• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.46 no.4
• /
• pp.42-49
• /
• 2009

This paper proposes a driving current control method for a back light unit (BLU), consisting of red, green, and blue (RGB) light-emitting diodes (LEDs), whereby an RGB optical sensor is used to check the output color stimulus variation to enable a time-stable color stimulus for light emission by the RGB LED BLU. First, to obtain the present color stimulus information of the RGB LED BLU, an RGB to XYZ transform matrix is derived to enable CIEXYZ values to be calculated for the RGB LED BLU from the output values of an RGB optical sensor. The elements of the RGB to XYZ transform matrix are polynomial coefficients resulting from a polynomial regression. Next, to obtain the proper duty control values for the current supplied to the RGB LEDs, an XYZ to Duty transform matrix is derived to calculate the duty control values for the RGB LEDs from the target CIEXYZ values. The data used to derive the XYZ to Duty transform matrix are the CIEXYZ values for the RGB LED BLU estimated from the output values of the RGB optical sensor and corresponding duty control values applied to the RGB LEDs for the present, first preceding, and second preceding sequential check points. With every fixed-interval check of the color stimulus of the RGB LED BLU, the XYZ to Duty transform matrix changes adaptively according to the present lighting condition of the RGB LED BLU, thereby allowing the RGB LED BLU to emit the target color stimulus in a time-stable format regardless of changes in the lighting condition of the RGB LEDs.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.184-184
• /
• 2022

This study was aimed to evaluate the antioxidant activity and bioactive property of extracts from a purple-colored wheat variety 'Arriheuk' (Triticum aestivum L.) wheatgrass, affected by light emitting diode irradiation (LED). The wheatgrass was cultivated for 10 days after sowing in a growth chamber under the following LED conditions: R1B1 (Red:Blue = 1:1), R7B3 (Red:Blue = 7:3), and R3B7 (Red:Blue = 3:7). We examined antioxidant activity of the hot water extracts of wheatgrass using DPPH and ABTS free radicals scavenging assays. At the concentration of 10,000 ㎍/ml, the extract from R1B1 showed the highest DPPH free radical scavenging activity(79.29%), but its ABTS free radical scavenging activity was the lowest(32.0%). To evaluate bioactive property of the wheatgrass, we examined the change of natural killer (NK) cell activity affected by the wheatgrass extracts in vitro. At the concentration of 500㎍/ml, NK cell activity was most highly enhanced by the extract from R1B1(181.6%), and the activity was 176.1% (R7B3) and 144.6%(R3B7), respectively. These results suggest that the functional property of 'Arriheuk' wheatgrass would be enhanced by LED irradiation condition.

• Journal of Information Display
• /
• v.13 no.1
• /
• pp.37-42
• /
• 2012

An empirical functional form was suggested for the analysis of the emission spectrum of high-power light-emitting diode (LED) consisting of a sharp blue peak from the LED chips and a broad yellow peak from the phosphor layer. The peak positions, half widths, shape parameters, and amplitudes of these two peaks were reliably obtained as a function of the temperature, and the results were discussed qualitatively in relation with the junction temperature. The adoption of an inert liquid was found to have significantly reduced the LED temperature and the color shift of the emitted light. The phenomenological approach used in this study may be helpful in the simulation of the LED spectrum under various thermal conditions, and may thus be helpful in the improvement of the device performance.

• Journal of the Korean institute of surface engineering
• /
• v.40 no.2
• /
• pp.103-106
• /
• 2007

We have investigated the optical and electrical properties of surface mounted white light emitting diode (LED) chips prepared by using yellow phosphors on the blue LED chip. The yellow phosphor mixed with transparent epoxy was coated on the prepared LED chip. The optimum mixing conditions with epoxy and yellow phosphor is obtained at the mixing ratio of epoxy:yellow phosphor = 97:3 wt%. The maximum luminance and light emitting efficiency are above $80,000cd/m^2$ and 23.2 lm/W, respectively, at the bias voltage of 2.9 V. There was no distinct change in the luminance strength with changing of the yellow phosphor ratios. The current of the white LED chip is about 30 mA at 2.9 V.

