• Journal of Korean Academy of Nursing
• /
• v.40 no.6
• /
• pp.775-784
• /
• 2010

Purpose: The study was conducted to describe body shapes of school age children using the degree of obesity index (DOI) and body mass index obesity index classified by the Ministry of Education, Science and Technology (M-BOI) and Seoul Metropolitan Office of Education (S-BOI). Methods: In this cross sectional descriptive study health screening data for school children collected in 2007 was used. Results: Data were analyzed for 2,193 4th-6th grade boys (52%) and girls who attended 4 schools in rural areas. DOI determined that only 44.3% of students had average weight. This proportion was much lower than the results of other methods (74.3-77.6%). All three methods defined girls (51.3-61.8%) as skinnier than boys. Skinny and average body shaped children classified by DOI and obese children classified by S-BOI were heavier and taller and presented higher degrees of obesity (DO) and BMI scores than by other methods. M-BOI and S-BOI presented statistically significant positive correlations with weight, height, DO and BMI, while DOI was not correlated with height. Conclusion: BMI based body shape classifications provide a more rigorous classification of body shape which are favorable for school health professionals with limited resources and policy makers for internationally comparable references.

• The Journal of Korean Society for Radiation Therapy
• /
• v.30 no.1_2
• /
• pp.17-25
• /
• 2018

Purpose : To compare the radiation doses of prostate cancer patients according to changes in abdominal body shape and energy during Volumetric modulated arc therapy(VMAT). Materials and Methods : Seven patients with prostate cancer were enrolled in this study. VMAT treatment plan was established at 6, 10, and 15 MV while changing from -2.0 cm to 2 cm by 0.5 cm. Conformal index(CI), homogeneous index(HI), $D_{max}$, $D_{95%}$, $D_{50%}$ and $D_{2%}$ of PTV were examined in order to evaluate the change of dose in the target organ according to body shape change. Normal organ of the femoral head, rectum and bladder was analyzed to evaluate dose changes. Results : The dose of $D_{max}$ 6 MV in PTV increased to 107.2 % in 1.0 cm body shape reduction, and 10 MV and 15 MV dose increased to 107.1 % and 107.0 % in 1.5 cm body reduction, respectively. The dose of $D_{50%}$ 6 MV in PTV decreased to 99.64 % in 1.0 cm body shape increase, and in 10 MV and 15 MV dose decreased to 99.79 % and 99.97 % in 1.5 cm body increase, respectively. In 2.0 cm body type increase, the dose was decreased to 99.30 % and 99.52 %, respectively. Doses for rectum and bladder gradually increased with decreasing weight, and dose decreased with decreasing weight. 6 MV, and $V_{70Gy}$ at 10 MV increased from 11.50 % to 12.76 % when the external shape decreased by 2.0 cm. The bladder $V_{70Gy}$ also increased from 14.0 % to 15.2 %. It was also shown that the dose increased as the body weight decreased in the femoral head. Conclusion : In the treatment of VMAT, dose distribution can be changed according to the change of abdominal shape. SSD and CBCT were used to decrease the body shape by more than 1cm or more than 1.0 cm at 6 MV and the body shape by more than 1.5 cm or more than 1.5 cm at 10 MV or 15 MV. It is considered that a new treatment plan should be established through re-simulation.

• Journal of the Society of Naval Architects of Korea
• /
• v.55 no.3
• /
• pp.252-264
• /
• 2018

The calculation of steady-state cavitating flows around Supercavitating Underwater Bodies (SUB's), which consist of a circular disk head (cavitator), a conical fore-body, a cylindrical middle-body and either a boat-tail or a flare-tail, are carried out. To calculate the axisymmetric cavitating flow, used is a commercial computational fluid dynamics code based on the finite volume method, Fluent. From the analysis of numerical results, the cavity and drag, affected by the fore-body and tail of the SUB's, are investigated. Firstly, the effect of the fore-body shape is investigated with the same disk cavitator and a cylindrical rear-body of fixed diameter. Then with the same cavitator and a fixed fore-body, the effect of the rear-body shape is investigated. Before the cavity generated by the cavitator covers the slant of fore-bodies sufficiently, the larger the cone angle of the fore-body(i.e., the shorter the slant length), the larger the drag and the slower the development of cavity. After the cavity covers the fore-body completely so that the pressure drag component of the body is vanished, the characteristics of drag-velocity curves are identical. Also, as the tail angle is bigger, the cavity generated by the cavitator is suppressed further and the drag becomes larger. The peak of the drag appears for the flare-tail, i.e., when the tail angle is positive(+). On the contrary, the trough of the drag appears for the boat-tail, i.e., when the tail angle is negative(-). When the tail angle is 5 degrees, the peak of the drag appears at the body speed of 80m/s and the value of the drag is 43% larger than that at the design speed of 100m/s. When the tail angle is -5 degrees, the trough of the total drag appears at 75m/s and that drag is 30% smaller than that of the cavitator, which means the rest of the body has a negative drag.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.585-588
• /
• 2005

