• Journal of The Korean Society of Grassland and Forage Science
• /
• v.8 no.3
• /
• pp.92-98
• /
• 1988

With a purpose of finding out the effects of magnesium and boron enriched organic-compound fertilizer application on the dry matter yield, yield components and changes in the botanical composition on the hilly pasture, a field experiment was arranged with five different treatments as a randomized block design and lasted from September, 1984 to the end of growing season in 1986. The results obtained are summarized as follows : 1. As a early plant growth and development, winter hardiness, growth vigour and coverage of grasses at the plots with organic-compound fertilizer application were better comparing to single dressing. 2. Average dry matter yields for two years were shown significantly high due to increasing amount of fertilizer. This trend was same both single and organic-compound fertilizer. And dry matter yields with organic-compound fertilizer application of low (8, 693.1 kg/ha) and conventional level (12, 758.7 kg/ha) were appeared to increase by 10 and 15% than those of single dressing of Low (7, 930.6 kg/ha) and conventional level (11, 122.6 kg/ha), respectively. But it was not significant difference. 3. Dry matter yield of grasses was significantly gained by increasing amount of fertilizer. The yield of legumes at the plot without fertilization was significant higher comparing to fertilizing plots, but it was not different between low and conventional dressing levels. However, at the plots with organic-compound fertilizer application the yields of grasses were a little more increased by 8-14%, and legumes were much more gained by 26-29% than those of the same species groups with single dressing, but it was not significant between the different kinds of fertilizer in the same fertilizing level. 4. At the grassland management, the rate of legumes tended to dominate at the plot without fertilization gradually. On the other hand, the botanical compositions and the rates of grasses were much better maintained at the plots with fertilization. But the rates of legumes with organic-compound fertilizer application tended to increase a little more than those of single dressing gradually.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.29 no.1
• /
• pp.7-12
• /
• 2009

This experiment was conducted to compare the agronomic characteristics and productivity in introduced forage pea cultivars at the experimental field. The experiment was arranged in a randomized block design with three replications. The forage pea used in this study were two cultivars ('Livioletta', 'Austrian Pea') and one Chinese milk vetch cultivar (Chinese domestic cultivar). Flowing of 'Livioletta' cultivar was May 16th and 'Austrian Pea' cultivar was 18th May, 20 days later than the former. The 'Livioletta' cultlvar showed stronger than winter hardiness of 'Austrian Pea' cultivar. Dry matter (DM) content of 'Liviotetta' and 'Austrian Pea' cultivars were 22.5% and 20.9% chinese milk vetch showed the lowest content with 17.7%. 'Austrian pea' cultivar showed the highest DM yield with 5,617 kg/ha but the DM yield of 'Livioletta' cultivar was low with 3,652 kg/ha. The yield of CP (crude protein) and TDN (total digestible nutrient) set high at 'Austrian Pea' cultivar. And 'Livioletta' and 'Austrian Pea' cultivars showed CP content with 15.5% and 14.4% but Chinese milk vetch with 19.3%. The acid detergent fiber (ADF) and neutral detergent fiber (NDF) content of 'Austrian Pea' cultivar were 23.2% and 40.3%. Therefore 'Austrian pea' cultivar seems to be suitable varieties in paddy field as winter forage crops.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.37 no.2
• /
• pp.161-167
• /
• 2017

This experiment was conducted to comparison study on the productivity for certified varieties of import adaptability of silage corn in Pyeongchang area. Total eight varieties (Gangpyeongok, 31N27, 32P75, 32W86, P3156, P3394, DK 689 및 DK 729) were evaluated. The experimental design was 8 treatment of randomized block with three replications. Corn varieties were cultivated in experimental field of Pyeongchang campus, SNU from 1 May to 2 September, 2015 and plot size was $15m^2$. Plant height of 32W86 and ear height of Gwanpyeongok was the highest (p<0.05). Tasseling and silking date was 27 July-3 August and silking occurred after 1-3 day of tasseling. Average day to silking was 92 days and that of 31N27 variety was short (p<0.05). The varieties of DeKalbo Company (DK 689 and DK 729) required more times to silking. Average GDD (growth degree day) of eight varieties was $1,023^{\circ}C$ and P3352 was the lowest GDD. In the trials of resistance evaluation, P3394 was strong in disease, P3156 was the highest in insect. All varieties did not show the lodging and variety of DK 729 showed the highest stay green score (p<0.05). Average dry matter content was 30.77%, it showed higher trend in DM. 32W86 was the highest DM content among the varieties, but there was no significant difference among varieties (p>0.05). The weight per ear was the highest in 32W86 and the lowest in Gwanpyeongok. The ration of ear to whole plant was higher in 32W86 and P3394, but it was not found the significant difference (p>0.05). Average yield of fresh and DM was 59,017 and 13,476 kg/ha, respectively. DK 689 showed higher DM and TDN yield than others, but there was not significant difference (p>0.05). According to results, the difference of productivity was not found among certified variety of import adaptability of silage corn. The varieties Gwanpyeongok, 32W86 and 32P75 would be recommendable in Pyeongchang area for stable cultivation.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.37 no.4
• /
• pp.277-282
• /
• 2017

