• Journal of Medicine and Life Science
• /
• 제19권2호
• /
• pp.46-56
• /
• 2022

The incidence of fever complicating percutaneous coronary intervention (PCI) is rare. However, little is known regarding the cause of fever after PCI. Therefore, this study aimed to determine the clinical characteristics of patients with acute myocardial infarction (AMI), with or without fever, after PCI. We enrolled a total of 926 AMI patients who underwent PCI. Body temperature (BT) was measured every 4 hours or 8 hours for 5 days after PCI. Patients were divided into two groups according to BT as follows: BT<37.7℃ (no-fever group) and BT ≥37.7℃ (fever group). The 2 years clinical outcomes were compared subsequently. Fever after PCI was associated with higher incidence of major adverse cardiac events (MACE) (hazard ratio [HR], 1.56; 95% confidence interval [CI], 1.07-2.28; P=0.021), all-cause death (HR, 2.32; 95% CI, 1.18-4.45; P=0.014), cardiac death (CD) (HR, 2.57; 95% CI, 1.02-6.76; P=0.049), and any revascularization (HR, 1.69; 95% CI, 1.02-2.81; P=0.044) than without fever. In women, prior chronic kidney disease, lower left ventricular (LV) ejection fraction, higher LV wall motion score index, white blood cell count, peak creatine kinase-myocardial band level, and longer PCI duration were associated with fever after PCI. Procedures such as an intra-aortic balloon pump, extracorporeal membrane oxygenation, continuous renal replacement therapy, central and arterial line insertion, and cardiopulmonary resuscitation were related to fever after PCI. Fever after PCI in patients with AMI was associated with a higher incidence of MACE, all-cause death, CD, and any revascularization at the 2 years mark than in those without fever.

• 한국응용과학기술학회지
• /
• 제39권2호
• /
• pp.335-339
• /
• 2022

본 연구의 목적은 정적 플랭크 운동의 동작 차이에 따른 코어근육의 근활성도를 비교하는 것이었다. 본 연구의 대상자는 "J"대학교 20대 남성 10명을 대상으로 진행하였고(연령, 23.20±0.65 세; 신장, 174.54±1.51 cm; 체중, 70.00±2.24 kg; 신체질량지수, 22.94±0.51 kg/m²), 4가지의 풀, 엘보우, 사이드 및 리버스 정적 플랭크 동작을 수행하였으며, 근전도 분석을 위한 표면전극 부착 부위는 신체 근육의 우측복직근, 외복사근, 광배근 및 척추기립근으로 설정하였다. 본 실험 결과, 광배근과 척추기립근의 근활성도는 리버스 플랭크 동작 시 가장 높게 나타났고(p<.001), 복직근과 외복사근의 근활성도는 엘보우 플랭크 동작 시 가장 높게 나타났다(p<.001). 따라서 본 연구의 결과는 추후 정적 플랭크 동작 시 효과적인 운동 프로그램의 자료가 될 것으로 기대된다.

• 한국전문물리치료학회지
• /
• 제30권3호
• /
• pp.174-183
• /
• 2023

Background: Office workers experience neck or back pain due to poor posture, such as flexed head and forward head posture, during long-term sedentary work. Posture correction is used to reduce pain caused by poor posture and ensures proper alignment of the body. Several assistive devices have been developed to assist in maintaining an ideal posture; however, there are limitations in practical use due to vast size, unproven long-term effects or inconsistency of maintaining posture alignment. We developed a headphone and necklace posture correction system (HANPCS) for posture correction using an inertial measurement unit (IMU) sensor that provides visual or auditory feedback. Objects: To demonstrate the test-retest reliability and concurrent validity of neck and upper trunk flexion measurements using a HANPCS, compared with a three-dimensional motion analysis system (3DMAS). Methods: Twenty-nine participants were included in this study. The HANPCS was applied to each participant. The angle for each action was measured simultaneously using the HANPCS and 3DMAS. The data were analyzed using the intraclass correlation coefficient (ICC) = [3,3] with 95% confidence intervals (CIs). Results: The angular measurements of the HANPCS for neck and upper trunk flexions showed high intra- (ICC = 0.954-0.971) and inter-day (ICC = 0.865-0.937) values, standard error of measurement (SEM) values (1.05°-2.04°), and minimal detectable change (MDC) values (2.92°-5.65°). Also, the angular measurements between the HANPCS and 3DMAS had excellent ICC values (> 0.90) for all sessions, which indicates high concurrent validity. Conclusion: Our study demonstrates that the HANPCS is as accurate in measuring angle as the gold standard, 3DMAS. Therefore, the HANPCS is reliable and valid because of its angular measurement reliability and validity.

