• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.7
• /
• pp.572-575
• /
• 2009

In this study, we proposed WLED(White-Light Emitting Diode) driver IC for mobile applications. This IC drove WLED for mobile applications with low input voltage and high efficiency by using boost converter. The device was designed by using boost converter applied current-mode control algorithm and provided PWM(Pulse Width Modulation) & analog dimming. Designed IC consisted of bias block, drive block, control block, protection block. We confirmed this device worked well through a application PCB (Printed Circuit Board) test.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.5
• /
• pp.3399-3406
• /
• 2015

NRD(Network RamDisk) is a scheme which allows a system to use the memory of the remote systems just as his own block device via networking. Basically, it consists of a client requesting an NRD access and server providing the NRD. In this paper, we describe the design, implementation and experiment of the block device driver for accessing the NRD in the Linux kernel(2.6) level. First of all, we have analyzed the flow of processing the requests for accessing the block devices in the traditional Linux kernel and figured out the additional functions required for supporting the NRD. Then we have designed and implemented the device diver of NRD client and NRD server for providing these functions. Finally, we have established a NRD server system, and reviewed its functional feasibility by experimenting the requests of NRD access through the NRD device driver implemented on a NRD client.

• ETRI Journal
• /
• v.37 no.6
• /
• pp.1176-1187
• /
• 2015

This work proposes a highly efficient sensorless motor driver chip for various permanent-magnet synchronous motors (PMSMs) in a wide power range. The motor driver chip is composed of two important parts. The digital part is a sensorless controller consisting mainly of an angle estimation block and a speed control block. The analog part consists of a gate driver, which is able to sense the phase current of a motor. The sensorless algorithms adapted in this paper include a sliding mode observer (SMO) method that has high robust characteristics regarding parameter variations of PMSMs. Fabricated SMO chips detect back electromotive force signals. Furthermore, motor current-sensing blocks are included with a 10-bit successive approximation analog-to-digital converter and various gain current amplifiers for proper sensorless operations. Through a fabricated SMO chip, we were able to demonstrate rated powers of 32 W, 200 W, and 1,500 W.

• Proceedings of the IEEK Conference
• /
• 2002.07b
• /
• pp.932-935
• /
• 2002

In this paper, we introduce new FTL(Flash Translation Layer) driver algorithm that tolerate the power off errors. FTL driver is the software that provide the block device interface to the upper layer software such as file systems or application programs that using the flash memory as a block device interfaced storage. Usually, the flash memory is used as the storage devices of the mobile system due to its low power consumption and small form factor. In mobile system, the state of the power supplement is not stable, because it using the small sized battery that has limited capacity. So, a sudden power off failure can be occurred when we read or write the data on the flash memory. During the write operation, power off failure may introduce the incomplete write operation. Incomplete write operation denotes the inconsistency of the data in flash memory. To provide the stable storage facility with flash memory in mobile system, FTL should provide the fault tolerance against the power off failure. SSR (Simple Sector Remapper) is a fault tolerant FTL driver that provides block device interface and also provides tolerance against power off errors.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.304-305
• /
• 2018

Recently, Industrial-IoT (IIoT) solutions accounted for up to 55% in 2016 and technological innovation and various new business models are being developed. In this paper, apply IIoT device in various environments and implement an ontology system that can interwork with block type IIoT device to easily add / change / delete sensor. The proposed system consists of IIoT device, block-type module, and ontology server. When the block-type module is connected to the IIoT device, the appropriate driver is installed and the firmware is downloaded through the ontology server. Even if a block is added / changed / deleted, it can be updated automatically. Through experiments, we confirmed that the normal operation of the server and the updating and downloading of software are implemented normally.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.14 no.4
• /
• pp.275-283
• /
• 2021

