• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.7
• /
• pp.637-646
• /
• 2010

A time-domain panel method based on the potential flow theory and the time-stepping method is developed to predict the steady/unsteady aerodynamic characteristics of FM07, which is the BWB (Blended-wing body) type MAV. In the aerodynamic analyses, we used two types of the initial model(Case I) and the improved model(Case II), which is moved the gravity center toward the rear and has larger aspect ratio. In the steady aerodynamic analyses, it is revealed that improved model has higher lift to drag ratio(L/D) and more stable pitch characteristic than those of the initial model. In the unsteady aerodynamic analyses for sudden acceleration motion similar to the launch phase of MAV, it seemed that there is a rapid increase of the lift coefficient after the launch and unsteady results are good agreed compare with steady results in just a few times. In the analysis for pitch oscillation motion, which is occurred at the cruise condition of the FM07, it shows that unsteady aerodynamic coefficients looped around steady results and the improved model has more sensitive aerodynamic characteristics.

• Analyses & Alternatives
• /
• v.2 no.1
• /
• pp.31-69
• /
• 2018

This study examines the role of science in resolving trade disputes. After the Great East Japan Earthquake of 11 March 2011 that not only jeopardized the people of Japan, but also put the safety of an entire region at risk, the Republic of Korea (Korea) has imposed import bans as well as increased testing and certification requirements for radioactive material on Japanese food products. Japan has challenged these restrictions at the World Trade Organizations Dispute Settlement Body (DSB). This study aims to explain how international trade agreements and previous DSB rulings have dealt with different scientific viewpoints provided by confronting parties. In doing so, it will contrast the viewpoints espoused by Korean and Japanese representatives, and then analyzes the most similar case studies previously ruled on by the DSB, including the case of beef hormones and the case of genetically modified crops including biotech corn, both between the United States and the European Communities (EC). This study finds that science is largely subordinate to national interests in the case of state decision-making within the dispute settlement processes, and science has largely been relegated to a supportive role. Due to the ambiguity and lack of truly decisive decisions in the Appellate Body in science-based trade disputes, this study concludes that the Appellate Body avoids taking a firm scientific position in cases where science is still inconclusive in any capacity. Due to the panel's unwillingness to establish expert review boards as it has the power to do, instead favoring an individual-based system so that all viewpoints can be heard, it has also developed a system with its own unique weaknesses. Similar to any court of law in which each opposing party defends its own interests, each side brings whatever scientific evidence it can to defend its position, incentivizing them to disregard scientific conclusions unfavorable to their position. With so many questions that can arise, combined with the problems of evolving science, questions of risk, and social concerns in democratic society, it is no wonder that the panel views scientific information provided by the experts as secondary to the legal and procedural issues. Despite being ruled against the EC on legal issues in two previous cases, the EC essentially won both times because the panel did not address whether its science was correct or not. This failure to conclusively resolve a debate over whose science is more scientific enabled the EC to simply fix the procedural issues, while continuing to enforce trade restrictions based on their scientific evidence. Based on the analysis of the two cases of disputes, Korea may also find itself guilty of imposing an unwarranted moratorium on Japan's fish exports, only to subsequently pass new restrictions on labelling and certification requirements because Japan may have much scientific evidence at its disposal. However, Korea might be able to create enough uncertainty in the panel to force them to rule exclusively on the legal issues of the case. This will then equip Korea, like the EC in the past, with a way of working around the ruling, by changing whatever legal procedure they need to while maintaining some, if not most, of its restrictions when the panel fails to address its case on scientific grounds.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.986-995
• /
• 2008

This study introduces the testing results of the AL car body which is applied to LRT. The LRT car body is made of aluminum structure materials like a sandwich panel. The static load test was performed to evaluate the structural characteristic and stability of the AL car body. Considering the vertical, compressive, twisting load and 3-point supporting, Bend natural frequency Measurement, Twist natural frequency Measurement type as a testing terms, the structural stability of a car body was evaluated.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.1604-1612
• /
• 2009

This study introduces comparison the testing results of the AL car body which is applied to FSW and GMAW welding method. The car body is made of aluminum structure materials like a sandwich panel. The static load test was performed to evaluate the structural characteristic and stability of the AL car body. Considering the vertical, compressive, twisting load and 3-point supporting, Bend natural frequency Measurement, Twist natural frequency Measurement type as a testing terms, the structural stability of a car body was evaluated.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.17 no.2
• /
• pp.15-24
• /
• 2013

