• 한국산학기술학회논문지
• /
• 제13권4호
• /
• pp.1453-1459
• /
• 2012

본 연구에서는 보이스코일 모터와 압전 구동기를 동일 축으로 배치함으로써 초정밀 위치결정뿐만 아니라 동특성을 개선할 수 있도록 하는 듀얼 스테이지를 다룬다. 듀얼 스테이지는 모델링이 엉성할 경우 오히려 나쁜 동특성을 보이는 단점이 있다. 이 논문은 본드그래프를 이용하여 듀얼 스테이지를 모델링하고 동적 상태방정식을 본드그래프에서 유도하였다. 또한 동특성을 향상시키기 위한 보상기의 설계 예시를 보이고 있으며, 시뮬레이션을 통해 검증하였다.

• Journal of Applied Biological Chemistry
• /
• 제43권1호
• /
• pp.37-43
• /
• 2000

1,3,2-Dioxaphosphorinanes are suitable compounds for studying the stereochemistry of substitution at phosphorus. Cis- and trans-5-hydroxymethl-5-methyl-2-thiono-2ethoxy-1,3,2-dioxaphosphorinane were prepared, and their structures and stereochemistry unambiguously assigned by NMR and X-ray crystallography with acetoxy and 3,5-dinitrobenzoyloxy derivatives, respectively. Trans isomer gave $^{31}P$ NMR signal at higher field than cis isomer, and the ring proton Spectrum of cis isomer showed characteristic pattern for identifying its geometry. In X-ray crystallography they adopted a chair conformation with the ethoxy groups in the axial positions, and the sulfide groups in the equatorial positions. A flattening of the ring around the phosphorus center was noted, the POC bond angles were about $120^{\circ}$, and the C-O bonds in the ring were significantly longer than the C-O bond for the ethoxy group or the C-O bond for hydroxyl group.

• 한국도로학회논문집
• /
• 제17권6호
• /
• pp.47-54
• /
• 2015

PURPOSES : The objective of this study is to evaluate the early adhesive characteristic of asphalt emulsions, including polymer-modified emulsions, for chip seals using the surface energy concept, the bitumen bond strength (BBS) test, and the Vialit test. METHODS : Two general methods, the BBS test and Vialit test, were applied to investigate the bond strength and the aggregate loss, respectively. A new theory, the surface free energy (SFE) theory, was used to evaluate the adhesive characteristic between the emulsion and the aggregate. Based on the theory, the contact angles were measured, and then the surface energy components were calculated. Using those components, the work of adhesion (Wa) was calculated for each emulsion. To ensure reliable results, all the tests were performed under the same conditions, i.e., at $25^{\circ}C$ for 240 minutes of curing time. For the materials, three emulsions (CRS-2, CRS-2L, and CRS-2P) and one aggregate type (granite) were employed. RESULTS AND CONCLUSIONS : Under the same conditions, the modified emulsions showed better adhesive characteristics and curing behaviors than the unmodified emulsions. In addition, there was no significant difference between the various modified emulsions. One of the important findings is that the analysis by Wa presents more sensitive results than other methods. The results of the Wa showed that the CRS-2P emulsion has the best adhesive characteristics. Consequently, the use of modified emulsions for chip seals could prevent aggregate loss and allow open traffic earlier.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 춘계학술대회 논문집
• /
• pp.191-192
• /
• 2008

• Computers and Concrete
• /
• 제12권5호
• /
• pp.585-612
• /
• 2013

The paper presents quasi-static numerical simulations of the behaviour of short reinforced concrete beams without shear reinforcement under mixed shear-tension failure using the FEM and four various constitutive continuum models for concrete. First, an isotropic elasto-plastic model with a Drucker-Prager criterion defined in compression and with a Rankine criterion defined in tension was used. Next, an anisotropic smeared crack and isotropic damage model were applied. Finally, an elasto-plastic-damage model was used. To ensure mesh-independent FE results, to describe strain localization in concrete and to capture a deterministic size effect, all models were enhanced in a softening regime by a characteristic length of micro-structure by means of a non-local theory. Bond-slip between concrete and reinforcement was considered. The numerical results were directly compared with the corresponding laboratory tests performed by Walraven and Lehwalter (1994). The advantages and disadvantages of enhanced models to model the reinforced concrete behaviour were outlined.

• 동력기계공학회지
• /
• 제14권3호
• /
• pp.77-82
• /
• 2010

In general, the control valves are essential components in hydraulic systems. Structural changes within the valves remain a challenge because many parameters of valve tend to interact in terms of static and dynamic performance. Therefore, the valve characteristics is applied directly to the stability of hydraulic system. Inner structure of the valve which is used mainly in the industries is made up poppet type and spool type. This paper made a description of the method for numerical analysis and modeling of the valve with a built-in moving part of four-type. Based on the physical parameters of the valves, a numerical model of objected valve is developed using the bond graph method. It is to verified the results that the moving part of four-type has an effect on pressure and flow characteristics. Also, It is analyzed the results which has an effect on response characteristic by angular of poppet valve face and inertia variation of the valve with a built-in moving part. In the results, it is confirmed that the rising and settling time vary with the shape of moving part in valve.

