• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.45 no.2
• /
• pp.97-107
• /
• 2019

Objectives: Small animal maxillofacial models, such as non-segmental critical size defects (CSDs) in the rabbit mandible, need to be standardized for use as preclinical models of bone regeneration to mimic clinical conditions such as maxillofacial trauma. The objective of this study is the establishment of a mechanically competent CSD model in the rabbit mandible to allow standardized evaluation of bone regeneration therapies. Materials and Methods: Three sizes of bony defect were generated in the mandibular body of rabbit hemi-mandibles: $12mm{\times}5mm$, $12mm{\times}8mm$, and $15mm{\times}10mm$. The hemi-mandibles were tested to failure in 3-point flexure. The $12mm{\times}5mm$ defect was then chosen for the defect size created in the mandibles of 26 rabbits with or without cautery of the defect margins and bone regeneration was assessed after 6 and 12 weeks. Regenerated bone density and volume were evaluated using radiography, micro-computed tomography, and histology. Results: Flexural strength of the $12mm{\times}5mm$ defect was similar to its contralateral; whereas the $12mm{\times}8mm$ and $15mm{\times}10mm$ groups carried significantly less load than their respective contralaterals (P<0.05). This demonstrated that the $12mm{\times}5mm$ defect did not significantly compromise mandibular mechanical integrity. Significantly less (P<0.05) bone was regenerated at 6 weeks in cauterized defect margins compared to controls without cautery. After 12 weeks, the bone volume of the group with cautery increased to that of the control without cautery after 6 weeks. Conclusion: An empty defect size of $12mm{\times}5mm$ in the rabbit mandibular model maintains sufficient mechanical stability to not require additional stabilization. However, this defect size allows for bone regeneration across the defect. Cautery of the defect only delays regeneration by 6 weeks suggesting that the performance of bone graft materials in mandibular defects of this size should be considered with caution.

• Smart Media Journal
• /
• v.11 no.5
• /
• pp.75-81
• /
• 2022

In order to respond to carbon neutrality and climate change in agriculture, agricultural machinery, which has been developed centered on internal combustion engines, needs to be converted to an electric-based technology that does not emit greenhouse gases. In this study, simulations for electric UTV suspension design were performed to reduce vibration and shock of electric UTV for agricultural use and to improve driving stability and control performance of the vehicle. The simulation was performed by dividing the tolerance load of the vehicle body and the loaded load state. The range of motion of the suspension spring of UTV is within 30% of the range of motion under condition B under tolerance, the displacement of the UTV suspension with full load is reduced from 264mm to 121mm, and the damping speed is 260mm/s to 300mm/s that it can be seen that the range of motion is within 60%. Suspension design of electric UTV for multi-purpose agricultural work is a very important factor for maintaining agricultural work ability in towing work such as tillage as well as driving and terrain adaptation. The results of this study can be usefully used to determine the spring parameters with the appropriate damping range so that the electric UTV can be used for various agricultural tasks.

• Korean Journal of Optics and Photonics
• /
• v.33 no.5
• /
• pp.218-229
• /
• 2022

We have investigated reliable inspection methods for finding the defects generated during the manufacturing process of lightweight, large-aperture satellite telescope mirrors using silicon carbide, and we have measured the basic physical properties of the mirrors. We applied the advanced ceramic material (ACM) method, a combined method using liquid-silicon penetration sintering and chemical vapor deposition for the carbon molded body, to manufacture four SiC mirrors of different sizes and shapes. We have provided the defect standards for the reflectors systematically by classifying the defects according to the size and shape of the mirrors, and have suggested effective nondestructive methods for mirror surface inspection and internal defect detection. In addition, we have analyzed the measurements of 14 physical parameters (including density, modulus of elasticity, specific heat, and heat-transfer coefficient) that are required to design the mirrors and to predict the mechanical and thermal stability of the final products. In particular, we have studied the detailed measurement methods and results for the elastic modulus, thermal expansion coefficient, and flexural strength to improve the reliability of mechanical property tests.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.15 no.6
• /
• pp.477-484
• /
• 2022

In this study, the cartridge part of the focused ultrasound stimulation system was used as a sample to conduct a skin irritation test and a skin sensitization test through animal experiments among the tests related to GLP (Good Laboratory Practice), a medical device safety evaluation standard. The test was conducted after IACUC approval using 6 female New Zeland White Rabbits. The polar and non-polar stimulation indices were all '0.0'. In addition, in the case of skin sensitization evaluation, 30 guinea pigs approved by IACUC were divided into control and experimental groups, and all induction and induction steps were applied using the eluate itself without separate dilution of the test sample and blank test solution. As a result of the experiment, the skin reaction grade of the control animal was 0 grade, and there was no animal showing more than 1 grade in the skin reaction of the test animal. As a result of both tests, no abnormal skin symptoms were observed, and when applied to the human body to treat patients, the test materials used in the tests will investigate the stability of whether any diseases that cause skin abnormal symptoms will occur.