Purpose: With the demand of SPECT/CT increasing, the interest in complex diagnostic information of CT is rising along with the expansion of various studies on potential performance value. But the study on reduction of exposure dose generated by CT is not being conducted enough. Therefore, in this study, the goal is to identify how much dose reduction exists when performing the extremity bone SPECT/CT using the flat-panel CT. Materials and Methods: The extremity bone SPECT/CT was performed with two equipments -BrightView XCT (Philips Healthcare, Cleveland, USA) and Brilliance 16 CT (Philips Healthcare, Cleveland, USA)-to identify the exposed dose and image quality resulted by changing scan parameter (mAs) applying for both equipment respectively. The noise value of image and spatial resolution were measured with AAPM CT phantom. Tube voltage (kVp) was fixed to 120 kVp, tube current (mAs) calculated at different mA (20, 30, 40, 50, 60, 70, 80) was applied to both equipments respectively. DLP (dose length product) were calculated at the same distance at respective mAs. Also, we acquired images and % contrast with NEMA IEC body phantom to confirm the effect on image. The output of statistics was analyzed by SPSS ver.18. Results: Regarding AAPM phantom, the noise decreased as the tube current (mAs) increased and flat-panel had less noise than Helical CT. This difference increased at lower dose exposure. As to the evaluation of spatial resolution, we can differentiate the space up to 0.75 mm with both equipments. With scan parameter (mA) growing, the value of DLP increased up to 54-216 mGy cm at flat-panel CT and up to 177-709 mGy cm at Helical CT. Regarding NEMA IEC body phantom, same sphere with varied parameter (mA) shows that similar results. Conclusion: There is no significant differences of image quality in both flat-panel and Helical CT when the scan parameter (mA) is changed respectively. Moreover, we can identify the reduction of exposure dose and confirm %contrast analysis value with maintaining image quality. Therefore, at the extremity bone SPECT/CT requiring high spital resolution without the wide ROI, the flat-panel CT is considered to be more useful and it expected to result in the similar image quality with lower exposure dose compared to Helical CT. Additionally, through this study, we expect to help the reduction of the unnecessary exposure dose.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.08a
• /
• pp.37-44
• /
• 2004

Automotive company has been endeavoring to develop high strength steels to get higher fuel efficiency of car since the oil shortage in 1970s and to cope with the recent strict environmental regulation. Outer panels(Hood, Roof, Door and Fender) for automobile require higher dent resistance. Bake-hardenable(BH) steels are known as useful for their high deep drawability and high dent resistance. Recently BH steels are increasingly adapted for outer panel use due to their high drawability and high dent resistance. In this study effect of temper rolling on formability (textures, r value) and bake hardenability is investigated fur improving characteristic of bake-hardenable steels.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.2
• /
• pp.228-233
• /
• 2002

TWB(Tailor Welded Blanks) is one of the recent techniques to reduce the weight and cost of the body members. To apply the TWB technique, we must decide the position of the welding line and the thickness of the welded blanks. Although many researchers have tried to check the formability of welded blanks, there are not so many researches from the structural point of view. In this paper, the TWB technique is applied to combine the door inner panel and the hinge face panel into one piece. The finite element structural analysis of the door assembly leads to the final design of the tailor welded door inner panel, which shows the mass reduction of 1.08kg without the sacrifice of the structural stiffness. The structural stiffness analysis includes the frame stiffness analysis, the belt line stiffness analysis, the door sagging analysis and the vibration analysis.

• Transactions of Materials Processing
• /
• v.9 no.6
• /
• pp.567-573
• /
• 2000

An analysis system for evaluating the design of dieface of stamping press dies is developed. The die design analysis system interfaced with CATIA via universal or NASTRAN data format provides the design information such as binder-wrap, punch contact status, section length change ratio, wrinkle symptom etc., which are crucial in predicting the defects of initial shape of the sheet in the dieface design stage. The graphic post-processor of developed system which displays 3-dimensional shapes of tool and die and analysis results, helps the interpretation of design evaluation. The dieface design analysis system was tested in draw dies of front floor panel and quarter panel of auto-body in order to verify the usefulness and validity of the system The examples show that the developed system would be a good tool in evaluating dieface designs.

• Child Health Nursing Research
• /
• v.27 no.4
• /
• pp.328-338
• /
• 2021

Purpose: This study aimed to identify the factors influencing positive subjective health awareness of middle school-age multicultural adolescents in Korea. Methods: This study used data from the fourth to sixth waves of the Multicultural Adolescents Panel Study conducted by the National Youth Policy Institute. In this study, a panel logit model analysis was performed using the Eviews 8.0 program (p<.050). Results: Socioeconomic status (r=.02, t=2.13, p=.033), body satisfaction (r=.71, t=1.97, p=.048), and depression (r=-.74, t=2.35, p=.018) influenced positive subjective health awareness in multicultural adolescents. When multicultural characteristics were entered into a statistical model with environmental and personal characteristics, multicultural characteristics did not have a significant influence on positive subjective health awareness. Conclusion: Environmental, personal, and multicultural characteristics were related to positive subjective health awareness in multicultural adolescents; thus, an integrated approach considering those variables is recommended. Nursing interventions and educational programs are needed to improve the psychological status of multicultural adolescents and reduce prejudice about them. In addition, nurses need to be sensitive to multicultural characteristics and the developmental characteristics of multicultural adolescents.

• Applied Chemistry for Engineering
• /
• v.27 no.4
• /
• pp.371-379
• /
• 2016

In this article, the foamed body of glass was manufactured from the waste borosilicate glass produced by wet pulverization process without additional pretreatment which can be used as a recycling method for waste LCD panel glass. Each 100 g of pulverized waste borosilicate glass with the size of less than 270 mesh were mixed with 0.3 weight fraction of carbon and 1.5 weight fraction of $Na_2CO_3$, $Na_2SO_4$ and $CaCO_3$ and let them foamed for 20 minutes at $950^{\circ}C$ to manufacture the foamed body having the density of less than $0.3g/cm^3$. Additionally, adding $SiO_2$ or $H_3BO_3$ to the mixture enabled the foamed body to have efficient formation of open pores which showed the possibility for producing the foamed body with new functionalities such as sound absorption.