• Korean Journal of Medicinal Crop Science
• /
• v.28 no.3
• /
• pp.200-208
• /
• 2020

Background: Salvia miltiorrhiza Bunge has been used in traditional medicine. The type of light source has an effect on the growth properties and composition of functional compounds in plants. In this study, we analyzed the effects of different artificial light sources on the growth characteristics as well as antioxidant and antimicrobial activities of S. miltiorrhiza. Methods and Results: Seedlings of S. miltiorrhiza were grown under various artificial light sources, including fluorescent light (FL), light emitting diode (LED), and microwave electrodeless light (MEL), for 8 weeks. Growth characteristics were the best in plants treated with MEL. DPPH scavenging activity of the shoot was more pronounced with the FL treatments, while the roots were more active in plants grown under single wavelength lights (i.e., blue and red LEDs). Among the different light source treatments, the blue LED resulted in a higher total phenolic content in the plants. Furthermore, growing plants growth under the red LED enhanced their total flavonoid content. Notably, the antimicrobial properties of plants varied significantly between light source treatments in this study. Except for E. coli, all the tested microorganisms were susceptible to the plant extracts. Conclusions: The type of light source may be an important parameter for the enhancement of plant growth and functional compounds in S. miltiorrhiza.

• Journal of Broadcast Engineering
• /
• v.21 no.5
• /
• pp.816-823
• /
• 2016

This paper studies a light emitting diode(LED) overlapping method of a head-up display that consists of a digital micro device(DMD) panel and a red, green, blue LED in order to increase the brightness of display system and optical output power. This optimization overlapping method removes a quantization noise which occur due to LED overlapping too excessive and stabilizes the junction temperature of LED. In order to reduce junction temperature of LED, the a correlation between a green duty and LED overlapping ratio is studied. Throughout this study, the brightness of head-up display exhibited high increasement ratio of luminance around 33.3 percent at 39 percent overlapping method.

• Journal of the Korean Chemical Society
• /
• v.47 no.4
• /
• pp.370-375
• /
• 2003

$BaMg_2Al_16O_27:Eu,\SrGa_2S_4:Eu$, and ZnCdS:Ag,Cl phosphors were chosen to produce blue, green, and red emissions, respectively, under excitation from a violet light emitting diode (LED). A four-band white LED was obtained by a combination of nonabsorbed violet emission from a violet LED and blue, green, and red emissions from $BaMg_2Al_16O_27:Eu,\SrGa_2S_4:Eu$, and ZnCdS:Ag,Cl phosphors. The luminescent properties of the four-band white LED were also discussed.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.13 no.4
• /
• pp.121-129
• /
• 2014

This study was carried out to develop an efficient plant growth system that can be controlled by altering the wavelength and illumination using a LED module. If it is possible to develop a system that can be controlled in this manner, utilizing different characteristics in the meaningful wavelength band depending on the growth time or type of plant, the plant growth conditions can be optimized. In order to this, red, green, blue and white LEDs are arrayed in a rectangle, consisting of LED modules which can be combined with each other. Consequently, the array can be used to select the optimal light conditions with monochromatic red, green, blue and white LEDs, or mixed LEDs, for plant growth. Experiments on the characteristics of the wavelengths to evaluate the efficiency of the plant growth system were performed. The usefulness of the system was demonstrated through a cultivation test involving several special plants.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.8
• /
• pp.24-30
• /
• 1998

A blue LED of $In_{x}Ga_{1-x}N$ multiple quantum well structure which had the blue emission spectrum of donor-acceptor pair transition generated form Si-Zn co-doped $In_{x}Ga_{1-x}N$ active layer, was fabricated. The $In_{x}Ga_{1-x}N$ MQW heterojunction LED structure was grown by MOCVD on the sapphire substrate with (0001) surface orientation at 800.deg. C. The fabricated LED exhibited forward cut-in voltage of 4~4.5V and reverse breakdown voltage of -13V. Its optical chracteristics showed that the center wavelength of peak emission occurred at 460nm and the optical intensity was increased linearly with respect to the injected electrical current above 5mA.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.11
• /
• pp.1020-1024
• /
• 2006

Europium$(Eu^{2+}\;or\;Eu^{3+})$-activated calcium aluminium silicate phosphors were synthesized for the first time and the structures and luminescence characteristics of these phosphors were investigated. The phosphors in this study emitted blue, green, and even red light depending on the starting milterials and annealing conditions for synthesis. In addition, the structure was also changed when the different starting materials were used. When $CaCO_3$ was used as a starting material, tetragonal $Ca_2Al_2SiO_7$ was formed. However, pure green light was emitted when the annealing was conducted in reduced atmosphere and red one was emitted by annealing in air. In the case of $CaSiO_3$ as a starting material, triclinic $CaAl_2Si_2O_8$ was formed and only pure blue emission was observed. Moreover, this blue phosphor exhibited higher intensity than that of commercial YAG:Ce phosphor, which showed the possibility of application on the phosphor for new light source such as a UV-LED.