• Journal of Mushroom
• /
• v.20 no.3
• /
• pp.153-162
• /
• 2022

The purpose of this study was to breed a variety of stable productivity and high storage characteristics of white Hypsizygus marmoreus, which has high demand at domestic and global market due to a low bitter taste and the preference for white species. Accordingly, 'Baekmaru' was bred by hybridizing brown and white cap color species and backcrossing with white species. The 'Baekmaru' variety was bred by crossbreeding the brown and white species and backcrossing the white species. Through repeated cultivation of 'Baekmaru', a variety with a low contamination rate was selected when culturing the spawn for stable cultivation. As a results of demonstration test, the yield of 'Baekmaru' was 14% higher than that of the commercial variety. In addition, among the fruiting body characteristics of 'Baekmaru', diameter and thickness of the pileus were 16.43±15.27mm and 6.46±0.58mm, which were slightly higher than the commercial variety, and the hardness was 2.69±0.89N for the pileus and 3.09±0.89N for the stipe. The shelf life showed less change in thickness and color of pileus compared to commercial variety. The hardness of pileus of 'Baekmaru' was maintained in the range of 3.5 to 4.0N in the 4℃ and 4℃ and 20℃ mixed treatment until 30 days of storage, and was higher than that of the commercial variety. Therefore, it was suggested to be excellent in storability.

• Journal of Advanced Technology Convergence
• /
• v.1 no.1
• /
• pp.33-42
• /
• 2022

The flexors and extensors of the knee joint are essential for maintaining body stability. The purpose of this study was to investigate the correlation between the isokinetic parameters of the knee flexor and extensor muscles and the function of the lower extremity muscles. Twenty-two healthy adults participated in this study. The time to peak torque (TTP), acceleration time (AT), and peak torque (PT) of the knee flexor and extensor muscles were measured. A 20m sprint, Sargent jump, one leg hop test, and side shuffle were measured to evaluate lower extremity function. The correlation between each variable was analyzed using Pearson correlation coefficient. PT of the knee flexor showed a significant correlation with single leg hops and 6M hops in a single leg. PT of knee extensors was found to be significantly correlated with Sargent jumps and triple hops. Based on the results of this study, we suggest that the strength of the knee flexor and extensor muscles has the potential to be used to predict lower extremity function.

• Science of Emotion and Sensibility
• /
• v.26 no.2
• /
• pp.129-140
• /
• 2023

Following ISO 20471, in this study, first, two sets of safety clothes and safety vests were made by designing and attaching animal and bird patterns preferred by children to retroreflective films and black fabrics on those fluorescent fabrics and retroreflective materials prescribed by international standards. Second, by mounting a smart photonic device on the safety clothing so that the body can be recognized from a distance even without an ambient light source at night, children can emit three types of light depending on the situation with just one-touch of the button. From a result of comparison with visibility a day and night by dressing a mannequin in the made smart safety clothing, the difference in visibility was evident at night, it was confirmed that we can see the figure of a person even at a distance of approximately 70 m. Therefore, it is expected to contribute to the prevention of traffic and other accidents on the road, as the drivers driving at night or in bad weather can recognize a person from a distance. Third, in case of the energy is exhausted and cannot maintain the stability of the light-emitting function of the optical faber, we can use energy harvesting device, and the light-emitting time will be extended. As a result it comes up to emit light stably for a long time. And this prove that smart photonic safety clothing can also be used for night workers. Therefore, optical fiber safety clothing is expected to be highly wearable not only in real life but also in dark industrial sites due to stable charging by applying the energy harvesting provided by solar cells.

• Journal of Radiopharmaceuticals and Molecular Probes
• /
• v.7 no.2
• /
• pp.105-111
• /
• 2021