• 패션비즈니스
• /
• 제19권5호
• /
• pp.157-174
• /
• 2015

This research intends to observe the effects of social capital regarding fashion social enterprises on the community sense of participating consumers, and verify the relationship of the effects that such social capital and community sense have on sustainability formation variable(shared values, suitability of values, behavioral flow, cognitive belief and long-term relationship orientation) of social enterprises. For such analysis, a sample of 400 consumers with experience of purchasing products of fashion social enterprises more than once was utilized, and path analysis was conducted utilizing AMOS 20.0. As a result of this research, first, information sharing, social participation among the characteristic factors of social enterprises' social capital had a meaningful impact on shared values, and self-pursuit and significance meaningfully affected the suitability of values. Second, mutual influence, sense of belonging, satisfaction of needs and emotional bond among the characteristic factors of community sense between social enterprises and consumers meaningfully affected shared values, whereas mutual influence, sense of belonging and emotional bond substantially influenced suitability of values. Third, shared values and suitability of values affected the relationship between behavioral flow and cognitive trust, and behavioral flow and cognitive trust both had meaningful impact on long-term relationship orientation.

• 한국자동차공학회논문집
• /
• 제2권6호
• /
• pp.38-49
• /
• 1994

In this study, grindability of some representative engineering ceramics are experimentally investigated using resin bond diamond wheel with conventional surface grinding machine, and proper grinding conditions which can be obtained from various experimental results are established also for mechanical components which are proper to domestic circumstances with high reliability. And through the results of experiment, it is confirmed that grinding energies of the ceramics, especially in the case of $Al_2O_3$, are lower than steel with same machining condition in the conventional grinding because of their fine-brittle fracture mode type removal process, though the ceramics are well-known to unmachinable materials. And moreover, the total pass numbers needed for spark-out process to be completed are depend on their mechanical properties because that grinding stiffness is different from each other. The grinding force, ginding power and ground surface roughness are also measured and compared. Furthermore, the experiments carried out in this study, some useful results are obtained with can guide to grind engineering ceramics with conventional surface grinding machine.

• 콘크리트학회논문집
• /
• 제23권5호
• /
• pp.675-682
• /
• 2011

최근 콘크리트 구조물의 보강시 사용되는 FRP(fiber reinforced polymer)를 이용한 보강에서, 철근콘크리트의 피복부분에 홈을 형성하고 이 홈내부에 FRP 바를 삽입한 후 에폭시 모르타르 등으로 보강하는 방법, 즉 표면매입보강(near-surface-mounted retrofit, NSMR)방법의 연구가 최근 활발히 진행되고 있다. 이 연구는 FRP 판을 철근콘크리트 표면에 매입보강시 FRP 판의 부착 특성을 실험적으로 연구한 논문이다. FRP 판의 매입 길이, 전단키의 유무, 보강열수 등을 변수로 부착 실험을 실시하여 파괴 기구를 관찰하고 이를 근거로 콘크리트 할렬 파괴시의 인발강도를 산정할 수 있는 강도식을 제안하였다. 실험 결과 매입 길이가 길수록 인발 내력은 증가하며 FRP 판의 열수가 증가할수록 내력이 증진되는 것으로 나타났다. 콘크리트의 할렬 파괴를 고려하여 내력을 산정한 결과 실험 결과와 좋은 대응을 보이는 것으로 나타났다.

• 대한토목학회논문집
• /
• 제26권4A호
• /
• pp.775-785
• /
• 2006

본 논문은 우수한 부착성능과 더불어 단순한 공정으로 생산이 가능한 GFRP 보강근의 표면성형 기법을 제시하였다. 논문에는 제안하고자하는 표면성형기법에 대한 내용과 개발된 보강근의 콘크리트 부착성능에 대하여 언급하였다. 본 논문에서 제안하는 표면성형공법은 에폭시레진에 초단섬유인 milled glass fibers를 혼입하여 GFRP 보강근의 외부에 프레스 성형하는 공법이다. milled fibers의 적적한 혼합비를 결정하기 위하여 다양한 혼입비로 제작된 경화된 에폭시 시편의 압축강도실험과 다양한 혼입비의 표면형상을 갖는 부착시험편의 pull-out 실험이 수행되었다. 실험결과, 정적하중하에서 뿐 아니라 환경하중 재하상태에서도 milled fibers의 혼입량이 증가할수록 콘크리트와의 부착성능이 증진됨을 확인됨으로써 본 공법의 효용성을 검증하였다.