• Proceedings of the Korea Water Resources Association Conference
• /
• 한국수자원학회 2009년도 학술발표회 초록집
• /
• pp.2078-2082
• /
• 2009

Riparian vegetation distribution patterns and diversity relative to various fluvial geomorphic channel patterns, stream bank stabilization methods, and stream flow processes are described and interpreted for selected stream of Goesan, Central Korea. Idong Stream Pilot Project, which began in May 2003 and finished in December 2003, was selected to develop effective methods. The project aim to maintain or increase stream bank stabilization ecosystem goods and services while protecting downstream and stream bank ecosystem. A number of protecting methods which are a Flight of fieldstone, Vegetation block, Green river block, Stone net, Green environment block, Eco friendly cobble, Vegetation mat and Geo green cell and Firefly block were applied on the bank of Idong stream. The stream sites have been monitored about flora conditions each method in 2007. We selected 12 points for summer seasons to separately investigate in left bank, right bank and river bed. The main purpose of this study was to find out suitable methods and to improve stream restoration techniques for ecosystem. On the stream bank, Eco friendly cobble method(9.57) was the highest average of vegetation cover and Firefly block method(3.87) was the lowest average in applied methods.

• Journal of the Korean Society of Clothing and Textiles
• /
• 제30권1호
• /
• pp.157-166
• /
• 2006

The human body, which is composed of concave and convex curvatures, makes it difficult to transfer into 2D patterns directly from 3D data. In previous studies. Jeong, et al.(2004) suggested the block method was fester and easier when dealing with the triangular patches of male's upper dress form. Although the block method is useful to make a pattern, the information(area, length, etc.) from a 2D pattern would be different depending on the direction of the block method. As a result horizontal and diagonal block methods were suggested as optimal methods for 2D tight-fitting patterns. These block methods were closer to the original area of the 3D scan data than the vertical block method. The total area of the 2D pattern obtained by the horizontal and diagonal block methods showed little differences. In case of the horizontal and diagonal block methods, the total error of the 2D pattern area ranged from $0.01\%\~0.25\%$. In comparing the length of the 2D pattern with that of the 3D scan data, the obtained 2D pattern was $0.1\~0.2cm$ shorter than the 3D scan data, which was within the acceptable range of errors in making clothes. 3D space distribution images between the body surface and the experimental clothing were also measured and $3\%$ enlargement of the original pattern was verified as the adequate adjustment.

• The Journal of the Korea Contents Association
• /
• 제3권2호
• /
• pp.11-18
• /
• 2003

In this paper, we propose a fast variable block matching algorithm for motion estimation based on bit-patterns. Motion estimation in the proposed algorithm is peformed after the representation of image sequence is transformed 8-bit pixel values into 1-bit ones by the mean pixel value of search block, which brings a short searching time by reducing the computational complexity. Moreover, adaptive searching methods according to the motion information of the block make the procedure of motion estimation efficient by eliminating unnecessary searching processes of low motion block and deepening a searching procedure in high motion block. Experimental results show that the proposed algorithm provides bettor performance - average 0.5dB PSNR improvement and about 99% savings in the number of operations - than full search Hock matching algorithm with a fixed block size.

• Journal of Fashion Business
• /
• 제20권5호
• /
• pp.45-59
• /
• 2016

This research is a study to develop basic block patterns for adult males. The subjects were 20 men in their 20s, and we tested 6 basic bodice blocks that are used in academia and industry. First, a comparative analysis of the patterns of the bodice blocks was conducted and the test garments were made, and then their appearances were evaluated during wearing tests. Based on the test results, we intended to select a bodice block that is a good fit when it is put on and to use it as basic data in order to design a man's bodice block for the future. The research results are as follows: First, a comparison of the 6 bodice block drafts showed that they used differently calculated ease allowances at chest circumference and width, waist circumference, shoulder length, etc. for which the upper chest circumference is used as a reference. Second, when the appearances of the test garments were tested, the average scores were high in the order of B> H> P> K> M> L. Pattern B was superior in the areas of the neck circumference and shape, ease allowance at the back of the neck, circumference of the front of the neck, location of side width, ease allowance at sides, armhole width and depth. But in the other test items, there were cases where other patterns were superior.

• Journal of Korea Multimedia Society
• /
• 제20권10호
• /
• pp.1655-1661
• /
• 2017

A high-speed directional interpolation algorithm based on the pattern of a $2{\times}2$ pixel block is proposed in this paper. The basic concept of the proposed algorithm is started from UDWT(un-decimated discrete wavelet transform), but there are no transform operations. In order to detect the direction of the edge, 4-pixel differences of two pairs in the $2{\times}2$ block are compared. The $2{\times}2$ block patterns are grouped into total 8 classes, and thereafter the directional interpolation is executed according to the type of the pattern. Since the calculation of the proposed algorithm is very simple and needs a few additions on integer data type, the computation time is almost same as that of bilinear interpolation algorithm. However, experimental results show that the output quality of the proposed one is better than those of the conventional interpolation ones in the objective quality and the computation time.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제5권2호
• /
• pp.457-476
• /
• 2011

This paper presents an improved XOR-based Data Hiding Scheme (XDHS) to hide a halftone image in more than two halftone stego images. The hamming weight and hamming distance is a very important parameter affecting the quality of a halftone image. For this reason, we proposed a method that involves minimizing the hamming weights and hamming distances between the stego image and cover image in $2{\times}2$-pixel grids. Moreover, our XDHS adopts a block-wise operation to improve the quality of a halftone image and stego images. Furthermore, our scheme improves security by using a block-wise operation with A-patterns and B-patterns. Our XDHS method achieves a high quality with good security compared to the prior arts. An experiment verified the superiority of our XDHS compared with previous methods.

