• 한국의상디자인학회지
• /
• 제20권3호
• /
• pp.15-26
• /
• 2018

The purpose of this study is to understand the characteristics of body types of adult woman under 155cm in height. To do this, direct measurement data showed that only 660 women aged 20~69 years old and under 155cm tall were classified, and their body type characteristics were analyzed. There are 51 body measurement items used in the analysis. The results of the study are as follows: As a result of the comparison of the body size of all adult women and women under 155cm, it was seen that short women were smaller than the all women, and were flattened with a slightly plump and bendless body. Factor analysis was performed to classify the body type of short women. Six factors including body size, body height, shoulder length and width, waist back length, hip length, and shoulder angle were measured. The results of cluster analysis, using factor scores, were classified into three types. Type 1 is taller among short women and slightly slimmer, and is an A-shape. Type 2 has the largest BMI and was the middle stature among short women It is the most obese body type and is an H-shape. Type 3 is short and plump, with a poor hip and is a Y-shape. As a result of crossover analysis, there was a difference in the body type characteristics of each age group. After all, the body type of the short adult women under 155cm was clearly different from those of all adult women, there was also a difference in the body type among short adult women.

• 복식문화연구
• /
• 제12권1호
• /
• pp.121-135
• /
• 2004

The purpose of this study is to analyze the image evaluation and the preference of tailored jacket according to the body type and the degree of satisfaction with their body of middle-aged women. The subjects used for this study were three hundred and twenty three middle-aged women ranging from 35 to 50 years old. We measured their bodies and asked them report to the questionnaire. The results are as follows. 1) Middle-aged women were classified into four typical types of body. The type 1 was tall and thin and had a front view silhouette with the form of a letter X. The type 2 was the tallest and the medium of fatness and had a front view silhouette with the form of a letter H that the lower part of the body is short. The type 3 was the medium of height and width and had a front view silhouette with the form of a letter A that the upper part of the body is short compared with their height. The type 4 were the shortest and the fattest and had a front view silhouette with the form of a letter Y that the lower and upper parts of the body is the longest. 2) Middle-aged women roughly tended not to be satisfied with part of their body. The results showed that a neck was the most satisfied body part and the weight was the least satisfied as well as overall leg shape among all 13 body parts. 3) The type 1 had the highest the degree of satisfaction on their face size, upper arm girth, waist, hip girth, weight and body shape, etc., excepting hip shape among 4 body types.

• 한국의상디자인학회지
• /
• 제1권1호
• /
• pp.127-139
• /
• 1999

The purpose of this study was to understand the preference of fashion materials according to the degree of consciousness and satisfaction of body. A survey was conducted using the randomly selected 439 woman students in the twenties. The consciousness variable had three levels which were lean, medium, and obese shape for each whole, upper and lower body with self-consciousness. Also, satisfaction variable had three levels which were satisfying, average, and unsatisfying group. We analyzed the data using analysis of correlation, crosstabulation analysis, and analysis of variance including Duncan multiple test. The results were as follows: 1) There was the positive correlation between height, leg, and arm length, and each variable, and the negative correlation between back, hip, thigh, waist, lower leg, ankle, and upper arm, and each variable. Also, we could observe the pattern that the larger the head or the more the weight was, the lower the satisfaction of body was. 2) There were no strong correlation between breast and hand size and each variable. From the crossed classification, we could observe the trend that the smaller the breast was, the lower the satisfaction of body was. 3) There were the strong correlation between whole and upper body in consciousness degree and between whole and lower body in satisfaction. 4) The consciousness of the whole body was shown lean shape 23.4%. medium shape 49.2%, and obese shape 27.2%. For the satisfaction degree of the whole body, satisfaction was shown 6.8%, average 41.7% and unsatisfaction 51.4%, so the satisfaction group is very small. 5) From the analysis for the consciousness degree of the whole body, the preferred fashion materials were polyester and acetate in casual wear, linen, polyester, acryl, T/W, and polyurethan in formal wear, and cotton, nylon, TIC, and T/W in sports wear. There was significant difference in casual wear, formal wear, and sports wear, but, not in underwear and accessories among he consciousness groups. 6) From the analysis for the satisfaction degree of the whole body, the preferred fashion materials were linen, silk, and acetate in casual wear, cotton in underwear, polyurethane in formal wear, and nylon in sports wear. There was the significant difference in casual wear, underwear, formal wear and sports wear, but, not in accessories among the satisfaction groups.

