• Archives of Craniofacial Surgery
• /
• v.19 no.2
• /
• pp.157-161
• /
• 2018

A sialocele is a subcutaneous cavity containing saliva, most often caused by facial trauma or iatrogenic complications. In subcondylar fractures, most surgeons are conscious of facial nerve injury; however, they usually pay little attention to the parotid duct injury. We report the case of a 41-year-old man with a sialocele, approximately $5{\times}3cm$ in size, which developed 1 week after subcondylar fracture reduction. The sialocele became progressively enlarged despite conservative management. Computed tomography showed a thin-walled cyst between the body and tail of the parotid gland. Fluid leakage outside the cyst was noted where the skin was thin. Sialography showed a cutting edge of the inferior interlobular major duct before forming the common major duct that seemed to be injured during the subcondylar fracture reduction process. We decided on prompt surgical treatment, and the sialocele was completely excised. A duct from the parotid tail, secreting salivary secretion into the cyst, was ligated. Botulinum toxin was administrated to block the salivary secretion and preventing recurrence. Treatment was successful. In addition, we found that parotid major ducts are enveloped by the deep lobe and extensive dissection during the subcondylar fracture reduction may cause parotid major duct injury.

• Journal of Fashion Business
• /
• v.18 no.2
• /
• pp.14-28
• /
• 2014

This study analyzed the group of experts who were related to cubism, selected among the works of 2010~2013 Paris Collection based on F.G.R.(Focus Group Research). According to the results of this study, there were appeared first, 'a one-piece dress' second, 'H silhouette' third, 'cotton', in case of item distribution and frequency. The analysis was done by using the manner of expression, cubical expression, exaggeration, distortion, dismantlement, geometrical division of face, mix-match look, wraparound repetition, asymmetric structure, etc. Based on the outcomes of the analysis on figurative design elements, this study adjusted three manners appearing on cubism fashion style. First, it was 'avant garde manner' of constitution or 'dismantlement' which was compiled into multi-view representations of overlaps and viewpoints by repetitive use of color tone trimming detail. Second, it was 'geomagnetic block placement' which expresses cubism with geometric partitioning of surface and separation of panel by cutting disintegration. Finally, it was 'distortion and simplification of silhouette' which is a distortion created by constitution-line pressed thin with silhouette. It maximizes the beauty of human body outline, which was distorted by three-dimensional-manipulation, and simplified by ellipsis for another shape for the extension or expansion of detail trimming.

• Journal of the Society of Naval Architects of Korea
• /
• v.41 no.2
• /
• pp.106-113
• /
• 2004

The block assembly of ship consists of a certain type of heat processes such as cutting, bending, welding, residual stress relaxation and fairing. The residual deformation due to welding is inevitable at each assembly stage. The geometric inaccuracy caused by the welding deformation tends to preclude the introduction of automation and mechanization and needs the additional man-hours for the adjusting work at the following assembly stage. To overcome this problem, a distortion control method should be applied. For this purpose, it is necessary to develop an accurate prediction method which can explicitly account for the influence of various factors on the welding deformation. Systematic and quantitative theoretical works to clarify the effects of various factors on the welding deformation have rarely been found. Therefore, in this paper, the effects of various factors, such as welding process and gravity on the butt welding deformation have been investigated through a number of numerical analyses. In addition, this paper proposes a simplified analysis method to predict the butt welding deformation in actual plate structure. For this purpose, a simple prediction model for butt welding deformations has been derived based on numerical and experimental results through the regression analysis. Based on these results, the simplified analysis method has been applied to some examples to show its validity.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.26 no.6_spc
• /
• pp.687-696
• /
• 2016

A series of process to design an acoustic lens for underwater imaging is reviewed and the method to evaluate characteristics of the lens is investigated. If the target specification of lens is given, the design process consists of the material selection, evaluation of its properties, lens geometry design, prediction of lens characteristics, manufacturing, and evaluation by measurement. In this study, an actual acoustical lens is made by cutting polymethylpentene block. The characteristics of lens are predicted by the hybrid method, combination of ray tracing and Rayleigh integral. For the direct comparison between the prediction and measurement results, a simulation method based on the equivalent source method is suggested to reflect the actual radiation pattern of transducer used for measurements. Finally, the measurement is conducted in a small water tank to observe the actual characteristics of the manufactured lens.