Many process parameters have an effect on the auto-body panel forming process. A well designed blank shape causes the material to flow smoothly, reduces the punch and yields a product with uniform thickness distribution. Therefore, the determination of an initial blank shape plays the important role of saving time and cost in the auto-body panel forming process. For these reasons, some approaches to estimate the initial blank shape have been implemented, in this paper The one-step approach using a finite element inverse method will be introduced to predict the optimal forming with changing of blank pressure the developed program is applied to auto-body panel forming.

• Journal of Korean Biological Nursing Science
• /
• v.17 no.3
• /
• pp.262-270
• /
• 2015

Purpose: The purpose of this study was to explore the correlates of maternal perception (identification and satisfaction) of children's weight, maternal body shape satisfaction, and maternal feeding styles in Korean preschool-aged children. Methods: A cross-sectional survey design was utilized. Participants consisted of 287 pairs of preschool-aged children (3-6 years) and their mothers. Data were analyzed by ${\chi}^2$-test, Fisher's exact test, ANOVA, and the Pearson correlation coefficient. Results: Among the 287 mothers, 47.7% underestimated their children's weight, while 15.7% overestimated it. 46.7% of the mothers wished their children weighed more, while 11.1% of them wished their children weighed less. The mean score of maternal body shape satisfaction was $83.75{\pm}28.77$. The mean score of parent-centered feeding styles was $2.95{\pm}0.54$, and the mean score of child-centered feeding styles was $3.33{\pm}0.42$. There were statistically significant correlations between maternal identification of children's weight and children's body mass index (BMI) (r=-.366, p<.001). In addition, there were statistically significant correlations between maternal satisfaction of children's weight and children's BMI (r=-.484, p<.001), maternal BMI (r=-.126, p=.033), and maternal body shape satisfaction (r=-.127, p=.031). Conclusion: The results of the study suggest that intervention programs for mothers to develop more accurate perception of their child's weight should be established.

• Fashion & Textile Research Journal
• /
• v.20 no.4
• /
• pp.429-438
• /
• 2018

This study analyzed the fit-zone of the neck for females in their 60s. We considered the standard body types of females in their 60s and the four body types from the sixth Size Korea. The results of the study were as follows. We could not determine a pattern formula for the neck based on the changes in the body type of females in their 60s. However, the position of the lateral neck point generally showed a significant difference from that of females in their 20s. In the case of the shoulder angle, the point of the shoulder was angled slightly towards the back in all body types. It was also found that the curve of the neck circumference for both the collar and the bodice should have been smoother than what was shown on the 3D shape. The larger the height difference between the point of the back of the neck and the lateral neck point in the 3D shape, the smoother the design should be at the curve of the circumference at the front of the neck. A larger curvature in the front radius of the 3D shape increased the difference in the shape of the curve between the collar and the basic pattern of the bodice. Hence, a more careful design is required for these parts of the pattern. In addition, the more the front neck is bent, the smoother the circumference curve should be in the pattern design at the front of the neck and the collar.

• Fashion & Textile Research Journal
• /
• v.10 no.4
• /
• pp.445-454
• /
• 2008

The existing baseline taping methods were not applicable sometimes according to the body shape of dress form and they were often dependent on the personal ability and knowledge of modelist. It is very important to suggest the standardized baseline taping method which is applicable to various dress forms which have different body size and shape. It helps to communicate about clothing design and patternmaking between designer and manufacturer, and it also makes students to understand draping easily. So this study was performed to suggest the standardized baseline taping method which is easier and has consistency of taping result regardless of body shape of dress form. First, the existing 7 baseline taping methods were compared with 3 kinds of dress form which are reflecting different body shape and different age. Especially the location of baselines and landmarks which are important for draping are analyzed. Second, the new baseline taping method was developed with reference to the existing baseline taping methods, the standard body measurements of 2004 Size Korea and flat patternmaking. The standardized method for 12 landmarks and 11 baseline was suggested. Third, the appraisal group has performed baseline taping with both the existing method and new method on 2 kinds of dress form. The new method was superior to the existing method in uniformity of taping results as well as the degree of difficulty of taping. Development of the standardized baseline taping method which is applicable to various dress forms would make draping easier and be useful for both apparel industry and academia.

