• Nuclear Engineering and Technology
• /
• v.45 no.4
• /
• pp.489-504
• /
• 2013

Software safety for nuclear reactor protection systems (RPSs) is the most important requirement for the obtainment of permission for operation and export from government authorities, which is why it should be managed with well-experienced software development processes. The RPS software is typically modeled with function block diagrams (FBDs) in the design phase, and then mechanically translated into C programs in the implementation phase, which is finally compiled into executable machine codes and loaded on RPS hardware - PLC (Programmable Logic Controller). Whereas C Compilers are fully-verified COTS (Commercial Off-The-Shelf) software, translators from FBDs to C programs are provided by PLC vendors. Long-term experience, experiments and simulations have validated their correctness and function safety. This paper proposes a behavior-preserving translation from FBD design to C implementation for RPS software. It includes two sets of translation algorithms and rules as well as a prototype translator. We used an example of RPS software in a Korean nuclear power plant to demonstrate the correctness and effectiveness of the proposed translation.

• Journal of the Korean Geosynthetics Society
• /
• v.8 no.3
• /
• pp.45-52
• /
• 2009

The use of geogrid-reinforced earth wall technologies has progressed rapidly over the past 10 years in Korea because these technologies have advantages such as economical efficiency, graceful appearance, and easy construction. The geogrid used in the reinforced earth wall with concrete block facing can be subjected to damage among the upper and lower blocks and at the interface between the block and the geogrid. Therefore, when design of the geogrid-reinforced soil walls the required connection strength of the geogrid to the wall facing is an issue. In this study, new connection system between facing block and geogrid is developed to improve the damages of geogrid in the existing connection systems. The new connection devices are made of steel and have I-shape. This paper describes the test method and results of the laboratory testing for determination of connection strength in connection system using the I-type connection device.

• Asian-Australasian Journal of Animal Sciences
• /
• v.6 no.3
• /
• pp.377-381
• /
• 1993

Twenty male crossbred ($Sahiwal{\times}HF$) calves of about 6-9 months of age were divided into four groups of five animals each. All the animals were offered wheat straw ad lib. As the basal feed. However, animals in group I were fed concentrate mixture while the animals in groups II, III and IV had free access to urea molasses mineral block (UMMB) lick (I), (II) and (III) respectively as a partial substitute of concentrate mixture. The average concentrate offered (kg/day) to the animals was significantly (p<0.01) higher in group I ($2.69{\pm}0.18$) compared to groups II ($1.76{\pm}0.15$), III ($1.70{\pm}0.06$) and IV ($1.65{\pm}0.12$). The UMMB lick consumed was non-significantly different amongst groups I ($535.40{\pm}38.14$), II ($525.60{\pm}31.82$), III ($551.00{\pm}38.49$) and IV ($548.80{\pm}45.46$). Except ether extract, the digestibility coefficients of CP, ADF and NDF were non-significantly different in different groups. Similarly, N balance (g/day) and percent N retention of intake was not affected in different groups on supplementation of UMMB lick. Body composition of animals was similar in different groups supplemented with either concentrate mixture or concentrate mixture and UMMB licks. It may be concluded from these studies that UMMB lick can partially replace the concentrate mixture in the diet of growing calves without affecting the growth rate, nutrient utilization and body composition. The UMMB lick, thus, can form a part of the ration economically in the diet of growing ruminants especially in developing countries.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.5
• /
• pp.18-24
• /
• 2011

In multibit Sigma-Delta Modulator, one of the DEM(Dynamic Element Matching) techniques which is DWA(Data Weighted Averaging) is widely used to get rid of non-linearity caused by mismatching of capacitor that is unit element of feedback DAC. In this paper, by adjusting clock timing used in existing DWA architecture, 2n Register block used for output was replaced with 2n S-R latch block. As a result of this, MOS Tr. can be reduced and extra clock can also be removed. Moreover, two n-bit Register block used to delay n-bit data code is decreased to one n-bit Register. After designing the 3rd 3-bit SC(Switched Capacitor) Sigma-Delta Modulator by using the proposed DWA architecture, 0.1% of mismatching into unit element in input frequency 20 kHz and sampling frequency 2.56 MHz. As a consequence of the simulation, It was able to get the same resolution as the existing architecture and was able to reduce the number of MOS Tr. by 222.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.10 s.101
• /
• pp.1043-1049
• /
• 2005

