• Journal of IKEEE
• /
• v.6 no.2 s.11
• /
• pp.152-160
• /
• 2002

This paper is the realization of the face recognition system for multimedia application. This system is focused on the design concerning the improvement of recognition rate and the reduction of processing time for face recognition. The non-modificated application of typical RGB color system enables the reduction of time required for color system transform. The neural network and the application of algorithm using face characteristic improves the recognition rate. After mosaicking an image, a face-color block has been selected through the color analysis of mosaic block. The characteristic of the face removes the mis-checked face-color candidate block. Finally, from the face color block, four special values are obtained. These values are processed to the neural network using the back propagation algorithm. The output values are the touchstone to decide the genuineness of face field. The realized system showed 90% of face recognition rate with less than 0.1 second of processing time. This result can be understood as sufficient processing time and recognition rate to find out the face block for multimedia application in dynamic image.

• Journal of Ocean Engineering and Technology
• /
• v.18 no.3
• /
• pp.26-31
• /
• 2004

This paper presents a process planning system that will generate and verify assembly sequences of block assemblies. It consists of a CAD interface system and an assembly sequence planning system. In developing this system, we used an open architecture CAD kernel for the CAD interface system, for visualizing the CAD model and the assembly sequences, and an expert system shell for the assembly sequence planning system. This paper also proposes a framework for the integration of all the steps required to automate the procedures, from design to production. The process planning system is demonstrated by a simple example.

• Journal of information and communication convergence engineering
• /
• v.4 no.4
• /
• pp.131-135
• /
• 2006

In this paper, we discusses that the theoretical analysis is made for the performance of FS MC-CDMA by the aid of the Nakagami fading channels and the block error probabilities of the FS MC-CDMA in Nakagami fading channel are presented. The channel fading speed, slow or fast, is considered in evaluating block error probabilities. The effectiveness of diversity combining in improving block error performance is examined.

• Proceedings of the IEEK Conference
• /
• 2003.07d
• /
• pp.1347-1350
• /
• 2003

본 논문에서는 instruction과 data cache로 나누어지는 L1 cache를 가진 시스템에서 instruction과 data cache 각각의 block 크기 변화가 전체 시스템의 성능에 미치는 영향을 고찰하였다. 이를 위하여 SPEC CPU 벤치마크 프로그램을 입력으로 하는 SimpleScalar를 이용한 시뮬레이션을 수행하였다. 본 연구를 통해서, instruction과 data 각각의 특성에 맞는 cache block 크기를 사용하는 것이 일률적인 cache block 크기를 사용하는 것에 비하여 전체 시스템의 성능을 더욱 향상시켜 준다는 것을 보여준다.

• ETRI Journal
• /
• v.4 no.3
• /
• pp.18-29
• /
• 1982

In a block adaptive filtering procedure, the filter coefficients are adjusted once per each output block while maintaining performance comparable to that of widely used LMS adaptive filtering in which the filter coefficients are adjusted once per each output data sample. An efficient implementation of block adaptive filter is possible by means of discrete transform technique which has cyclic convolution property and fast algorithms. In this paper, the block adaptive filtering using Fermat Number Transform (FNT) is investigated to exploit the computational efficiency and less quantization effect on the performance compared with finite precision FFT realization. And this has been verified by computer simulation for several applications including adaptive channel equalizer and system identification.

• Journal of Technologic Dentistry
• /
• v.40 no.3
• /
• pp.125-131
• /
• 2018

Purpose: Automatic dental prosthesis manufacturing process was accelerated by the spread of dental CAD / CAM system. The CAD / CAM system with milling alloys were needed supplement. So, sintered alloy blocks were introduced. In this study, we want to study sintered alloy block. And to evaluate the alloy block manufacture and alloy properties. Methods: The alloy powders were prepared by high pressure water dispersion method. The sintered alloy blocks were prepared by low temperature pressing method. Their components observation were EDX, and the alloy structure was observed by XRD. Results: Co-Cr alloy powders were observed to have a circle shape with an average diameter of about $100{\mu}m$ and a Ni-Cr alloy powder had a circle shape with an average diameter of about $50{\mu}m$. The Co-Cr alloy block is composed of Co (34.62 wt%), Cr (17.33 wt%), Mo (2.98 wt%), Si (0.36 wt%) and C (44.17 wt%). The Ni-Cr alloy powder was composed of Ni (40.29 wt%), Cr (19.37 wt%), Mo (3.53 wt%), Si (0.52 wt%) and C (33.18 wt%). The peak of the Co and CoCr peaks were observed in the CoCr alloy body by the means of XRD study. Cr2Ni3 of the peak was observed in the Ni-Cr alloy material. Conclusion : As a result, the following conclusions were obtained. 1. Prepared by high-pressure water-law Co-Cr alloy powder has an average diameter $100{\mu}m$, Ni-Cr alloy powder was found to have the form of sphere having an average diameter $50{\mu}m$. 2. Co-Cr alloy and Ni-Cr alloy block produced by low-temperature processing showed a certain ratio. 3. In the XRD study, Co phase appeared in Co-Cr alloy block after sintering. and Cr2Ni3 phase appeared in Ni-Cr alloy block after sintering.