• 한국의류산업학회지
• /
• 제17권4호
• /
• pp.588-596
• /
• 2015

This study aims to provide the basic reference necessary in improving the fitness of a ready-to-wear brand jacket through a research on the wearing conditions and preferences regarding a tailored jacket by body shape of the women in their 30s. The following results were drawn by implementing the research method of the self-administered type survey targeting 201 women in their 30s from August 14~28, 2014. First, the female consumers in their 30s preferred one button slim fit jacket when purchasing a tailored jacket and chose a close-fitting size. Second, the slim fit tailored jacket consumers preferred a jacket with some extra portion in the bust and hip areas but tightly fit in the waist area. Third, when purchasing a jacket under the ready-to-wear size system, the women with a triangle shape similar to a standard body silhouette had less instances of mending a jacket while the women with a big or small rectangle shape different from a standard body silhouette had more experiences of mending a jacket. Accordingly, it is expected of the manufacturers to increase the fitness satisfaction of the consumers by identifying the problems concerning the fitness and suggesting the improvement plans to produce a jacket of a good fitness reflecting the properties of different body shapes through such research on the wearing conditions and preferences regarding a tailored jacket by body shape of the women in their 30s.

• 한국의류학회지
• /
• 제31권5호
• /
• pp.692-704
• /
• 2007

Recently, Basic patterns with excellent body fitness and automation availability are required to be developed in order to automate the patterns of women's clothes. In this study, this reference points, reference lines and segments were fixed onto 3D scan data for the lower body the women in their twenties, they were directly spread out to be 2D flat pattern to facilitate development into the design of slacks adhered closely to the human body such as special and highly-functional clothes, and then slacks 2D pattern was developed for the purpose of seeking scientific approach to the development into basic form slacks and 3d emotional pattern. For conversion of 3D pattern into 2D flat pattern, reference points and segments were created by using Rapid Form of 3D shape analysis software, and triangle mesh of the body surface of the created shape was developed with Auto CAD 2005. The correspondence between slacks and human body was examined by the fixation of major reference lines. Specially, the wearing characteristics of slacks were considered by the fixation of side lines in consideration of posture. As a result of using the way of development to constantly maintain the length while 3D triangle mesh is converted into 2D flat mesh, the shape was shown to be excellently reproduced, and the area of flat pattern was increased compared to the shape of parting plane. Also, the sunk-in curve like the brief line of front crotch length needed a cutting line when it was closely adhered, when mesh was overlapped, and the pattern area was smaller compared to the actual shape.

• 대한인간공학회지
• /
• 제23권2호
• /
• pp.1-12
• /
• 2004

The purposes of this study were to investigate the relationship between anthropometric data of foot and other body sizes. to categorize the foot shape of elementary school boys and to find out determinant factors related the foot that enable us to deduce the foot shape and size for the design of more comfortable shoes. Subjects of this study were 249 elementary school boys of age ranged from 6 to 11 residing Seoul and lncheon area. Anthropometric sizes were measured with the direct measurement method using Martin scales and the indirect measurement method using digital photos. Pearson's correlation, factor analysis. cluster analysis. analysis of variance, post-hoc test, and cross tabs were performed for statistical analysis of the data by SPSS program. From the investigation on the relationship between foot-related items and body items, most items of foot measure were significantly related to body size items. However, angle of the foot did not related to other body sizes although other height items and mass items of the foot did have relationships with other body sizes. Results of ANOVA indicated there were significant differences in foot-related items except for items of foot angle and all body anthropometric items by subjects' age. This implicates big toe angle, little toe angle and foot ratio factors are required in sizing shoes besides foot length. On the basis of cluster analysis using factor scores. three different foot shapes were categorized. Type 1 was large and wide foot, Type 2 was small and narrow foot with large toe angle. and Type 3 was medium foot with no deformity on big toe. These three groups show significant differences in almost all measurement items. However, Rorher index and foot angle didn't show any significant differences among groups. This implicates the foot shape can be a determinant of shoe size.

