• Bulletin of the Korean Chemical Society
• /
• v.29 no.10
• /
• pp.1960-1964
• /
• 2008

The roles of coordinating ligands (TOPO, OA, HDA, and TDPA) for the synthesis of ZnO nanoparticles are investigated. Various shapes (hexagonal cone, hexagonal plate, and rod) and sizes (5-100 nm) of ZnO nanoparticles are prepared in relation to the coordinating ligands. The hexagonal shapes ($\leq$ 100 nm) are synthesized with TOPO and OA, while smaller size nanorods (5 ${\times}$ 30 nm) are with TOPO and TDPA. The relative intensities of two distinctive emission bands centered at 385 and 500 nm, which are related to the exciton and defect states, respectively, depend on the crystal qualities of ZnO nanoparticles affected by the coordinating ligands. The intense UV emissions with the reduced visible emissions are found in the monodisperse nanoparticles such as hexagonal cones and nanorods, suggesting that the monodispersity as well as the crystallinity is closely related to the coordinating ligands. The blue-shift of photoluminescence and absorption edge is observed in the nanorods, because the sizes of the nanorods are in the quantum confinement regime.

• The Bulletin of The Korean Astronomical Society
• /
• v.39 no.2
• /
• pp.92.2-92.2
• /
• 2014

NGC 6822 is a dwarf irregular galaxy in the Local Group. Unlike clouds in the Large Magellanic Cloud and the Small Magellanic Cloud, molecular clouds in NGC 6822 are not influenced by the Galactic tidal force. Therefore the star forming processes are only dictated by local conditions. Hubble V is the brightest of the several bright H II region complexes in NGC 6822. The core of Hubble V, surrounded by a molecular cloud complex, contains compact clusters of bright blue stars. During the commissioning runs of the new high-resolution near-infrared spectrometer, IGRINS (Immersion GRating near-INfrared Spectrometer), we observed Hubble V and detected many emission lines from the H II regions and from the photodissociation region at the interface between the ionized gas and the molecular cloud. In this presentation, we report preliminary results of the IGRINS observations. We discuss the implications of the observed lines ratios and kinematics for our understanding of the evolution of star forming molecular clouds.

• The Bulletin of The Korean Astronomical Society
• /
• v.39 no.2
• /
• pp.49-49
• /
• 2014

Blue Compact Dwarf galaxies (BCDs) are low-mass galaxies with recently enhanced star formation activity. Since the discovery of old stellar population in the BCDs, a number of hypotheses have been suggested as the origin of the current active star formation. One theory is tidal interactions such as fly-by and merger. In this study we test this hypothesis using a pair of BCDs, ESO 435-IG20 and ESO 435-IG16 that are separate by only ~80 kpc in projection at a similar redshift (at a ~9 Mpc distance). In the HIPASS survey, intergalactic atomic hydrogen envelope has been found to be covering both galaxies, making the pair a good candidate for the case where the star formation has been triggered by tidal interaction. We probe the gas morphology and kinematics of the BCD pair using ATCA HI data in order to find the evidence of tidal interaction. We also estimate star formation rates in the pair based on Ha emission and UV continuum, and compare with other dwarf galaxies to investigate how responsible the tidal interaction is for the enhanced star formation in this case.

• Journal of the Korean Ceramic Society
• /
• v.41 no.5
• /
• pp.359-363
• /
• 2004

Photoluminescence excitation (PLE) spectroscopy studies were performed for anodically etched porous Zn, which exhibited a PL in the blue/violet spectral range peaking at 420 nm (2.95 eV), and oxidzed porous Zn at 380$^{\circ}C$ for 10 min and 12 h. A broad absorption band was observed at 4.07 eV (305 nm), 3.49 (355 nm) for anodically etched porous Zn. In contrast, both the oxidized porous Zn and sintered ZnO exhibited an almost identical one broad absorption band at 3.85 eV (322 nm), when PLE spectra were measured at 378 nm (3.28 eV). The oxidized porous Zn and sintered ZnO, which displayed both UV and green luminescence band, showed an additional absorption band at 389 nm (3.19 eV) and 467 nm (2.66 eV). In contrast, no significant absorption band was detected for a 10-min oxidized porous Zn, which only displayed one UV luminescence void of deep-level luminescence. These absorption bands determined by PLE studies enabled a clear understanding of an emission mechanism for the UV and green luminescence from ZnO.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.05b
• /
• pp.331-334
• /
• 2000

The organic electroluminescent(EL) device has gathered much interest because of its large potential in materials and simple device fabrication. We fabricated EL devices which have a blended single emitting layer containg poly(Nvinylcarbazole)[PVK] and poly(3-dodecylthiophene)[P3DoDT]. The molar ratio between P3DoDT and PVK changed with 1:0, 2:1 and 1:1. To improve the external quantum efficiency of EL devices, we applied insulating layer, LiF layer between polymer emitting layer and AI electrode. All of the devices emit orange-red light and it's can be explained that the energy transfer occurs from PVK to P3DoDT. Within the molar ratio 1:0, 2:1 and 1:1, the energy transfer was not saturated, which results in the not appearance of PVK emission in the blue region. In the voltage-current and voltage-light power characteristics of devices applied LiF layer, current and light power drastically increased with increasing with applied voltage. In the consequence of the result, the light power of the device have a molar ratio 1:1 with LiF layer was about 10 times larger than that of the device without PVK at 6V.