• Steel and Composite Structures
• /
• 제49권5호
• /
• pp.487-502
• /
• 2023

In the realm of nanotechnology, the nonlocal strain gradient theory takes center stage as it scrutinizes the behavior of spinning cantilever nanobeams and nanotubes, pivotal components supporting various mechanical movements in sport structures. The dynamics of these structures have sparked debates within the scientific community, with some contending that nonlocal cantilever models fail to predict dynamic softening, while others propose that they can indeed exhibit stiffness softening characteristics. To address these disparities, this paper investigates the dynamic response of a nonlocal cantilever cylindrical beam under the influence of external discontinuous dynamic loads. The study employs four distinct models: the Euler-Bernoulli beam model, Timoshenko beam model, higher-order beam model, and a novel higher-order tube model. These models account for the effects of functionally graded materials (FGMs) in the radial tube direction, giving rise to nanotubes with varying properties. The Hamilton principle is employed to formulate the governing differential equations and precise boundary conditions. These equations are subsequently solved using the generalized differential quadrature element technique (GDQEM). This research not only advances our understanding of the dynamic behavior of nanotubes but also reveals the intriguing phenomena of both hardening and softening in the nonlocal parameter within cantilever nanostructures. Moreover, the findings hold promise for practical applications, including drug delivery, where the controlled vibrations of nanotubes can enhance the precision and efficiency of medication transport within the human body. By exploring the multifaceted characteristics of nanotubes, this study not only contributes to the design and manufacturing of rotating nanostructures but also offers insights into their potential role in revolutionizing drug delivery systems.

• 한국전문물리치료학회지
• /
• 제30권4호
• /
• pp.268-274
• /
• 2023

Background: Ankle sprains occur frequently among humans who undertake various body movements. Diverse walking environments and dual tasks, that can affect ankle sprains, have been studied. However, there is a lack of research on inter-trial variability according to the changes in gait speed. Objects: The purpose of this study was to compare the adaptive ability of walking between the subjects with chronic ankle instability and healthy adults while performing a walking task with different walking speeds. Methods: In this study, 24 people in the chronic ankle instability group and 24 people in the healthy ankle group were selected as subjects. The length of the pre-measurement and the actual walking measurement were both set to 4.6 m. Once the subjects entered the measurement section, they changed their gait speed according to the randomly assigned speed change. Gait was measured twice and the average value was used for the analysis. Results: The coefficient of variation (CV) of cycle time in subjects with chronic ankle instability showed a significant difference in all cases except when the subjects changed their speed from preferred to slow and from slow to preferred. The CV of step length demonstrated a significant difference in all cases except for the change from slow to preferred and from preferred to fast. The cycle time and step length differential showed a significant difference only when the subjects changed the speed from slow to fast. Conclusion: The subjects with chronic ankle instability were found to have significantly reduced walking adaptability while performing inter-trial variability tasks with different gait speeds compared to healthy subjects.

• 한국인터넷방송통신학회논문지
• /
• 제23권5호
• /
• pp.63-70
• /
• 2023

본 논문에서는 대부분의 노인들이 가지고 있는 만성 질환 중의 하나인 근골격계 질환을 해결할 수 있는 혼합현실 기반의 재활 운동 솔루션을 제안한다. 현대 사회는 점점 증가하고 있는 노인층이 많아지면서 사무직에 종사가 많아지고 좌식 활동이 많아지게 되었다. 반복되는 사무 활동으로 근력 감소가 많아지고 이로 인해 일상생활에 많은 어려움을 가지고 있다. 본 연구에서는 이러한 근골격계 만성 질환을 해결하기 위해 혼합현실 기반의 운동 플랫폼을 개발하였다. 가상현실은 어지러움 때문에 노인들에게 적합하지 않다. 또한, 자체적으로 개발한 관성센서 기반의 웨어러블 센서를 개발하여 상체 중요 부위에 부착하여 편하게 운동할 수 있게 하였다. 혼합현실 환경에서 웨어러블 센서로부터 실시간 원시 데이터를 실시간 수집하여 이를 가상 환경의 아바타와 동기화되기 위한 변환 알고리즘을 개발하였다. 사용자는 혼합현실 환경에서 실시간 재활 운동이 정확하게 이루어지는가를 아바타를 통해 확인할 수 있으며 보다 정확한 운동을 할 수 있게 하였다.

• Korean Journal of Radiology
• /
• 제22권4호
• /
• pp.634-651
• /
• 2021

Dynamic X-ray (DXR) is a functional imaging technique that uses sequential images obtained by a flat-panel detector (FPD). This article aims to describe the mechanism of DXR and the analysis methods used as well as review the clinical evidence for its use. DXR analyzes dynamic changes on the basis of X-ray translucency and can be used for analysis of diaphragmatic kinetics, ventilation, and lung perfusion. It offers many advantages such as a high temporal resolution and flexibility in body positioning. Many clinical studies have reported the feasibility of DXR and its characteristic findings in pulmonary diseases. DXR may serve as an alternative to pulmonary function tests in patients requiring contact inhibition, including patients with suspected or confirmed coronavirus disease 2019 or other infectious diseases. Thus, DXR has a great potential to play an important role in the clinical setting. Further investigations are needed to utilize DXR more effectively and to establish it as a valuable diagnostic tool.

