• 한국초전도ㆍ저온공학회논문지
• /
• 제18권3호
• /
• pp.21-24
• /
• 2016

Recently, production technique and property of the High-Temperature Superconductor (HTS) tape have been improved. Thus, the study on applying an HTS magnet to the high magnetic field application is rapidly increased. A Nuclear Magnetic Resonance (NMR) spectrometer requires high magnitude and homogeneous of central magnetic field. However, the HTS magnet has fabrication errors because shape of HTS is tape and HTS magnet is manufactured by winding HTS tape to the bobbin. The fabrication errors are winding error, bobbin diameter error, spacer thickness error and so on. The winding error occurs when HTS tape is departed from the arranged position on the bobbin. The bobbin diameter and spacer thickness error occur since the diameter of bobbin and spacer are inaccurate. These errors lead magnitude and homogeneity of central magnetic field to be different from its ideal design. The purpose of this paper is to investigate the effect of winding error, bobbin diameter error and spacer thickness error on the central field and field homogeneity of HTS magnet using the virtual NMR signals in MATLAB simulation.

• 한국압력기기공학회 논문집
• /
• 제7권4호
• /
• pp.19-25
• /
• 2011

Steam Generator(SG) tube is an important component of Nuclear Power Plant(NPP), which is the pressure boundary between the primary and secondary systems. The integrity of SG tube has been confirmed by the eddy current test every outage. The eddy current technique adopting bobbin probe is currently the primary technique for the steam generator tubing integrity assesment. The bobbin probe is one of the essential components which consist of the whole ECT examination system and provides us a decisive data for the evaluation of tube integrity. Until now, all of the ECT bobbin probes in Korea which is necessary to carry out inspection are imported from overseas. However, KHNP has recently developed the bobbin probe design technology and transferred it to domestic manufacturers to fabricate the probes. This study has been conducted to establish technical requirements applicable to the steam generator tube inspection using the bobbin probes fabricated by the domestic manufactures. The results have been compared with the results obtained by using foreign probe to identify the availability to the steam generator tube inspection. As a result, it is confirmed that the domestic bobbin probe is generally applicable to SG tube inspection in the NPPs.

• 동력기계공학회지
• /
• 제6권2호
• /
• pp.68-72
• /
• 2002

Design of experiment was applied to analyze the shrinkage characteristics of the bobbin molded by injection molding. Among lots of design and processing conditions, the thickness of a bobbin and cooling conditions of a mold were considered. The temperature difference between top and bottom parts of the bobbin was considered as the objective to minimize the shrinkage of a bobbin. Optimal thickness of a bobbin was 2.0mm at the part of body and 1.5mm at the part of wing, respectively. Optimal cooling conditions such as cooling time and coolant inlet temperature were 12 second and $12^{\circ}C$, respectively.

• 한국군사과학기술학회지
• /
• 제13권5호
• /
• pp.717-724
• /
• 2010

The initial trajectory of a spheroid configuration bobbin for precision guidance has been investigated by analyzing its aerodynamic load and six-degree-of-freedom motion. The effects of changes in the spheroidal head configuration, flow angle and lateral center-of-gravity offset are numerically studied using the commercial software "FLUENT". A wind tunnel test is also conducted to validate the numerical scheme and to examine effect of the Reynolds number on the flow around the bobbin. It is shown that the size of the separation bubble formed on the surface decreases significantly when the Reynolds number is varied between 110,000 and 140,000. At a zero flow angle, an oblate spheroidal head shows relatively moderate rotation while a prolate spheroidal head shows rapid rotation. The bobbin with a spherical head shape has little effect on the flow direction; however, the oblate bobbin is sensitive to the flow angle. The roll motion of the bobbin is greatly influenced by the lateral center-of-gravity offset and maximum dispersion is observed at half of the radius.

• 한국의류산업학회지
• /
• 제3권1호
• /
• pp.25-30
• /
• 2001

In order to investigate the influence of thread tension on the structure of lockstitch seam, stitch tightness and seam balance ratio are measured at various tensions of needle thread and bobbin thread. The structure of lockstitch was shown in terms of skeleton stitch models to obtain quantitative analysis of stitch tightness. The balanced seam formed to the rectangu1ar stitch model under low bobbin thread tension, but the fabric tightness produced by interlaced needle and bobbin thread under high bobbin thread tension. In this paper, new equation to obtain seam balance ratio was proposed for a lockstitch seam. By using the new equation, the seam balance ratio was not affected by the stitch density and fabric thickness. In order to form the balanced seam, the ratio on tension of needle thread and bobbin thread was about 6:1~7:1 in this experiment.