⁸⁹Zr is a positron-emitting radioisotope, which has known as well-suited radioisotope for use in a monoclonal antibody-based imaging agent for immuno-PET. The purpose of this study was to quantitatively evaluate the diagnostic ability of general trastuzumab and thio-trastuzumab as HER2 positive receptors based on Df hexadentate iron chelator. Desferrioxamine-p-SCN (Df-Bz-NCS) and desferroixamine-maleimide (Df-Mal) were purchased from Macrocyclics (Dallas, TX, USA). The trastuzumab was purchased from Roche (Schweiz), and thio-trastuzumab was obtained from professor Hyo-Jeong Hong group (Kangwon National University). The radioisotope ⁸⁹Zr was produced by domestic purification system and KIRAMS using medical cyclotron (50 MeV, Scantronix). The conjugates of Df-trastuzumab and Df-thio-trastuzumab were prepared with Df-Bz-NCS and Df-Mal under basic aqueous solution (pH 8-9) at room temperature, respectively. The conjugates purified by PD-10 column were mixed with dried ⁸⁹Zr chloride. ⁸⁹Zr-labeled conjugates were purified and concentrated by Amicon ultra centrifugal filter. The preparation step and time of ⁸⁹Zr-labeled conjugates was shorted as 4 steps within 2 hours. ⁸⁹Zr-labeled conjugates showed the highly radiochemical purity of over 98%, and were very stable until 7 days by the analysis of radio-ITLC method. Each radio-labeled conjugates were also exhibited the highly stability in both PBS buffer and mouse serum. Immuno-PET imaging of ⁸⁹Zr-labeled conjugates in mice bearing gastric cancer xenograft tumors with HER2 expression showed high tumor uptake in the NCI-N87 HER2-expressing. However, ⁸⁹Zr-Df-Mal-thio-trastuzumab showed a relatively lower tumor-to-background ratio than ⁸⁹Zr-Df-Bz-trastuzumab, as well as whole-body distribution. In the results, ⁸⁹Zr-Df-Bz-trastuzumab was evaluated to have a relatively higher HER2 diagnostic ability than ⁸⁹Zr-Df-Mal-thio-trastuzumab.

• Conservation Science in Museum
• /
• v.29
• /
• pp.33-46
• /
• 2023

Modern and contemporary cultural assets are defined as a collective term for tangible historical and cultural assets produced in the modern and contemporary period (around the opening of Joseon to the present) in Korea. Among them, rickshaws have been used as a major means of transportation for about 40 years since the opening of the ports in Joseon. The repair process for rickshaws divides the rickshaw into three parts, namely the body, the cover, and the wheels, applying a plaster treatment process by referring to the outcomes of the condition assessment and material analysis for the metal, wood, fiber, and paint used. Overall, the repair process is carried out through dry/wet cleaning, joining, stabilization, reinforcement of damaged parts, and other restoration treatments, which reveal metal decorations and patterns on the scaffolding (flowers, arabesque patterns, etc.) that were previously not observable with the naked eye, while also adding to the stability of the artifact. In addition, props were produced to ensure the artifact's safe exhibition.

• Journal of Korean Foot and Ankle Society
• /
• v.26 no.1
• /
• pp.40-47
• /
• 2022

Purpose: The modified Broström repair (BR) technique has yielded good outcomes in patients with chronic ankle instability. This study compared clinical and radiological outcomes between two groups of patients who underwent modified BR or lateral ligament augmentation using suture tapes (ST). Materials and Methods: Seventy-seven patients (ST group [n=47], BR group [n=30]; body mass index <26.61 kg/m²; mean age, 30.7±11.0 years [range, 17~39 years]; mean follow-up, 34.0±12.0 months [range, 24~59 months]) were retrospectively reviewed between January 2014 and July 2017. The Foot and Ankle Outcome Score (FAOS), American Orthopedic Foot and Ankle Score (AOFAS), Foot and Ankle Ability Measure (FAAM), visual analogue scale (VAS) score, and Sefton grading system were used for clinical assessment. The talar tilt angle and anterior talar translation were measured using the Telos stress device (Telos GmbH, Marburg, Germany) at 150 N for radiological evaluation. Results: FAOS, AOFAS, FAAM, and VAS scores improved in both groups at final follow-up (ST, 91.1±5.2, 93±2, 88.1±4.5, 1.5±0.7 vs. BR, 91.3±5.4, 93±3, 83.3±4.8, 1.2±0.7, respectively; p=0.854, 0.971, <0.001, 0.04, respectively). According to the FAOS, mean sports activity scores for the ST and BR groups at the final follow-up were 90.3±3.2 and 76.6±4.2, respectively, reflecting superior outcomes in the ST group (p<0.001). Sefton grading revealed satisfactory functional outcomes (ST, 91.5% vs. BR, 90.0%). There was significant improvement in the talar tilt angle and anterior talar translation in both the ST and BR groups (7.6°±1.2°, 10.5±1.8 mm vs. 4.9°±1.1°, 7.9±1.5 mm, respectively; p<0.001). Conclusion: The ST group demonstrated comparable clinical but better improvement in mechanical stability and FAOS sports scores than the BR group.