• 한국대기환경학회지
• /
• 제16권4호
• /
• pp.339-350
• /
• 2000

The three-dimensional new corrdinate system over a single hill double hills and complex terrain with a single hill and a rectangular obstacle was generated using a body-fitted coordinate system. Control of the coordinate line distribution in the field was executed by generalizing the elliptic generating system to Poisson equation. ▽2ξ=P. The new coordinate system was well fitted to the surface boundary of single hill and double hills. But in the case of complex terrain with hill and rectangular obstacle there was smoothing tendency around the rectangular obstacle. In order to show the validity of the body-fitted coordinate system the heat diffusion equation was transformed and the temperature distribution was calculated over the various terrain. The results showed the temperature distribution was very symmetrical and stable around hills and obstacle. As a result the couple of a body-fitted coordinate system and the heat diffusion equation were executed successfully. Wind field over complex terrain with hill and rectangular obstacle which represent urban area was simulated stably in body-fitted coordinate system. The qualitative result show the enhancement of wind speed at the upwind direction of a hill and a rectangular obstacle and the recirculation zone at the downwind direction.

• 복식
• /
• 제54권3호
• /
• pp.43-51
• /
• 2004

The purpose of this study was to compare ideal clothing and actual clothing behavior between Korean and Japanese college students. 185 Korean students and 91 Japanese students were used into data analysis from October to December. 2000. The age range was 18 to 28 years. The results were as followed. 1) Japanese students wanted to wear fitted clothing styles with revealing the body, while Koreans wanted to wear not only fitted styles but also relaxed and coved body styles. 2) Korean students wore more loose styles and fitted upper styles and pants than Japanese students. On the other hand, Japanese students wore fitted clothing styles and skirt. 3) Japanese students showed higher correlation between ideal clothing styles and actual clothing styles than Koreans. This means that although Koreans want to wear ideal styles, they don't wear those styles much. 4) Overweight students tended to avoid wearing fitted and revealed body styles, pursuing more loose and coved body styles. This tendency showed stronger to Koreans than Japanese students.

• 한국의류학회지
• /
• 제33권7호
• /
• pp.1109-1120
• /
• 2009

This study develops a fitted torso type basic pattern for men by utilizing 3D body scan data. Recent fashion trends are reflected in the development of the pattern. The subjects were 15 men in their 20's, who wear size 95 (M size). Body scan data was obtained through a 3D whole body scanner (WB4, Cyberware, USA), and a body surface development figure for developing male fitted torso type basic pattern was attained through the use of Rapid Form 2006 as well as Auto CAD 2006 programs. The results are as follows: A body surface development figure through body surface segment method showed high exactitude in an error range of 100$\pm$1%. In addition, it occurred in an error range of 100:1:3% because of the hard scanning conditions in the incline of the shoulder and armpit areas. However, the body surface development figure as well as the direct measurement results can be used as basic data for the given patternmaking since the error range falls into 100$\pm$3%. Dart amounts obtained from the average cross section were center back 2.2cm (24.3%), back armpit point 3.8cm (41.8%), front armpit point 3.0cm (33.9%). As shown the jacket pattern, the biggest dart amount was portioned out at the back armpit point. The drafting equations for the development pattern acquired are as follows; Full width=C/2+5cm, back length=height/4-1cm, armhole depth=(C/10+12cm)+3cm, back width=2C/10+2cm, front width=2C/10. The development pattern was a fitted torso basic pattern that was composed of 3 pieces, so it would be very useful in developing shirt or jacket patterns. According to the results of the evaluation of the developed pattern appearance, it obtained higher scores of over 3.5 points in almost items, meaning that the developed pattern is appropriate for a male fitted torso type basic pattern. It suggests a possibility of patternmaking from a body surface development figure in 2-D to prototype.

• 대한기계학회논문집
• /
• 제14권1호
• /
• pp.189-196
• /
• 1990

본 연구에서는 THOMPSON의 방법과는 달리 경계에서 부여된 metric scale fac- tor에 의해서 동적으로 제어되는 제어함수법과 경계에서 Neumann조건을 적용하여, 제 어함수와 비직교성의 문제를 해결하는 새로운 방법을 소개하고, 3차원 단연결영역(si- mply-conneted region)의 실제적이고 관심있는 영역, 즉, 축대칭 물체(axisymmetric body), 익형 물체(wing body), 확대 곡관(diffusing curved duct), 90도 곡관(90 deg. elbow turn)에 대하여 격자생성을 하였다.

• 대한기계학회논문집B
• /
• 제20권3호
• /
• pp.1015-1027
• /
• 1996

In this paper, a numerical procedure for the calculation of the incompressible Navier-Stokes equations in a generalized nonorthogonal body fitted coordinate system is proposed and is validated through three test problems. Present numerical procedure derives the pressure equation by using the pressure substitution method on the regular grid system, and discretized momentum equations are based on the covariant velocity components. Cavity flow, backward facing step flow, and two dimensional channel flow with a sinusoidal wavy wall are chosen as three test problems. Numerical solutions obtained by present procedure shows a good agreement with previous numerical and/or experimental results. Convergence rate is also satisfactory.