• Journal of the Korea Furniture Society
• /
• v.22 no.3
• /
• pp.151-159
• /
• 2011

This study is to suggest versatile chair designs that are organically shaped to take individual orientation. This study intends to provide design method to ensure the face of the chair that contacts the body of its user is transformed flexibly to support the body. The movement of human body is not just a behavior but the ways and tools that reflexively express against external stimuli that are sensed and identified by the person. The versatile chair whose users' sitting position is fixed is made by covering the lump form with a piece of cloth ensuring that the content is firmly fixed and by placing the beads-woven wood fabric according to the shape. And then, it is covered with the external cover. The proposed versatile chair designs assume specific forms as follows: First, it is a versatile chair whose user's sitting position can fix. The organically-shaped form that can accept varying postures is made as a mass, which changes into different shapes when human body touches the form so that users can lie down or sit. Due to such transformation, body posture is determined and individual differences in shape changing are all acceptable. Second, it is a versatile chair that reflects the user's position in a fixed chair, where a cloth-wrapper feature is applied to the form a sifit wrapped postures so that a variety of body postures can be accepted. Finally, a versatile chair that reflects the user's position by changing the shape of is covered with forms so that it will be transformed and used in accordance with situations and chair shapes and reflect multiple shapes including round or square ones.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.21 no.8
• /
• pp.1334-1345
• /
• 1997

The purpose of this study were 1) to identify the effects of age and sex of Korean adolescents on the psychological variables(body attitudes, public/private self-consciousness, self-esteem), weight control practices, and clothing behaviors, and 2) to identify the relation- ships between psychological variables and weight control practices, and the effects of the variables on clothing behaviors in the adolescent' groups classified by sex and age. The results of this study were as follows: 1) Two factors of body attitudes were identified: Body-shape consciousness and Physical attractiveness. Four factors of clothing attitudes were identified: Clothing interest/dressing for others, Clothing exhibition, Dressing for self, and Psychological clothing-dependerlce. 2) There were significant effects of sex on all of the research variables. Age was found to have effects on Physical attractiveness, self-esteem, public/private self-consciousness, Clothing exhibition, and Psychological clothing- dependence. 3) In the relationships between psychological variables and weight control practices, Body-shape consciousness was negatively correlated with Physical attractiveness in all groups. Also, Body-shape consciousness had effects on weight control practice in all subject groups. 4) Public self-consciousness had direct/indirect effects on the Clothing interest/dressing for others in all subject groups. Private self-consciousness had direct/ indirect effects on dressing for self in high school boys and girls. Body-shape consciousness had indirect effects on Preference for up-to date style in male college students group, whereas weight control practices had effects on the Preference for up-to date style in female college students group. Self-esteem was found to have the effects on clothing behavior in college students groups. Among clothing attitude factors, Clothing exhibition had distinct effects on the Preference for up-to date style in all subject groups, and Clothing interest/dressing for others had effects on Clothing exhibition and Psychological clothing-dependence in high school boys and girs.

• Journal of Fashion Business
• /
• v.25 no.3
• /
• pp.144-158
• /
• 2021

The purpose of this study is to develop a bodice block suitable for women in their 20s with turtle neck syndrome. The problem of turtle neck syndrome body type was derived through the evaluation of bodice blocks. First, the length of the front bodice was longer and the length of the back bodice was shorter. Second, the front neck point, back neck point, and the shoulder line were not in place. Third, the side neck was pushed up. Fourth, the length of armhole was long and it floated. Fifth, the front hem was attached to the body and the back hem was away from the body. A finally developed pattern was designed by developing four test patterns to solve the problem that appeared in a selected bodice pattern, and a t-test was conducted to determine the difference in the appearance evaluation by virtual clothing between the two patterns, bodice block and the development pattern. According to the result, the fit was not good from the side body because the position of the side neck point was not in a place due to the characteristics of the body shape of turtle neck syndrome, but the problems of the anterior neck position, the position of the back neck point, the shoulder line position, and the armhole shape were improved in the developed pattern.