• 비파괴검사학회지
• /
• 제26권6호
• /
• pp.403-410
• /
• 2006

Eddy current testing (ECT) signals produced by a differential bobbin coil probe vary according to probe design parameters such as the number of turns, geometry and coil gap size. In the present study, the characteristics of a differential bobbin coil probe signals are investigated by numerical simulation in order to determine the optimum coil gap. For verification of numerical simulation accuracy, a specially designed bobbin probe of which the coil gap can be adjusted is fabricated and a series of experiments to acquire signals from two kinds of standard tubes with the variation in coil gap is performed. Then, the experimental signals are compared to the simulation results. Based on this investigation, a decision on the optimum range of coil gap is made. The theoretically predicted signals agree very well to the experimental signals. In fact, this excellent agreement demonstrates a high potential of the simulation as a design optimization tool for ECT bobbin probes.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.365-367
• /
• 2002

A parallelized topology optimization is applied to the design of a DVD-pickup bobbin, for which the design objective is to maximize the fundamental frequency within a given mass limit. Unlike the existing serial topology optimization, the present method can deal with a large number of design variables, and thus can yield practical and realistic results. The structural member-sizing filter is also employed to control the topological complexity of the optimized bobbin structure.

• 한국압력기기공학회 논문집
• /
• 제4권2호
• /
• pp.29-33
• /
• 2008

As the measures of nuclear power plant utilities and manufacturers to reduce the defects of tube expansion region during manufacturing steam generators, many types of NDEs(Non-Destructive Examinations) are conducted to inspect the expansion region. The expansion region of tube is subject to degrade because of stress concentration induced by tube expansion, sludge pile and high temperature. So the inspections for tube expansion region have been reinforced. Liquid penetrant test, helium leak test, Bobbin profile test and hydraulic test are performed to confirm the integrity of tube expanded by hydraulic expansion method. Liquid penetrant test and helium leak test are used to inspect seal weld region on tubesheet end part. Bobbin Profile test is used to inspect fully the expanded region of steam generator tube. Hydraulic test finally verifies the integrity of seal weld region on tubesheet end part.

• 비파괴검사학회지
• /
• 제27권2호
• /
• pp.89-96
• /
• 2007

원자력발전소 증기발생기 전열관의 건전성을 평가하기 위해서 계획예방정비 기간에 수행되는 와전류검사의 여러 가지 기법중에서 보빈 탐촉자 검사는 가장 기본적인 중요한 검사이다. 와전류 탐촉자는 검사 계통의 핵심적인 부분으로서 특정 절차서에 따라 평가가 이루어질 때 대상 시험체의 합부를 결정하는 자료를 제공하게 된다. 또한, 수집된 와전류신호의 품질은 사용되는 탐촉자의 설계특성, 기하학적 형태, 운전주파수에 따라 결정되고, 검사결과에 미치는 영향이 크기 때문에 와전류검사 탐촉자의 선정은 특히 중요하다. 본 연구에서는 국내 원전 증기발생기 전열관 검사를 위한 최적의 차동형 보빈탐촉자를 설계하였다. 또한 보빈탐촉자 시작품의 전기적 특성과 와전류신호 특성 평가를 수행하여 만족한 결과를 도출하였다.

• 비파괴검사학회지
• /
• 제32권1호
• /
• pp.64-70
• /
• 2012

국내 원자력발전소 증기발생기 전열관의 건전성을 평가하기 위해서 수행되는 와전류검사의 탐촉자는 주로 두가지 종류가 사용한다. 첫 번째 와전류탐촉자는 마모와 같은 체적성 결함을 검사하기 위해 사용되는 보빈탐촉자이다. 두 번째 와전류탐촉자는 균열과 같은 비체적성 결함을 검사하기 위한 회전형 탐촉자이다. 와전류탐촉자는 검사 계통의 핵심적인 부분으로서 특정 절차서에 따라 평가가 이루어질 때 대상 시험체의 합부를 결정하는 자료를 제공하게 된다. 또한, 수집된 와전류신호의 품질은 사용되는 탐촉자의 설계특성, 기하학적 형태, 운전주파수에 따라 결정되고, 검사 결과에 미치는 영향이 크기 때문에 와전류검사 탐촉자의 선정은 특히 중요하다. 본 연구에서는 차동형 보빈탐촉자의 코일 권선 수의 변화가 탐촉자의 전기적 특성에 미치는 영향을 분석하였다. 이 결과를 이용하여 원전 증기발생기 전열관 와전류검사 보빈탐촉자를 설계하였다. 연구 결과 코일 권선 수의 변화는 전열관 형상 및 재질에 따른 검사주파수 선정에 크게 영향이 미침을 알 수 있다. 따라서 본 연구 결과를 통하여 원전 증기발생기 전열관 와전류검사 보빈탐촉자의 설계시 더욱 정밀한 코일 권선 수 설정에 토대를 구축하였다.