• Journal of the Korean Society of Clothing and Textiles
• /
• 제33권2호
• /
• pp.187-199
• /
• 2009

Recently, the quality and design of the children's wear is being improved remarkably. Following the trend, the need for the research on the pattern making of children's wear is growing. At first, we tried to find out how the industry is doing the pattern making job through interview. Results are as follows. The target age ranges from 5 to 11 years old. For the sample size of pattern making, 7 years of age is preferred. It is not usual to develop the design pattern from the bodice block pattern. Instead, they use middle block pattern for each item, such as blouse, shirt, pants, skirt or jacket. Starting from these middle block pattern, they prepare individual designs. With the results, the aim of the research became to develop one of most frequently used middle block pattern. The blouse block pattern was selected for that purpose. To look into the existing patterns, we selected 4 methods, i.e. NM-method, T-method, O-method, E-methods. Theses patterns were compared through wearing test for the evaluation of comfort and fit using trial garments. The results indicated the NM-method was best among them. Specially waist line position, shoulder shape and size allowance was adequate. Alteration and adjustment of pattern draft was made onto the NM-method. Allowances for the bust circumference, across chest, across back and depth of arm was adjusted for better comfort as well as fine fit. Sidelines of the bodice and the underarm seam of the sleeves were curved for styling. After another wearing test, the final pattern was suggested as a blouse block pattern for 7 years old girl.

• Journal of Fashion Business
• /
• 제10권1호
• /
• pp.41-57
• /
• 2006

The purpose of this study were to provide dress forms and men's jacket blocks based on the analysis of their somatotype. As the result of the previous research, based on 1290 males of 20 to 54 year-old, the shapes of adult male were 20 and each body shape was classified by size factor, height and chest girth and master size was selected considering appearance frequency. Somatotype YS(master size: height 170cm, chest girth 91cm) and HD1(master size: height 170cm, chest girth 94cm) were selected to develop dress forms and men's jacket block in the study. The procedure and results were follows; 1. The dress forms of somatotype YS and HD1 were provide base on means of 61 body measurements and cross sections of shoulder, chest, waist, hip of subjects belong to each somatotype. 2. New men's jacket blocks of somatotype YS and HD1 were developed based on the body surface extracted by draping and the result of comparative investigation on the conventional jacket patterns by wearing test. Also the drafting methods of new men's jacket blocks were provided. 3. Wearing test by the sensory evaluation showed that the developed jacket blocks were estimated more highly than existing patterns.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 한국재료학회 2011년도 춘계학술발표대회
• /
• pp.6.1-6.1
• /
• 2011

Nanoscale block copolymer (BCP) patterns have been pursued for applications in sub-30 nm nanolithography. BCP self-assembly processing is scalable and low cost, and is well-suited for integration with existing semiconductor fabrication techniques. However, one of the major technical challenges for BCP self-assembly is limited tunability in pattern geometry, dimension, and functionality. We suggest methods for extending the degree of tunability by choosing highly incompatible polymer blocks and utilizing solvent vapor treatment techniques. Siloxane BCPs have been developed as self-assembling resists due to many advantages such as high etch-selectivity, good etch-resistance, long-range ordering, and reduced line-edge roughness. The large incompatibility leads to extensive degree of pattern tunability since the effective volume fraction can be easily manipulated by solvent-based treatment techniques. Thus, control of the microdomain size, periodicity, and morphology is possible by changing the vapor pressure and the mixing ratio of selective solvents. This allows a range of different pattern geometry such as dots, lines and holes and critical dimension simply by changing the processing conditions of a given block copolymer without changing a polymer chain length. We demonstrate highly extensive tunability (critical dimension ~6~30 nm) of self-assembled patterns prepared by a siloxane BCP with extreme incompatibility.

• Journal of Korean Association for Spatial Structures
• /
• 제6권2호
• /
• pp.93-105
• /
• 2006

In order to investigate the effect of the height of application point of lateral loads and reinforcing steel bars in walls and columns in improving the seismic behavior of confined concrete block masonry walls, an experimental research program is conducted. A total of twelve one-half scale specimens are tested under repeated lateral loads. Specimens are tested to failure with increasing maximum lateral drifts while a vertical axial load was applied and maintained constant. The specimens adopted are two-dimensional (2D) hollow concrete block masonry walls with different parameters such as shear span ratio, inflection point and percent of reinforcement in confining columns and walls. Test results obtained for each specimen include cracking patterns, load-deflection curve, and strains in reinforcement and walls in critical locations. Analysis of test data showed that above parameters generate a considerable effect on the seismic performance of confined concrete block masonry walls.