• 한국작물학회지
• /
• 제60권4호
• /
• pp.504-509
• /
• 2015

본 연구는 예정지에서 재배한 녹비작물과 해가림자재가 인삼의 생육과 품질에 미치는 영향을 구명하기 위하여 실험하였던 바, 얻어진 결과를 요약하면 다음과 같다. 1. 흑2+청2(TBTBPN) 해가림에서의 인삼 엽폭은 호밀과 헤어리베치 재배구가 좋았고, 흑1+청3(TBOBPN) 재배구의 엽장은 보리와 헤어리베치 재배구가, 엽폭은 헤어리베치 재배구에서 생육이 좋았으며, 차광지(BPS) 재배에서 엽장은 보리와 보리+헤어리베치 재배구에서 생육이 좋았지만 경장은 다른 해가림자재에 비해 감소된 결과를 보였다. 2. 인삼 근중은 흑2+청2(TBTBPN) 해가림 처리는 호밀과 헤어리베치 재배구에서, 흑1청3(TBOBPN) 해가림에서는 호밀과 보리+헤어리베치 재배구에서 생육이 좋았지만, 차광지(BPS) 해가림에서는 녹비종류별 큰 차이는 없었다. 3. 뿌리썩음병 발생율은 흑2+청2 해가림 처리는 보리재배구가 10.2%로 높았으며, 흑1+청3 해가림처리는 헤어리베치 재배구에서 23.1%로 높았으나, 호밀재배구는 해가림 자재에 관계없이 뿌리썩음병 발생율이 가장 적었다. 4. 흑2청2 해가림 처리의 ginsenoside 함량은 호밀재배구가 가장 높았고, 흑1+청3 재배구에서는 보리재배구가 높았으며, 차광지 재배구는 호밀재배구가 높았다.

• 한국방사선학회논문지
• /
• 제8권5호
• /
• pp.261-264
• /
• 2014

본 연구에서 사용한 증감지 구성 물질은 $Gd_2O_2S:Tb^{3+}$이고 Spectrometer를 이용하여 관전압 증가에 따른 형광특성을 분석하였다. 관전압에 증가에 따른 방출 형광을 측정한 결과 청색, 녹색, 적색에 해당하는 형광을 확인하였고, 그 중에서 녹색 형광에 해당하는 $^5D_4-^7F_5$의 형광이 가장 강하게 나타났다. 또한 50 kVp와 120 kVp의 형광량을 비교한 결과 50 kVp의 형광량은 120 kVp의 9.56%에 해당하는 형광만 방출하는 것으로 나타났다. $Gd_2O_2S:Tb^{3+}$ 증감지를 이용한 X-선 촬영에서 100 kVp 이상의 높은 관전압을 사용 할 경우 필름에 도달하는 형광량과 강도가 급격히 증가하므로 적정농도의 영상을 획득하기위한 주의가 요구되어진다.

• 한국식물병리학회:학술대회논문집
• /
• 한국식물병리학회 2003년도 정기총회 및 추계학술발표회
• /
• pp.104.1-104
• /
• 2003

To screen for potential biocontrol agents against postharvest disease of garlics caused by Penicillium hirsutum, a total of 933 isolates (432 fungi and 501 bacteria) were isolated from the rhizoshere or rhizoplane of garlics. Among them, Pantoea agglomerans isolate 59-4 (Pa 59-4) was selected for a potential biocontrol agent by in vivo wounded garlic bulb assay, When the spore suspension (10$\^$5/ spores/$m\ell$) of Penicillium hirsutum was co-inoculated with spore or cell suspension of each fungal or bacterial isolate on wounded garlics, the isolate highly suppressed disease development. Soaking garlic bulbs in the suspension of Pa 59-4 significantly reduced garlic decay from p. hirsutum. However, Pa 59-4 did not inhibit the mycelial growth of P. hirsutum in dual-culture with P. hirsutum on Tryptic soy agar. In order to elucidate mode of action of Pa 59-4 nutrient competition between Pa 59-4 and P. hirsutum was investigated using tissue culture plates with cylinder inserts containing defusing membrane reported by Janisiewicz et al. The results showed that Pa 59-4 effectively suppressed spore germination and mycelial growth of blue mold in the low concentration (0.5％) of garlic juice, but did not suppress those of blue mold in the higher concentration (5％) of garlic juice. This result suggests that the mechanism in biocontrol of garlic blue mold by Pa 59-4 may involve in nutrient competition with P. hirsutum on garlic bulbs.

• 복식
• /
• 제32권
• /
• pp.31-43
• /
• 1997

The costumes on a royal ceremony and the changes thereafter during the Korea Empire(1897-1910) have been elucidated through the review on the paintings on Queen Myong-Hun's 70th birthday celebration and the prospectus of the ceremony. Queen Myong-Hyn wore ceremonial gown in deep blue with 51 embroidered phoenix on it. The deep blue color the royal color in the Korea Empire replaced former red color. Go-jong wore violet crown and ceremonial suit in gold color. Twenty one kinds of court dance were offered during the celebration ceremony. Costumes therein appear to have an order according to the role ofdancers. most female dancers(in 17 performances not else-where specified) wore a rather common cos-tume-flower cap outer silk garent in green hand veils in 5 colors silk skirt in red) embroidered silk belt in red and shoes in green. In Sun-you-ak two female lead dancers were red hat decorated with tiger whisker deep blue outer garment wide red belt silk boots in black bow and arrows on back and a sword and a whip in hands. In Choonaang-jon a fe-male solo dancer wore a silk outer garment in yellow silk skirt in red green lorum embroidered silk belt in red wrist band of gold embroidered red silk and 5 color hand veils. In Yon-wha-dae two young girl dancers wore lotus-form crown green outer garment wide pants in red silk red silk skirt red silk belt hand veils in jade color and silk shoes in deep red. In Moo-go 4 female dancers each wore long waist coat in blue red white and warm light green in addition to the above-mentioned common costume. In Gumkee-moo 4 female dancers wore hatlike wool helmet outer garment with narrow sleeve long silk waist coat in blue combat belt in deep blue silk and dance swords in both hands. In Youk-wha-dae 6 female dancers each wore a long waist cost in red deep blue violet pale pink green and jade color. Green color of outer garment in the above-mentioned common costume of female dancers appears intersting. Although the color was shown as yellow in the screen paintings actually it was green as evidenced by the prospectus of the celeebration ceremony.