• BMB Reports
• /
• v.40 no.6
• /
• pp.1090-1094
• /
• 2007

Melittin (ME), a linear 26-residue non-cell-selective antimicrobial peptide, displays strong lytic activity against bacterial and human red blood cells. To design ME analogue with improved cell selectivity, we synthesized a melittin diastereomer (ME-D) with D-amino acid in the leucine zipper sequence (Leu-6, Lue-13 and Ile-20). Compared to ME, ME-D exhibited the same or 2-fold higher antibacterial activity but 8-fold less hemolytic activity. Circular dichroism analysis revealed that ME-D has much less $\alpha$-helical content in $\alpha$-helical content in the presence of zwitterionic EYPC/cholesterol (10 : 1, w/w) liposomes compared to negatively charged EYPE/EYPG (7 : 3, w/w) liposomes. The blue shift of the fluorescence emission maximum of ME-D in zwitterionic EYPC/cholesterol (10 : 1, w/w) liposomes was much smaller than in negatively charged EYPE/EYPG (7 : 3, w/w) liposomes. These results suggested that the improvement in therapeutic index/cell selectivity of ME-D is correlated with its less permeability to zwitterionic membranes.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2002.09a
• /
• pp.464-467
• /
• 2002

We propose the use of visible scintillation light for monitoring the X-ray CT in the gantry of a diagnostic CT for its performance test and maintenance works. We placed a disk of bare plastic scintillator disk in the gantry opening area of a helical X-ray CT. When we operated the CT, we could observe the emission of blue scintillation light from the scintillator in a dark room. Visible light was identified under all scanning conditions of diagnostic uses. As a result, we observed the direction and the spread of the incident X-ray in the scintillator. We also observed the change of the part of the scintillator where visible light was generated, and the move that took place associating with the rotation of the X-ray tube during one CT scan. On the basis of the observation, we examined the usefulness of the visible scintillation light as a convenient performance-evaluating tool as well as a maintenance tool of the CT.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.12
• /
• pp.3601-3608
• /
• 2014

RGB light emitting ZnSe based nanocrystals: ZnSe (blue), ZnSe:Cu (green) and ZnSe:Mn (red) were synthesized by capping the surface of the nanocrystals with oleic acid. The obtained nanocrystal powders were characterized by using XRD, HR-TEM, ICP-AES, FT-IR, and FT-Raman spectroscopies. The optical properties were also measured by UV/Vis and photoluminescence (PL) spectroscopies. The PL spectra showed broad emission peaks at 471 nm (ZnSe), 530 nm (ZnSe:Cu) and 665 nm (ZnSe:Mn), with relative PL efficiencies in the range of 0.7% to 5.1% compared to a reference organic dye standard. The measured average particle sizes from the HR-TEM images for those three nanocrystals were 4.5 nm on average, which were also supported well by the Debye-Scherrer calculations. The elemental compositions of the ZnSe based nanocrystals were determined by ICP-AES analyses. Finally, the drawn CIE diagram showed the color coordinates of (0.15, 0.16) for ZnSe, (0.22, 0.57) for ZnSe:Cu, and (0.62, 0.35) for ZnSe:Mn respectively, which were fairly well matched to that of the RGB color standards.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.6 no.2
• /
• pp.79-86
• /
• 2006

N-polar, Ga-polar, and non-polar GaN was grown by MBE and MOVPE using various substrates and influence of polarity has been investigated. The GaN growth by MOVPE is along cplane (0001), c-plane (0001), and a-plane (11-20) direction on c-plane (0001), a-plane (11-20) and r-plane (1-102) sapphire substrate respectively. The polarity of the film has a strong influence on the morphology and the optical properties of PA-MBE grown As-doped GaN layers. Strong blue emission from As-doped GaN was observed only in the case of N-polarity (000-1) layers, which was attributed to the highest concentration of Ga dangling bonds for this polarity of a GaN surface.

• Transactions on Electrical and Electronic Materials
• /
• v.9 no.1
• /
• pp.1-5
• /
• 2008

ZnS is an attractive material for future optical and electrical devices since it has a direct and wide band gap to provide blue emission at room temperature. In this study, inductively coupled $BCl_3/Ar$ plasma was used to etch ZnS:Mn thin films. The maximum etch rate of 164.2 nm/min for ZnS:Mn was obtained at a $BCl_3(20)/Ar(80)$ gas mixing ratio, an rf power of 700 W, a dc bias voltage of -200V, a total gas flow of 20 sccm, and a chamber pressure of 1Pa. The etch behaviors of ZnS:Mn thin films under various plasma parameters showed that the ZnS:Mn were effectively removed by the chemically assisted physical etching mechanism. The surface reaction of the ZnS:Mn thin films was investigated by X-ray photoelectron spectroscopy. The XPS analysis revealed that Mn had detected on the surface ZnS:Mn etched in $BCl_3/Ar$ plasma.