In this study, a driver IC for an AC-powered LED that can be manufactured with a low voltage semiconductor process is designed and the performances of the driver IC were simulated. In order to manufacture a driver IC that operates directly at AC 220V, a semiconductor manufacturing process that satisfies a breakdown voltage of 500V or higher is required. A semiconductor manufacturing process for a high-voltage device requires a much higher manufacturing cost than a general semiconductor process for a low-voltage device. Therefore, the LED driver IC is designed in series so that it can be manufactured with semiconductor process technology that implements a low-voltage device. This makes it possible to divide and apply the voltage to each LED block even if the input voltage is high. The LED lighting circuit shows a power factor of 96% at 220V. In the pnp transistor circuit, a very high power factor of 99.7% can be obtained, and it shows a very stable operation regardless of the fluctuation of the input voltage.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.8 no.5
• /
• pp.235-242
• /
• 2013

Recently, the number of automotive electrical and electronic system has been increased because the requirements for the convenience and safety of the drivers and passengers are raised. In most cases, the data for controlling the various sensors and automotive electrical and electronic system used in runtime should be stored on the internal or external non-volatile memory of the ECU(Electronic Control Units). However, the non-volatile memory has a constraint with write limitation due to the hardware characteristics. The limitation causes fatal accidents or unexpected results if the non-volatile memory is not managed. In this paper, we propose a management scheme for using non-volatile memory to prolong the writing times based on AUTOSAR(AUTOmotive Open System Architecture) platform. Our proposal is implemented on the CDD(Complex Device Driver) and uses an algorithm which swaps a frequently modified block for a least modified block. Through the development of the prototype, the proposed scheme extends the lifetime of non-volatile memory about 1.08 to 2.48 times than simply using the AUTOSAR standard.

• ETRI Journal
• /
• v.44 no.3
• /
• pp.450-461
• /
• 2022

The Gen-Z protocol is a memory semantic protocol between the memory and CPU used in computer architectures with large memory pools. This study presents the implementation of the Gen-Z hardware system configured using Gen-Z specification 1.0 and reports its performance. A hardware prototype of a DDR4 Gen-Z memory pool with an optimized character, a block device driver, and a file system for the Gen-Z hardware was designed. The Gen-Z IP was targeted to the FPGA, and a 512 GB Gen-Z memory pool was configured on an ×86 server. In the experiments, the latency and throughput of the Gen-Z memory were measured and compared with those of the local memory, SATA SSD, and NVMe using character or block device interfaces. The Gen-Z hardware exhibited superior throughput and latency performance compared with SATA SSD and NVMe at block sizes under 4 kB. The MySQL and File IO benchmark of Gen-Z showed good write performance in all block sizes and threads. Besides, it showed low latency in RocksDB's fillseq dbbench using the ext4 direct access filesystem.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2003.09a
• /
• pp.109-119
• /
• 2003

o In order to start SIP Project .Marketing (& ASIC team) should present biz planning, schedule, device/SIP specs., in SIP TFT prior to request SIP development for package development project. .In order to prevent (PCB) revision, test, burn-in, & quality strategy should be fixed by SIP TFT (PE/Test, QA) prior to request for PKG development. .Target product price/cost, package/ test cost should be delivered and reviewed. o Minimum Information for PCB Design, Package Size, and Cost .(Required) package form factor: size, height, type (BGA, QFP), Pin count/pitch .(Estimated) each die size including scribe lane .(Estimated) pad inform. : count, pitch, configuration(in-line/staggered), (open) size .(Estimated) each device (I/O & Core) power (especially for DRAM embedded SIP) .SIP Block diagram, and net-list using excel sheet format o Why is the initial evaluation important\ulcorner .The higher logic power resulted in spec. over of DRAM Tjmax. This caused business drop longrightarrow Thermal simulation of some SIP product is essential in the beginning stage of SIP business planning (or design) stage. (i.e., DRAM embedded SIP) .When SIP is developed using discrete packages, the I/O driver Capa. of each device may be so high for SIP. Since I/O driver capa. was optimized to discrete package and set board environment, this resulted in severe noise problem in SIP. longrightarrow In this case, the electrical performance of product (including PKG) should have been considered (simulated) in the beginning stage of business planning (or design).

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.5-6
• /
• 2006

iSCSI is a block-oriented storage access protocol that enables a user to recognize a remote storage as their own local block device through general TCP/IP networks. This paper presents an alternative approach to overcome the limited storage space of mobile devices based on the iSCSI initiator driver in IPv6 environment, which was originally designed for wired networks.