KSCE Journal of Civil and Environmental Engineering Research (대한토목학회논문집)

Korean Society of Civil Engeneers (대한토목학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on Methodology for Improvement of Bond of FRP reinforcement to Concrete

초단유리섬유(milled glass fibers)와 에폭시 혼합물을 이용한 FRP 보강근 표면성형기법 연구

  • 문도영 ;
  • 심종성 (한양대학교 공학대학 토목.환경공학과) ;
  • 오홍섭 (진주산업대학교 이공대학 토목공학과)
  • Received : 2005.12.23
  • Accepted : 2006.06.01
  • Published : 2006.07.31
Download PDF
⟨ Previous Next ⟩

Abstract

This study focused on the development of surface deformations of GFRP rebars with a better bond characteristic for reinforcing concrete, and simultaneously, of GFRP rebars with more simple and economic production process. This research paper describes a development and bond performance of GFRP rebar with molded deformations, which is composed of polymer resin and milled glass fiber. To determine proper mix ration of milled fibers, material test of hardened epoxy and pullout tests of GFRP rebar with various mix ratio were conducted. The test results indicate that the new strategy of using a mixture of epoxy resin and milled fiber could be successfully applied to a surface structure of GFRP rebar to enhance bond with concrete. The bearing resistance of the ribs was further enhanced by the milled fibers at mechanical and environmental loading state.

본 논문은 우수한 부착성능과 더불어 단순한 공정으로 생산이 가능한 GFRP 보강근의 표면성형 기법을 제시하였다. 논문에는 제안하고자하는 표면성형기법에 대한 내용과 개발된 보강근의 콘크리트 부착성능에 대하여 언급하였다. 본 논문에서 제안하는 표면성형공법은 에폭시레진에 초단섬유인 milled glass fibers를 혼입하여 GFRP 보강근의 외부에 프레스 성형하는 공법이다. milled fibers의 적적한 혼합비를 결정하기 위하여 다양한 혼입비로 제작된 경화된 에폭시 시편의 압축강도실험과 다양한 혼입비의 표면형상을 갖는 부착시험편의 pull-out 실험이 수행되었다. 실험결과, 정적하중하에서 뿐 아니라 환경하중 재하상태에서도 milled fibers의 혼입량이 증가할수록 콘크리트와의 부착성능이 증진됨을 확인됨으로써 본 공법의 효용성을 검증하였다.