• Journal of Plant Biology
• /
• v.13 no.1
• /
• pp.33-46
• /
• 1970

Pinus densiflora stands are common secondary forest communities on infertile soils in Korea. The stands are results of long severe past biotic pressure such as cutting, burning and grazing. These could be regarded as biotic climax in Korea. Because of their prevalent occurrence, relatively simple species and age composition, and their domestic economic importance, study of their distributional patterns may give some basic knowledge for better utilization of land resources in Korea. To detect distributional patterns and interspecific associations ten pine stands, each of which was homogenious with respect to topography and physiognomy, were subjectively selected from pine stands in Kyunggi Province near Seoul in 1969 and were made object of this study. Four contiguous systematic samples of count for trees, shrubs and seedlings from belt transects were collected from homogeneous areas within ten natural pine stands. The belt transect was 64m or 128m in length, and 1m, 2m or 4m in width. Basic units within the transect ranged from 64 to 256. The data from the contiguous transects were analysed in terms of multiple split-plot experiment. Departure from randomness of stem distribution, i.e., pattern, was tested in terms of variance mean ratio. For the detection of association between species, correlation coefficient was calculated for different block sizes. The values of ${\gamma}$ were tested by the usual t-test. Fine trees within one of the stands showed significant regular distribution through out the blocks. Within other eight stands pines were randomly distributed at basic unit with 4$\times$4m, 2$\times$2m, 2$\times$1m and 1$\times$1m. One significantly clumped distribution at basic unit 2$\times$2m, however, was observed from one of the pine stands. These randomly distributed groups were themselves significantly regularly distributed throughout the blocks for four pine stands. For the other four pine stands, in addition to the random distribution at the basie unit(the primary random group), randomly distributed groups with 32m dimension(the secondary random groups) were also observed. Both the primary and the secondary random groups were significantly regularly distributed at the rest of blocks. Pine seedlings were not distributed randomly thoughout the blocks. Within three of the ten stands they were contagiously distributed. Important shrub species underneath pines such as Querus serrata, Q. acutissima, Leapedeza intermedia, Rhododendron Yedoense var. poukhanenae, Juniperus utilis, Rhododendron mucronulatum var. ciliatum shnwed consistently similar distributional pattern with the pine at each stand. The shrub species pairs; Rhododendron Yedoense var. poukhanenae/Quercus serrata, Rhododendron mucronulatum var. ciliatum/Lespedeza intermedia were significantly negatively associated from 1m to 4m dimensional block sizes but became significantly positively associated from 8m sized blocks on. On the other hand the shrub species pairs; Lespedeza intermedia/Robinia Pseudoacacia, and Lespedeza bicolor var, japonica/Lespedeza intermedia were also significnalty negatively associated from 1m to 8m sized blocks but became significantly positively associated from 16m sized blocks on. The associational pattern between Rhododendron mucronul tun var. poukhanenae and Lespedeza intermedia was not consistent throughout the stands. In some stands negative associations were observed throughout the blocks except NS 32. From these observatons micro-edaphic variation within the pine stands seems not to be great enough to cause distributinal difference of pine trees within the ten pine stands. Among each species and pine seedings, however, the edaphic variation within the pine stands may be great enought to cause distributional variation.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.14 no.1
• /
• pp.2535-2548
• /
• 1972