• PNF and Movement
• /
• 제22권1호
• /
• pp.43-54
• /
• 2024

Purpose: Falls among persons older than 65 years are a significant concern due to their frequency and severity. This study aimed to develop a vest-type embedded artificial intelligence (AI) system capable of detecting and predicting falls in various scenarios. Methods: In this study, we established and developed a vest-type embedded AI system to judge and predict falls in various directions and situations. To train the AI, we collected data using acceleration and gyroscope values from a six-axis sensor attached to the seventh cervical and the second sacral vertebrae of the user, considering accurate motion analysis of the human body. The model was constructed using a neural network-based AI prediction algorithm to anticipate the direction of falls using the collected pedestrian data. Results: We focused on developing a lightweight and efficient fall prediction model for integration into an embedded AI algorithm system, ensuring real-time network optimization. Our results showed that the accuracy of fall occurrence and direction prediction using the trained fall prediction model was 89.0% and 78.8%, respectively. Furthermore, the fall occurrence and direction prediction accuracy of the model quantized for embedded porting was 87.0 % and 75.5 %, respectively. Conclusion: The developed fall detection and prediction system, designed as a vest-type with an embedded AI algorithm, offers the potential to provide real-time feedback to pedestrians in clinical settings and proactively prepare for accidents.

• 한국운동역학회지
• /
• 제34권2호
• /
• pp.53-62
• /
• 2024

Objective: The purpose of this study was to analyze the differences in kinematic factors according to stretching treatment, myofascial release treatment, and static stretching treatment conditions during squat. Method: Twelve males with resistance training experience participated in this study. Participants performed squats without treatment (Pre-Test), and performed squats after treatment with the myofascial release technique (MRT) and static stretching (SS) on different days (post-test). Squat movements were captured using eight motion capture cameras (sampling rate: 250 Hz), and the peak joint angles of the ankle, knee, hip, and pelvis were calculated for each direction. One-way repeated ANOVA and Bonferroni post hoc analyses using SPSS 27 (IBM Corp. Armonk NY, USA) were used to compare the peak joint angle of the lower extremity joints and pelvis among the normal condition (squat without treatment), MRT condition (squat after MRT treatment) and SS condition (squat after static stretching). The statistical significance level was set at .05. Results: It was observed that the maximum ankle joint flexion angle during squats was statistically reduced under conditions of myofascial release and static stretching (p<.05), in comparison to the scenario where no stretching was performed. Furthermore, static stretching was found to enhance the maximum hip flexion angle during squat (p<.05), whereas the myofascial release stretching technique resulted in the minimal posterior pelvic tilt angle (p<.05). Conclusion: Employing myofascial release stretching as a preparatory exercise proved to be more efficacious in maintaining body stability throughout the execution of high-intensity squat movements by effectively managing the posterior tilt of the pelvis, as opposed to foregoing stretching or engaging in static stretching.

• Steel and Composite Structures
• /
• 제50권2호
• /
• pp.201-216
• /
• 2024

This paper is motivated by the lack of studies relating to vibration and nonlinear resonance of fluid-conveying cantilever porous GPLR pipes with fractional viscoelastic model resting on nonlinear foundations. A dynamical model of cantilever porous Graphene Platelet Reinforced (GPLR) pipes conveying fluid and resting on nonlinear foundation is proposed, and the vibration, natural frequencies and primary resonant of such system are explored. The pipe body is considered to be composed of GPLR viscoelastic polymeric pipe with porosity in which Halpin-Tsai scheme in conjunction with fractional viscoelastic model is used to govern the construction relation of the nanocomposite pipe. Three different porosity distributions through the pipe thickness are introduced. The harmonic concentrated force is also applied on pipe and excitation frequency is close to the first natural frequency. The governing equation for transverse motion of the pipe is derived by the Hamilton principle and then discretized by the Galerkin procedure. In order to obtain the frequency-response equation, the differential equation is solved with the assumption of small displacement, damping coefficient, and excitation amplitude by the multiple scale method. A parametric sensitivity analysis is carried out to reveal the influence of different parameters, such as nanocomposite pipe properties, fluid velocity and nonlinear viscoelastic foundation coefficients, on the primary resonance and linear natural frequency. Results indicate that the GPLs weight fraction porosity coefficient, fractional derivative order and the retardation time have substantial influences on the dynamic response of the system.