• The Journal of Information Systems
• /
• v.29 no.1
• /
• pp.93-111
• /
• 2020

Purpose The purpose of this paper is to observe the relative priorities of importances among the modified versions of Block chain system, being based on AHP decision support model which should be also proposed in this paper. Design/methodology/approach Four versions modified from the beginning of Block chain were divided into Public& Permissionless, Private&Permissionless, Public&Permissioned and Private&Permissioned types. Five criteria for evaluating the four versions whether the version were suitable for Medical information system were introduced from five factors of Technologies Accept Model, which were Security, Availability, Variety, Reliability and Economical efficiency. We designed Decision support model based on AHP which would select the best alternative version suitable for introducing the Block chain technology into the medical information systems. We established the objective of the AHP model into finding the best choice among the four modified versions. First low layer of the model contains the five factors which consisted of Security, Availability, Variety, Reliability and Economical efficiency. Second low layer of the model contains the four modified versions which consisted Public&Permissionless, Private&Permissionless, Public&Permissioned and Private& Permissioned types. The structural questionnaire based on the AHP decision support model was designed and used to survey experts of medical areas. The collected data by the question investigation was analyzed by AHP analysis technique. Findings The importance priority of Security was highest among five factors of Technologies Accept Mode in the first layer. The importance priority of Private&Permissioned type was highest among four modified versions of Block chain technologies in second low layer. The second importance priority was Private&Permissionless type. The strong point of Private&Permissioned type is to be able to protect personal information and have faster processing speeds. The advantage of Private& Permissionless type is to be also able to protect personal information as well as from forging and altering transaction data. We recognized that it should be necessary to develop new Block chain technologies that would enable to have faster processing speeds as well as from forging and altering transaction data.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.226-231
• /
• 1991

A graphic control language using function block diagram approach is designed and implemented, applicable to real-time control for continuous process automation system. The procedure implementing the control language is composed of three parts, editor, compiler, and executer. The editor generates the control algorithm file, which contains function block information in the text form, by menu-driven method on the color graphic screen. The compiler translates the contents of the control algorithm file to machine codes and their related data. Then, the executer generates a task that makes the machine codes executed at every sampling period in the target processor. The validity of the concept in its design and implementaion is assured by on-line simulation in the multi-function controller designed for continuous process automation.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.24 no.2
• /
• pp.74-80
• /
• 2016

Development of air navigation and avionics technologies led to solve the problems that conventional ATM system had. The International Civil Aviation Organization developed the Aviation System Block Upgrades (ASBU) initiative in order to harmonize global ATM planning and technology upgrades and urged to implement the recommendations for the member States. The ASBUs provide the road map to assist air navigation service providers in the development of their individual strategic plans and investment decisions. In this paper, the operational concepts in 2 performance improvement areas, Airport Operations and Globally Interoperable System and Data in ASBUs, have been summarized. In Airport Operations area the new management technologies and required systems are presented for optimizing the traffic flow in airport area and terminal airspace. Data format standards and required systems presented for information integration and usage of the new system under Globally Interoperable System and Data area.

• Radiation Oncology Journal
• /
• v.13 no.2
• /
• pp.199-203
• /
• 1995

Purpose: To evaluate the dose under lung block as a function of depth and the effectiveness of a block as a function of block width. Materials and Methods : Field size of mantle field was $22.8{\times}32.4cm^2.$ Dose distribution of the mantle field was measured with two dimensional water phantom system. To analyze the effectiveness of the lung block. central axis plane, 5cm off-axis plane, and 10cm off-axis plane were studied. Results: The dose under the lung block was recorded with maximum at the depth between 5cm and 10cm. In the central axis plane, dosimetric block width was $10-15\%$ less than physical block width. In the 5cm off-axis plane, dosimetric block width was $4-9\%$ less than physical block width. In the 10cm off-axis plane, dosimetric block width was $2\%$ less than physical block width. Conclusion: Depth dependence of the dose under the lung block was founded. Also, block width dependence of the lung block was founded. To induce the accurate relation between the physical block width and the 'effective' block width, it needs more detailed understanding of the variables involved.