Instead of fertilizing the lands they moved to find other fertile lands and lived a feudal life agriculture and various machincs played a main role in the land reclamation. The best method of land clearing, the time and capacity in the operation and the effect of growing crops should systematically analized prior to the time of 3rd Five-year Economic Development(1972-1976) in order to cultivate 210,000ha of wasteland or the modernization of our country. The present study was investigated to find out a new working-system of mechanical land clearing and development of fertile soil. The results are as follows: 1) The first stage of productive power increases when weeds were mixed soil in the land clearing work in order to supply organic materials and to make soil swollen instead of burning or just removing. 2) The equipments such as bulldozers, harrows, power tillers and so on should be prepared in order to do a systematic work in the land clearing. 3) The work of pulling-up roots is dependent upon the forms of roots spreading under the ground. The work of the pulling-up of the straight roots was most difficult. But before the roots are pulling-up we do not know the forms of roots. 4) The cutting of soil from upside to under side land clearing method (II) Spent 6 hr 7 min 43 sec per 1 Danbo in doing land clearing and control method spent 4 hr 52 min 30 sec per 1 Danbo in doing land cearing. No significant difference could be found between II treatment type and I treatment type. 5) The volume of soil carried by bulldozer $270.38m^3$ per 1 Danbo in I type and in II type, $368.58m^3$ per 1 Danbo or about 36% increased in II type then in I type. But that is not a significant difference when considering the whole productive power of soil. 6) The land clearing of terrace by bulldozers cannot escape making the embankment slope of about $45^{\circ}$, and 25.3% should be decreased in the area. It is recommended to make use of the embankment slope by planting grass for cows. 7) The time of retary tilling increased 2.3 times or 1 hr 42 min 22 sec per 1 Danbo compared to the timesrequired in the harrowing. Because it mixed the Organic matter on ground and the harrowing of subsoil. 8) The havest of pasture growing on the land reclamation in natural slope is as follows. (a) The none fertilizers with reclaimed block of productivity decresed 1/10 than that of the farmland. Therefore the none fer tilizing in the cultivated pasture is unprofitable. (b) The havest of the manured IV treatment block was the best not only in the kinds of fertilizers but also in the kinds of pasture grass.

• Journal of the Institute of Convergence Signal Processing
• /
• v.8 no.1
• /
• pp.22-31
• /
• 2007

The proposed algorithm in this paper is based on the wavelet decomposition and the energy computation of composed blocks so the amount of calculation and complexity is minimized by adaptively replacing the DWT coefficients and managing the resources effectively. We are now living in the world of a lot. of multimedia applications for many digital electric appliances and mobile devices. Among so many multimedia applications, the digital image compression is very important technology for digital cameras to store and transmit digital images to other sites and JPEG2000 is one of the cutting edge technology to compress still images efficiently. The digital cm technology is mainly using the digital image compression features so that those images could be efficiently saved locally and transferred to other sites without any losses. JPEG2000 standard is applicable for processing the digital images usefully to keep, send and receive through wired and/or wireless networks. The discrete wavelet transform (DWT) is one of the main differences to the previous digital image compression standard such as JPEG, performing the DWT to the entire image rather than splitting into many blocks. Several digital images m tested with this method and restored to compare to the results of conventional DWT which shows that the proposed algorithm get the better result without any significant degradation in terms of MSE & PSNR and the number of zero coefficients when the energy based adaptive DWT is applied.

• Journal of Korean Society for Atmospheric Environment
• /
• v.7 no.3
• /
• pp.208-218
• /
• 1991