• 신재생에너지
• /
• 제4권2호
• /
• pp.74-80
• /
• 2008

To improve the blue responses of screen-printed single crystalline silicon solar cells, we investigated an emitter etch-back technique to obtain high emitter sheet resistances, where the defective dead layer on the emitter surface was etched and became thinner as the etch-back time increased, resulting in the monotonous increase of short circuit current and open circuit voltage. We found that an optimal etch-back time should be determined to achieve the maximal performance enhancement because of fill factor decrease due to a series resistance increment mainly affected by contact and lateral resistance in this case. To elucidate the reason for the fill factor decrease, we studied the resistance analysis by potential mapping to determine the contact and the lateral series resistance. As a result, we found that the fill factor decrease was attributed to the relatively fast increase of contact resistance due to the dead layer thinning down with the lowest contact resistivity when the emitter was contacted with screen-printed silver electrode.

• 대한기계학회논문집A
• /
• 제26권11호
• /
• pp.2297-2304
• /
• 2002

Two-dimensional and three-dimensional finite element methods have been used to analyze the deformation behavior of a shadow mask due to thermal and tension load. The shadow mask inside the Braun tube of a TV set has numerous slits through which the electron beams are guided to land on the designed phosphor of red, green or blue. Its thermal deformation therefore causes landing shift of the electron beam and results in decolorization of a screen. For the realistic finite element analysis, the effective thermal conductivity and the effective elastic modulus arc calculated, and then the shadow mask is modeled as shell without slits. Next a transient thermal analysis of the shadow mask is performed, wherein thermal radiation is a major heat transfer mechanism. Analysis of the resulting thermal deformation is followed, from which the landing shift of the electron beam is obtained. The present finite element scheme may be efficiently used to reduce thermal deformation of a shadow mask and in developing prototypes of a large screen flat TV.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.390-393
• /
• 2008

To improve the blue responses of screen-printed single crystalline silicon solar cells, we investigated an emitter etch-back technique to obtain high emitter sheet resistances, where the defective dead layer on the emitter surface was etched and became thinner as the etch-back time increased, resulting in the monotonous increase of short circuit current and open circuit voltage. We found that an optimal etch-back time should be determined to achieve the maximal performance enhancement because of fill factor decrease due to a series resistance increment mainly affected by contact and lateral resistance in this case. To elucidate the reason for the fill factor decrease, we studied the resistance analysis by potential mapping to determine the contact and the lateral series resistance. As a result, we found that the fill factor decrease was attributed to the relatively fast increase of contact resistance due to the dead layer thinning down with the lowest contact resistivity when the emitter was contacted with screen-printed silver electrode.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.101-105
• /
• 2004

In this paper, theoretical basis of stereoscopic display is investigated and programmed to shaw the application which could be used in the Virtual Reality (VR), especially for ship design. Stereoscopic is based on the seperated view point of left and right eyes on the screen and making 3 dimensional image. There different stereoscopic methods such are red-blue, interlacing, side-by-side and above-below are imvestigated and implemente to shaw the simple ship model and inside of ship. To shaw the 3 dimensional view, OpenGL is used to make program by implementing the logic of stereoscopic. Simple models and ship design are implemented to survey the applicability of stereoscopic for ship design. The best way is to use two projectors to emit interlaced shape. It is expected to imply this technique in the VR application for ship design.

• 한국전기전자재료학회논문지
• /
• 제26권4호
• /
• pp.330-334
• /
• 2013

We developed a package of remote phosphor structure having blue LED chips and phosphors physically separated, and the characteristics were evaluated according to different classifications of phosphor coatings. Remote phosphor was produced by screen printing coating on glass substrate with phosphor content rated paste and heat treatment. After mounting Remote phosphor, which has been classified according to number of coatings, on top of blue LED chips, luminous flux, luminous efficacy, CCT and CRI were measured. The measurement results showed the most suitable characteristics of white LED package as a general light source when the content rate of phosphor in Remote phosphor was 80 wt.% with 3 layers of coatings and thickness over $12{\mu}m$.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제49권5호
• /
• pp.291-296
• /
• 2000

Recently large size color TV and computer monitor are very popular and a lot techniques are being developed to get a high quality picture on the screen through reducing the convergence error among the red, green and blue beams and achieving a high focusing. One of the techniques is considering the mutual effects of the components of the Brown tube. The magnetic deflection yoke, especially, stands immediately next to the electron gun and generates the leakage magnetic fields at the electron gun which affects the trajectories of the electron beams inside the gun. Hence a shield cup made of thin conducting plate is located at the end of electron gun in order to shield the leakage flux from the deflection yoke. Since the red, green and blue beams are placed unsymmetrically the shielding effects of the shield cup on the beams are not same and eddy current controller, made of thin conducting plate, is auxiliary placed inside the shield cup. In this paper a transient magnetic field analysis algorithm is developed using boundary element method, and applied to the analysis of the shielding effects of the eddy current controller of shield cup in an electron gun.