• 한국농촌생활과학회지
• /
• 제9권1호
• /
• pp.9-18
• /
• 1998

This study aimed to find out the relationship between the body shape and the degree of obesity and the eating attitude influenced by the eating disorder among male and female college students. Followings are the summary of the results obtained in this study : 1. Male students perceived their own body shape properly, however female students perceived their body shape fatter than their real one even if almost all of them were maintaining normal weight. 2. For both male and female students the EAT-26 score was high when they perceived themselves fat, and in the group of students perceiving themselves fat the F I score was high and the F III score was low. Contray to this, in the group of students perceiving themselves thin the F nt score was high. The EAT-26 of female students marked higher than that of males in total questionares. 3. The EAT-26 score was high for both male and female students whose degree of obesity was high. The higher the degree of obesity the higher the F I score, and the lower the degree of obesity the higher the F III score. 4. For both male and female students the dieting frequency was high when they were in the group perceiving themselves fat and in the group with the high degree of obesity. And the number of females' is higher than that of males'. For male students there was no significant difference of dieting frequency in accordance with the perceived body shape and the degree of obesity. However, for female students the frequency was high when they were in the group perceiving themselves fat and in the group with the high degree of obesity. The frequency was high when they were in the group perceiving themselves thin and in the group with the low degree of obesity. 5. For the matter of relationship between the degree of obesity and the frequency of buying meals there was significant difference only in the female students and the frequency of buying meals was higher when the degree of obesity was higher.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2009년 추계학술대회논문집
• /
• pp.38-43
• /
• 2009

The objective of this study is to get a fundamental data for the shape of a robot which operates in blood vessels. The overall analysis was calculated with a CFD code. The flow was idealized as a pulsatile flow, and first the robot was assumed as a simple capsule model. Then a drag of the body in the flow was calculated, and this process was repeated, varying the shape. To validate all the result, the pulastile velocity simulation was compared with the theoretical data, and the drag of a body was compared with the existing data of the other papers first. Then with the next calculation the guideline for the design of robot shape was presented.

• 한국정밀공학회지
• /
• 제19권11호
• /
• pp.129-136
• /
• 2002

Electric vehicle body has to be subjected to uniform load and demand auxiliary equipment such as air pipe, electric wire pipe and gas pipe. Especially, lightweight vehicle body is salutary to save operating costs and fuel consumption. Cross beam supports the weight of passenger and electrical equipments and account for the most of weight of vehicle body. Therefore this study performs the size and the shape optimization of crossbeam for electric vehicle using GENESIS 7.0 and presents the effect of mass reduction and the shape of hole in cross beam.

• 복식문화연구
• /
• 제28권1호
• /
• pp.1-14
• /
• 2020

This study is based on a representative body shape drawn from previous studies that classify adult male torso shapes. In this study, a design method is proposed by developing a tight-fit pattern that can be easily developed into various items and designs using the body surface development figure. This is obtained by converting the 3D body shape of the model representing the representative body shape. The specific design method was conducted as follows. Actual measurement values were used for waist back length, waist-to-hip length, shoulder length. The scye depth was determined as C/4-1.7 cm, and the front and back Interscye was set at (1/2 × actual measurements)-0.2 cm. The front-back neck breadth was set to (1/5 × base neck circumference)-1.3 cm and (1/5 × base neck circumference) cm. The front-back neck depth was set to (1/5 × base neck circumference)-1.2 cm and 3.5 cm. Front chest circumference was C/4-1 (front-back difference)cm; (1/4 × back chest circumference) was C/4 + 1 (front-back difference) + 0.3 (dart amount) cm. Front waist circumference was W/4-0.2 (front-back difference) + 2.2 (dart amount) cm; back waist circumference was W/4 + 0.2 (front-back difference) + 2.5 (dartamount) cm; front hip circumference was H/4 + 0.2 (ease) + 0.2 (front-back difference) cm; and back hip circumference was H/4 + 0.2 (ease)-0.2 (front-back difference) cm; Front droop was 1.6 cm. The newly developed tight-fit pattern is expected to be of great use as a basis for garment construction.