To compare the resistance of landscape trees by acid rain, simulated acid rain was treated on the seeds of 6 coniferous species (Pinus densiflora, Pinus thunbergii, Pinus koraiensis, Taxus cuspidata, Cedrus deodara, Thuja occidentalis) and 6 broad-leafed species (Ligustrum obtusifolium, Acer Buergerianum, Acer Ginnala, Styrax obassia, Cornus Kousa, Magnolia obovata). The experimental design of randomized block arrangement with three replications was implemented in the experimental field of Yesan National Agri-Tech Junior College. The seeds of 12 tree species were planted on the nursery soil in the early spring of 1991. The regime of artificial acid rain, in terms of spray frequency per monthly and spray amount at year records. Simulated acid rain (pH 2.0, pH 4.0, pH 5.6 as control) containing sulfuric and nitric acid in the ratio of 3:2 (chemical equivalant basis) diluted ground water, were treated on the experimental plants under condition of cutting off the natural precipitation with vinyl tunnel, during the growing season (April 8 to August 31) in 1991. Seedling establishment, seedling growth and nutrient contents in needles and leaves were measured and compared among the treatment. The results were summerized as follows; 1. In general, coniferous species were more resistant than broad-leafed species in the resistant comparisons of landscape trees by simulated acid rain. But there were resistant tree species to acid rain among the broad-leafed species. 2. Among 6 coniferous species used in this experiment, Pinus densiflora, Pinus koraiensis, Taxus cuspidata, Cedrus deodara and Pinus thunbergii revealed the resistant tree species to acid rain. But Thuja occidentalis was very susceptible to acid rain, because of no germination in pH 2.0 treatment plot of acid rain. 3. Among 6 broad-leafed species used in this study, Magnolia obovata, Styrax obassia and Ligustrum obtusifolium showed relative resistant tree species to acid rain. But Acer Buergerianum, Acer Ginnala and Cornus Kousa were very susceptible to acid rain, because of no germination in pH 2.0 plot of acid rain treatment.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.9 no.3
• /
• pp.315-325
• /
• 2017

The design dimension may not be satisfactory at the final stage due to the welding during the assembly stage, leading to cutting or adding the components in large structure constructions. The productivity is depend on accuracy of the welding quality especially at assembly stage. Therefore, it is of utmost importance to decide the component dimension during each assembly stage considering the above situations during the designing stage by exactly predicting welding deformation before the welding is done. Further, if the system that predicts whether welding deformation is equipped, it is possible to take measures to reduce deformation through FE analysis, helping in saving time for correcting work by arresting the parts which are prone to having welding deformation. For the FE analysis to predict the deformation of a large steel structure, calculation time, modeling, constraints in each assembly stage and critical welding length have to be considered. In case of fillet welding deformation, around 300 mm is sufficient as a critical welding length of the specimen as proposed by the existing researches. However, the critical length in case of butt welding is around 1000 mm, which is far longer than that suggested in the existing researches. For the external constraint, which occurs as the geometry of structure is changed according to the assembly stage, constraint factor is drawn from the elastic FE analysis and test results, and the magnitude of equivalent force according to constraint is decided. The comparison study for the elastic FE analysis result and measurement for the large steel structure based on the above results reveals that the analysis results are in the range of 80-118% against measurement values, both matching each other well. Further, the deformation of fillet welding in the main plate among the total block occupies 66-89%, making welding deformation in the main plate far larger than the welding deformation in the longitudinal and transverse girders.

• Journal of Technologic Dentistry
• /
• v.38 no.4
• /
• pp.255-262
• /
• 2016

Purpose: This study examined the effect of wettability of gypsum materials and rubber impression material on the marginal fitness of zirconia copings. Methods: Three commercially available gypsum materials(Fugirock EP, Snow Rock, Tuff Rock) and three zirconia blocks(iJAM Emerald, LUXEN Smile block, ICE Zirkon transluzent) were studied. The zirconia copings were fabricated by using dental CAD/CAM system. Contact angles on the impression materials were measured with contact angle measuring device. Silicone replica method was used to measure the marginal fitness and cutting was performed on the bucco-lingual and mesio-distal sides. It were observed with a stereomicroscope at °ø40 magnification. The data were statistically analyzed with One-way ANOVA. Results: Mean values of contact angles were $58.3{\pm}0.7^{\circ}$ for Tuff Rock, $77.5{\pm}0.5^{\circ}$ for Fugirock EP and $87.8{\pm}0.5^{\circ}$ for Snow Rock and the difference between them was statistically significant(p<0.05). The smallest values of marginal fitness for the JF groups were $30.7{\pm}3.0{\mu}m$ for bucco-lingual direction, $29.3{\pm}3.0{\mu}m$ for mesio-distal direction. One-way ANOVA showed statistically significant difference between groups for marginal fitness(p<0.05). Conclusion: Tuff rock gypsum material had superior wettability to others. The mean marginal fitness of the Tuff rock gypsum material group were significantly better than other groups. Thus they can be also expected to show clinically satisfactory marginal fitness.