Keywords

References

  1. 박찬기, 원종필, 유정길(2003) 화학적 환경에 노출된 콘크리트 보강용 FRP 보강근의 장기효과, 한국콘크리트학회 논문집, 한국콘크리트학회, 제15권 제6호, pp. 811-819
  2. 심종성, 문도영, 주민관(2003) 고강도 폴리머 모르타르 및 탄소섬유 봉(Rod)로 보강된 교량 바닥판의 보강성능, 한국콘크리트학회 논문집, 한국콘크리트학회, 제16권 제2호, pp. 213-220
  3. ACI 440 Committee (2004) Guide Test Methods for Fiber-Reinforced Polymers (FRPs) for Reinforcing and Strengthening Concrete Structures, ACI, Farmington Hills, Michigan, USA
  4. Al-Zahrani, M.M., Al-Dulaijan, S.U., Nanni, A., Bakis, C.E. and Boothby, T.E. (1999) Evaluation of bond using FRP rods with axisymmetric deformations, Construction and Building Materials, Vol. 13, pp. 299-309 https://doi.org/10.1016/S0950-0618(99)00038-0
  5. Bank, L.C., Puterman, M. and Katz, A. (1998) The effect of material degradation un bund properties of fiber reinforced plastic reinforcing bars in concrete, ACI Materials Journal, ACI, Vol. 95, No. 3, pp. 232-243
  6. Benmokrane, B., Zhang, B. and Chennouf, A. (2000) Tensile properties and pullout behaviour of AFRP and CFRP rods for grouted anchor applications, Construction and Building Materials, Vol. 14, pp. 157-170 https://doi.org/10.1016/S0950-0618(00)00017-9
  7. Chaallal, O. and Benmokrane, B. (1995) Fiber-reinforced plastic rebars for concrete applications, Composite Part B: Engineering, Vol. 27B, pp. 245-252
  8. Clark, A.P. (1946) Comparative bond efficiency of deformed concrete reinforcing bars, ACI Journal, Proceedings Vol. 43, No. 4, pp. 381-400
  9. Cosenza, E., Manfredi, G. and Realfonzo, R. (1997) Behavior and modeling of bond of frp rebars to concrete, Journal of Composites for Construction, ASCE, Vol. 1, No. 2, pp. 40-51 https://doi.org/10.1061/(ASCE)1090-0268(1997)1:2(40)
  10. Cosenza, E., Manfredi, G. and Realfonzo, R. (2002) Development length of FRP straight rebars, Composites Part B: Engineering, Vol. 33, Issue 7, pp. 493-504 https://doi.org/10.1016/S1359-8368(02)00051-3
  11. Darwin, D. and Graham, E. K. (1993) Effect of deformation height and spacing on bond strength of reinforcing bars, ACI Structural Journal, ACI, Vol. 90, No. 6, pp. 646-657
  12. Deitz, D., Harik, I.E., and Gesund, H. (2000) GFRP Reinforced Concrete Bridge Decks. Report KTC-00-9, Kentucky Transportation Center College of Engineering, Lexington, Kentucky
  13. Faza, S. and Gangarao, H (1990) Bending and bond behavior of concrete beams reinforced with plastic rebars, TRANSPROTATION RESEARCH RECORD 1290, TRB, pp. 185-193
  14. Hamidah, H.M., Gowripalan, N. and Fadhil, N.M. (2001) Absorption of aramid prestressing rods in aggressive solutions, Journal of Composites for Construction, ASCE, Vol. 5, No. 4, pp. 254-257 https://doi.org/10.1061/(ASCE)1090-0268(2001)5:4(254)
  15. John, D., John, T.H., and Clayton, A.M. (1988) Fiber-Reinforced Epoxy Composites, Epoxy resins - Chemistry and Technology, Claytion, A.M., Marcel Dekker, Inc., New York, USA., pp. 885-928
  16. Kadoiglu, F. and Pidaparti, R. (2005) Composite rebars shape effect in reinforced structures, Composite Structures, Vol. 67, Issue 1, pp. 19-26 https://doi.org/10.1016/j.compstruct.2004.01.006
  17. Katz, A. and Berman, N. (2000) Modeling the effect of high temperature on the bond of FRP reinforcing bars to concrete, Cement & concrete composites, Vol. 22, pp. 433-443 https://doi.org/10.1016/S0958-9465(00)00043-3
  18. Larralde, J. and Silva-Rodriguez, R. (1992) Bond and slip of FRP rebars in concrete, Journal of Materials in Civil Engineering, Vol. 5, No. 1, pp. 30-40 https://doi.org/10.1061/(ASCE)0899-1561(1993)5:1(30)
  19. Moloney, A.C., Kausch, H.H. and Stieger, H.R. (1983) The fracture of particulate-filled epoxide resins, Journal of Materials Science, Vol. 18, No. 1, pp. 208-216 https://doi.org/10.1007/BF00543827
  20. Litherland, K.L., Oakley, D.R. and Proctor, B.A. (1983) The use of accelerated ageing procedures to predict the long term strength of grc composites. Cement and Concrete Research, Vol. 11, pp. 455-466 https://doi.org/10.1016/0008-8846(81)90117-4
  21. Rehm, G. (1961) Uber die grunlagen des verbundes zwischen stahlund beton, deutscher ausschuss fur stahlbeton, No. 1381, pp. 59
  22. Rossetti, V.A., Galeota, D., and Giammatteo, M. (1995) Local bond stress-slip relationships of glass fibre reinforced plastic bar embedded in concrete, Materials and Structure, Vol. 28, pp. 340-344 https://doi.org/10.1007/BF02473149
  23. Somboonsong, W., Ko, F.K., and Harris, H.G. (1998) Ductile hybrid fiber reinforced plastic reinforcing bar for concrete structures : design methodology, ACI Material journal, ACI, Vol. 95, No. 6, pp. 655-666
  24. Soong, W.H. (2001) Bonding between the Concrete and Fiber Reinforced Plastic (FRP) Rods, M. Sc. dissertation, The Univ. of Manitoba, Canada
  25. Spanoudakis, J. and Young, R.J. (1984) Crack propagation in a glass particle-filled epoxy resin, Journal of Materials Science, Vol. 19, No. 2, pp. 487-496 https://doi.org/10.1007/BF02403235
  26. Tannous, F.E. and Saadatmanesh, H. (1998) Environmental effects on the mechanical properties of e-glass FRP rebars, ACI Materials Journal, ACI, Vol. 95, No. 2, pp. 87-100
  27. Tepfers, R. and Lorenzis, L. (2003) Bond of FRp reinforcement in concrete - a challenge, Mechanics of composite Materials, Vol. 39, No. 4, pp. 315-328 https://doi.org/10.1023/A:1025642411103
  28. Tighiouart, B., Benmokrane, B. and Gao, D. (1998) Investigation of bond in concrete member with fibre reinforced polymer(FRP) bars, Construction and Building Materials, Vol. 12, pp. 453-462 https://doi.org/10.1016/S0950-0618(98)00027-0
  29. Treece, R. and Jirsa, J. (1989) Bond strength of epoxy-coated reinforcing bars, ACI Material Journal, ACI, Vol. 86, No. 2, pp. 167-174