In OFDM system suitable for high capacity high speed broadband transmission, ICI caused by phase noise degrades system performance seriously by destroying the orthogonality among subcarriers. In this paper, a new STFBC method combining ICI self cancellation scheme and antenna, time, frequency diversity is studied to reduce ICI effectively. CPE and ICI are analyzed by the phase noise linear approximation method in the proposed STFBC OFDM system. CIR, PICR and BER are discussed to compare the system performance degraded by phase noise of PLL. As results, STFBC method significantly reduces ICI. Furthermore, the SCI that usually happens in the traditional STBC, SFBC diversity coding method can be easily avoided.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.1
• /
• pp.22-32
• /
• 2011

In this paper, we first analyze the differences of underwater acoustic (UWA) orthogonal frequency division multiplexing (OFDM) systems and conventional terrestrial OFDM system, and give a simple introduction of the backgrounds. By considering the real UWA channel environments, the measured channel data is used to generate the UWA channel model and calculate the relative parameters for underwater OFDM systems. Practical least square (LS) based channel estimation with linear interpolation are adopted to obtain the channel state information (CSI) at receiver side. As multi-input multi-output (MIMO) processing techniques, Alamouti code is implemented and evaluated to perform for space time block coding (STBC) and space frequency block coding (SFBC) for UWA OFDM systems with the MIMO configuration of $2{\times}1$, at the same time, $1{\times}2$ maximum ratio combining (MRC) is performed for the purpose of comparison. The simulation results show that, with perfect channel estimation, SFBC failed to work duo to the serious frequency selectivity of UWA channel environments. When the practical channel estimation is applied, in the case of STBC, the proposed 4-column pilot pattern gives better performance about 7dB than SISO system.

• Journal of Convergence Society for SMB
• /
• v.6 no.3
• /
• pp.21-27
• /
• 2016

In this paper, we introduce the PB/MC-CDMA (Partial Block/Multi-Carrier-Code Division Multiple Access) system to mitigate inter-cell interference (ICI) and enhance user capacity in the small cell environment. In 5G mobile communications, the number of devices connected to the network is expected to increase exponentially with the expansion of the IoT (Internet of Things) services. In addition, each device is expected to be required by the various data rates by their content types. In LTE/LTE-A, there are some limitations that large scale connectivity and supporting various data rates. Therefore, we introduce a PB/MC-CDMA physical layer system which is suitable for the small cell environment, and evaluate the performance in the multi cell environment which is affected by ICI. Through computer simulation results, we demonstrate the effectiveness of PB/MC-CDMA for the small cell environment.

• The Journal of the Acoustical Society of Korea
• /
• v.15 no.2E
• /
• pp.85-91
• /
• 1996

New very low bit rate segmentation video image coding technique is proposed by segmenting image into textually homogeneous regions. Regions are classified into one of three perceptually distinct texture classes(perceived constant intensity, smooth texture, and rough texture) using the Human Visual System(HVS) and the fractals. To design very low bit rate video image coder, it is very important to determine the best block size for estimation the fractal dimension and the thresholding of the fractal dimension for each texture class. Good quality reconstructed images are obtained with about 0.10 to 0.21 bit per pixel(bpp) for many different types of imagery.

• Journal of Astronomy and Space Sciences
• /
• v.26 no.3
• /
• pp.345-354
• /
• 2009

A stepped septum polarizer has been designed and fabricated for the 43 GHz band KVN receiver system. The dual-circular polarizer converts left and right hand circularly polarized signals into linear polarizations in two separated rectangular waveguides. Measurements show that the performance of the designed septum polarizer covering 42-48 GHz frequency band is adequate to meet the requirement of KVN receivers. Especially, a polarizer for the KVN receiver of 85-95 GHz frequency band can be fabricated by scaling the dimensions of the septum polarizer developed in this paper.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.95-96
• /
• 2006

Surface modification of clay minerals has become increasingly important for improving the practical applications of clays such as polymeric nanocomposites. We used the copolymer as modifiers having phenyl components, and successfully developed a route for the preparation of amine functionalized polymer based on oligostyrene and its block copolymers. The oligo(St-co-VBC)s with controlled molecular weight were synthesized via nitroxide mediated polymerization method. We also successfully prepared organophilic layered silicates whose surface is covered with styrenic copolymers. Through the analysis of chemical structure and morphology, we concluded that copolymers were very effective organic modifiers to change the surface characteristics of layered silicates.