one or more electron withdrawing groups via an unsaturated bridge. The indigo molecule may be formally divided into two identical electron donor/acceptor subsystems, each containing an add number of pi electrons, two subsystems being joined by carbon-carbon double bond. Indigoid type dyes which show a strong colour change on protonation or dissociation have many potential functional applications, for example as analytical pH indicators, solvent polarity indicators, and in various imaging and reprographic systems.

• KIEAE Journal
• /
• v.5 no.1
• /
• pp.19-25
• /
• 2005

Rapid urbanization and social development have brought about changes in family structure. In urbanized areas, recently the number of dogs that are a majority of companion animals has increased significantly in Korea. Consequently, a lot of friction between the general public who are not fond of dogs and dog owners in public places such as parks has been happening. A lot of countries that are taking a lead role in animal welfare have built dog parks that the general public and dogs can enjoy together. This research starts with the realization that the concept of 'dog park' needs to be introduced in Korea as more and more Koreans own dogs and other pets. This research aims to provide guidance for dog park planning by drawing planning items and analyzing the needs of each item. Total 56 planning items including dog zone, dog playground, and dog training facility, are drawn in this research. There are differences in the needs according to sex, age and the amount of time they spent with their dogs, however overall there is the highest needs in separated area for dogs in parks.

• Journal of the Korean Ceramic Society
• /
• v.18 no.2
• /
• pp.99-104
• /
• 1981

Glass-ceramics possessed a number of characteristics which suggested their suggested their use for sealing to metals. The choice of particular glass-ceramics compositions for this application is governed by various factors, including workability of the glasses, thermal expansion characteristics and the matching of these to appropriate metals. Other properties, such as mechanical strength, determined the performance of glass-ceramics to metal seals. The purpose of the present study was to investigate direct sealing behaviour of copper to $Li_2O-ZnO-SiO_2$ system glass-ceramics. The design of the seal was a concentric seal which might contribute to the strong bond formation by providing compressive stress during thermal excursions. Tensile strengths of sealing layers were measured by Instron test machine. The layers were examined by electron probe microanalyzer. Crsystallization rate was increased with the amount of ZnO or $Li_2O$, and ZnO increased the sealing strength, but $Li_2O$ lowered it. Sealing mechanism was due to the formation of metal oxides, which acted as binder between copper and glass-ceramics. The nickle-plated copper seal with 10% $Li_2O$ and 30% ZnO was the most strong seal, and its sealing strength was more than 56kg/$\textrm{cm}^2$.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.107-108
• /
• 2008

We calculated orthorhombic-NiSi (010)/Si superstructure. Orthorhombic-NiSi was changed to tetragonal structure to be matched with Si substrate. Eight models were produced by the type of Si substrate. In the case of orthorhombic-NiSi (010)/Si (020)[00-1], it was the most favorable energetically and the shortest of the distance between two superstructures. However, in the case of orthorhombic-NiSi (010)/Si (010)[00-1], it was the most unfavorable energetically and the longest of the distance. The energy and distance of orthorhombic-NiSi (010)/Si superstructure were changed by the coordination number of Ni atom and the bond length of atom-atom at the interface.