• 한국의류학회지
• /
• 제47권1호
• /
• pp.17-34
• /
• 2023

This study aimed to develop a fitted torso pattern with an improved fit for inverted-triangular males in their twenties. For this study, six torso patterns were collected, compared and evaluated, and a fitted torso pattern was developed using virtual fittings. The research results are as follows. First, the fitted torso pattern received a good rating as a result of the virtual fitting evaluation: waist dart set 2 of the front; the amount of comfort is set at 5 cm around the chest, 4 cm around the waist and 10 cm around the hips. Second, the evaluation of virtual fitting of the development pattern showed that fit evaluation was 4.11/5 points, ease evaluation was 6.53/7 points, and that the stress map and airgap were suitable for the human body. Third, the actual fit evaluation of the development pattern was 4.25/5 points, 6.35/7 points for ease evaluation, and 4.81/5 points for motion evaluation. Fourth, there was no significant difference between the results of the virtual and actual fitting evaluation with the objectivity test. It is therefore possible to apply a pattern developed through a virtual fitting to an actual human body and to confirm the objectivity of the pattern.

• 한국의류산업학회지
• /
• 제18권2호
• /
• pp.235-243
• /
• 2016

This study is a preliminary study to suggest a distinguished fitted sloper according to body types. To this end, this study classified body types of men in their 20s in an attempt to examine the characteristics of each type. A total of 842 adult men of age 20 to 29 were studied by using the direct measurement data taken in the 6th Size Korea. The subjects' body types were classified based on 48 measurements. We extracted a total of six factors that characterized the body types of adult men in their 20s: horizontal size, vertical length, shoulder development, trunk area length, hip area length and shoulder slope. Result of the cluster analysis, the body shapes of men in their 20s were classified into four types. We developed the overlapped silhouettes for each of the four body types and compared the front and side shapes to clearly identify the differences of each body types. The findings of this study indicated that Korean adult men in their 20s can be classified into the big inverted triangular type that represents healthy and muscular men, the small inverted triangular type that represents short and skinny men, the triangular type that represents men with abdominal obesity, and the rectangular type that represents men that are fat overall, with a fairly even distribution of each body type.

• 한국의류학회지
• /
• 제31권2호
• /
• pp.247-257
• /
• 2007

The purpose of this study was to develop men's garment sizing system, based on the anthropometric measurements called 'SizeKorea', which was surveyed between 2003 and 2004. The number of the survey subjects was 3,215 of males, who were from 18 to 69 years old. In the results, body types were assorted by drops, consisting of 4 upper body types and 2 lower body types. Height, chest, waist and hip were selected as the key dimensions of sizing system and the intervals of them were decided on statistical analysis of key dimensions, size intervals of ready-to wear clothes and sizing systems of other countries. In the results, older group or shorter height group had less differences between chest and waist as well as between waist and hip, but younger group and taller group had more differences. The size intervals for fitted jacket and coat were 3cm in chest and waist, while the intervals for fitted pants were 2cm in waist and hip. The intervals for not-fitted clothes were 5cm in chest, waist and hip, which 5 cm interval of height were applied, in all cases.

• 복식문화연구
• /
• 제30권6호
• /
• pp.828-841
• /
• 2022

This study aims to develop a fitted torso pattern suitable for males in their forties and fifties who are obese-a group that accounts for more than fifty percent of men in this age group-using a 3D virtual fitting program. Size Korea's 2022 data for obese males in their forties and fifties is utilized for this study. In terms of the research method, a 3D program (CLO 3D) is used to implement the target group's various body types and to apply fitted torsos that enable verification and evaluation of the pattern's fit and ease. The characteristics of fitted torso patterns for obese bodies are as follows: the front centerline is a profile line; shoulder darts are added by reflecting waist-abdominal protrusion in the front panel; and shoulder, arm, waist, and center-back darts are constructed for the back panel. For obese bodies, the minimum circumference ease amounts should be approximately 6-7cm for the chest, 6cm for the waist, and 6-7cm for the hips. Based on an evaluation of the virtual fit of the developed fitted torso pattern, the data shows that a pattern (foundation) such as this is well suited for obese body types with an average of 4.67/5 points for reverse triangular obesity, an average of 6.67/7 points for log obesity, and an average of 6.69 points for the ease amount.

• Asian-Australasian Journal of Animal Sciences
• /
• 제21권9호
• /
• pp.1227-1232
• /
• 2008

Carcass characteristics data of Hanwoo (N = 1,084) were collected from two stations of the National Livestock Institute of Animal Science (NIAS), Korea and records from thirteen individual cow-calf operators were analyzed to estimate variance and covariance components and the effect of different slaughter endpoints. Carcass traits analyzed were cold carcass weight (CWT, kg), REA (rib eye area, cm2), back fat thickness (mm) and marbling score (1-7). Four different models were examined. All models included sex and contemporary group as fixed effects and the animal's direct genetic potential and environment as random effects. The first model fitted a linear covariate of age at slaughter. The second model fitted both linear and quadratic covariates of age at slaughter. The third model fitted a linear covariate of body weight at slaughter. The fourth model fitted both linear covariates of age at slaughter and body weight at slaughter. Variance components were estimated using the REML procedure with Gibb's sampler. Heritability estimate of CWT was in the range of 0.08-0.11 depending on the model applied. Heritability estimates of BF, REA and MS were in the ranges of 0.23-0.28, 0.19-0.26, and 0.44-0.45, respectively. Genetic correlations between CWT and BF, between CWT and REA, and between CWT and MS were in the ranges of -0.33 - -0.14, 0.73-0.84, and -0.01- 0.11, respectively. Genetic correlations between REA and BF, between MS and BF and between REA and MS were in the ranges of -0.82 ~ -0.72, 0.04~0.28 and -0.08 ~ -0.02, respectively. Variance and covariance components estimated varied by model with different slaughter endpoints. Body weight endpoint was more effective for direct selection in favor of yield traits and body weight endpoints affected more of the correlated response to selection for the traits of yield and quality of edible portion of beef.