Journal of the Society of Naval Architects of Korea (대한조선학회논문집)

The Society of Naval Architects of Korea (대한조선학회)
권호 표지
DOI QR코드

DOI QR Code

Development of Simple Prediction Model for V-groove butt welding deformation

V-개선 맞대기 용접변형에 대한 간이 예측 모델 개발

  • 김상일 (로이드선급협회 울산지부)
  • Published : 2004.04.01
Download PDF
⟨ Previous Next ⟩

Abstract

The block assembly of ship consists of a certain type of heat processes such as cutting, bending, welding, residual stress relaxation and fairing. The residual deformation due to welding is inevitable at each assembly stage. The geometric inaccuracy caused by the welding deformation tends to preclude the introduction of automation and mechanization and needs the additional man-hours for the adjusting work at the following assembly stage. To overcome this problem, a distortion control method should be applied. For this purpose, it is necessary to develop an accurate prediction method which can explicitly account for the influence of various factors on the welding deformation. Systematic and quantitative theoretical works to clarify the effects of various factors on the welding deformation have rarely been found. Therefore, in this paper, the effects of various factors, such as welding process and gravity on the butt welding deformation have been investigated through a number of numerical analyses. In addition, this paper proposes a simplified analysis method to predict the butt welding deformation in actual plate structure. For this purpose, a simple prediction model for butt welding deformations has been derived based on numerical and experimental results through the regression analysis. Based on these results, the simplified analysis method has been applied to some examples to show its validity.

Keywords

References

  1. 김상일, 1999, 선체 구조의 용접변형 제어법 개발, 울산대학교 공학박사 학위 논문
  2. 김상일(a), 2003, “필릿 용접변형에 대한 간이예측 모델 개발,” 대한조선학회 논문집, 제40권, 제1호, pp. 49-56.
  3. 김상일(b), 2003, “필릿 용접된 거더와 종통재부재의 용접변형 예측,” 대한조선학회 논문집, 제40권, 제1호, pp. 57-62.
  4. 방한서, 1990, “유한요소법에 의한 2차원 비정상 열전도해석,” 대한조선학회 논문집, 제27권, 제4호, pp. 43-50.
  5. 장창두, 서승일, 1994, “용접 조립보의 변형 예측에 관한 연구,” 대한조선학회 논문집, 제31권, 제3호, pp. 145-153.
  6. 장창두, 이창현, 2000, “선체 블록의 용접변형 예측 및 제어를 위한 연구,” 대한조선학회 논문집, 제37권, 제2호, pp. 127-136.
  7. Fujita, Y. and Nomoto, T., 1972, “Studies on thermal elasto-plastic problems(1st report),” Journal of the Society of Naval Architects of Japan, Vol. 130, pp.183-191.
  8. Kim, S.I., Kang, J.K. and Han, J.M., 2002, “Development of welding deformation control method for hull structure of Ro/Ro passenger ferry,” Proceedings of ISOPE-2002, pp. 314-320.
  9. Ijichi, M. et al. 1985, “Computer Application to Accuracy Control in Hull Construction,” Proceedings of ICCAS'85, pp. 475-484.
  10. Ueda, Y. and Yamakawa, T., 1973, “Analysis of thermal elastic-plastic behavior of metals during welding by finite element method,” Journal of the Japanese Welding Society, Vol. 42, No. 6, pp.567-577. https://doi.org/10.2207/qjjws1943.42.567
  11. Ueda, Y., Murakawa, H., Gu, S., Okumoto, Y. and Ishiyama, M., 1994, “Simulation of welding deformation for accurate ship assembling(3rd report),” Journal of the Society of Naval Architects of Japan, Vol. 176, pp. 341-350.