This study was conducted to evaluate on agronomic characteristics, forage quality and dry matter (DM) yields of mugwort (Artemisia princeps Pamp.) collected different region at Seongju in Kyeongbuk from 2014 to 2015. The experiment was arranged in randomized complete block design with three replications. Mugwort was planted on $17^{th}$ March, 2014 and harvested on $13^{th}$ September, 2014 and on $25^{th}$ May and $9^{th}$ September, 2015. DM yields of Dalsung(1), Seongju B.(1), Dalsung(2) and Sajuarissuk were 17.3, 16.8, 16.7 and $16.7(MT\;ha^{-1})$, respectively and the DM yields of those were higher (p<0.05) than the other mugworts in 2014. In 2015, DM yields of Dalsung(1), Dalsung(2), Seongju B.(1), and Sajuarissuk were 19.5, 19.3, 18.4 and $18.4(MT\;ha^{-1})$, respectively and DM yields of those were higher (p<0.05) than the others. DDM(digestable dry matter) content of mugworts was a range of 56.4 to 60.8% and that of Sajabalssuk, 60.8% was the highest. Seongju B.(1) 58.8% was higher than Seongju B.(2) 56.4% but there were no difference among the Dalsung(1) 58.4%, Dalsung(2) 58.1%, Sajuarissuk 57.7% and Yeongcheon. The result of this study indicated that Dalsung(1), Dalsung(2), Sajuarissuk and Seongju B.(1) would be recommendable for forage production.

• Restorative Dentistry and Endodontics
• /
• v.28 no.1
• /
• pp.89-99
• /
• 2003

The purpose of this study was to investigate the bonding of resin- based root canal sealer, AH26 when the sealer was applied as a thin layer between dentine and gutta-percha surface. In this study forty non-caries extracted human molars and resin-based root canal sealer(AH 26, DeTrey/Dentsply, Germany) were used. Disks of gutta-percha, 6mm in diameter.6mm thick (Diadent/Dentsply, Korea) for thermoplastic obturation were used and dentin surfaces were treated with 2% NaOCl(Group 1) or 2%NaOCl+17% EDTA(Group 3). Disks of gutta-Percha, 6mm in diameter.6mm thick (Diadent/Dentsply, Korea) for conventional obturation were used and dentin surface were treated with 2% NaOCl(Group 2) or 2%NaOCl+17% EDTA(Group 4). Enamel was removed by a horizontal section 1mm below the deepest portion of the central occlusal groove by using a watercooled low speed diamond saw. A second horizontal section was done around cementoenamel junction. Exposed dentin surface was cut to approximately $8{\times}8{\;}mm$ rectangular shape and was ground against 320, 400, 600 grade silicon carbide abrasive paper serially. After grinding, the dentine surface were soaked in a solution of 2% NaOCl for 30 minutes and twenty of specimens were treated with 17% EDTA solution for 1 minute. The treated specimens were washed and dried, Root canal sealer, AH26 was prepared according to the manufacture's instructions The Gutta-percha and dentin surface were coated with a thin layer of the freshly mixed seal or. The specimens were left overnight at room temperature. After their initial set, they were transferred to an incubator at $37$^{\circ}C$ for 72 h. After 72 hours, resin blocks were made. The resin block was serially sectioned vertically into stick of $1{\cdot}1mm$. Twenty sticks were prepared from each group. After that, tensile bond strength f3r each stick was measured with Microtensile Tester Failure patterns of the specimens at the interface between gutta-percha and dentin were observed under the SEM(x1000) and Stereomicroscope (LEICA M42O, Meyer Inst., TX U.S.A) at 1.25 x25 magnification. The results were statistically analysed by using a One-way ANOVA and Tukey's test. The results were as follows; 1. Tensile bond strengths($mean{\pm}SD$) were expressed with ascending order as follows: Group 1, $3.09{\pm}$ 1.05Mpa : Group 2, $6.23{\pm}1.16MPa$ : Group 3, $7.12{\pm}1.07MPa$ : Group 4, $10.32{\pm}2.06MPa$. 2. Tensile bond strengths of the group 2 and 4 used disks of gutta-percha for conventional obturation were significantly higher than that of the group 1 and 3 used fir thermoplastic obturation. (p < 0.05). 3. Tensile bond strengths of the group 3 and 4 treated with 2% NaOC1+17% EDTA were significantly higher than that of the group 1 and 2 treated with 2% NaOCl. (p < 0.05). 4. In analysis of failure patterns at the interface between sealer and gutta-percha, there were observed 49 (61%)cases of adhesive failure patterns and 31 (39%) cases of mixed failures patterns.

• Restorative Dentistry and Endodontics
• /
• v.28 no.1
• /
• pp.80-88
• /
• 2003

Object The purpose of this study were to evaluate the microtensile bond strength of resin fiber reinforced post to radicular dentin using resin cement according to various dentin surface treatment and to observe the inter face between post and root dentin under SEM Material and Method A total 16 extracted human single rooted teeth were used. A lingual access was made using a #245 carbide bur in a high-speed handpiece with copious air water spray. The post space was mechanically enlarged using H-file(up to #60) and Gates Glidden bures(#3). This was followed by refining of the canal space using the calbrating drill set provided in ER Dentinpost(GEBR, BRASSELER GmbH&Co. KG). The 16 teeth were randomly distributed into 4 group of 4 teeth. Group 1 teeth had their post space prepared using 10% phosphoric acid as root canal surface treatment agent during 20s. The canal was then rinsed with saline and dried with paper point. Group 2 teeth had their post space prepared using 3% NaOCl as root canal surface treatment agent during 30min. The canal was then rinsed with saline and dried with paper point. Group 3 teeth had their post space prepared using 17% EDTA as root canal surface treatment agent during 1min. The canal was then rinsed with saline and dried with paper point. Group 4 teeth had their post space prepared using 17% EDTA as root canal surface treatment agent during 1min. After rinsing with saline, the canal was rinced 10m1 of 3% NaOCl for 30min. After drying with paper point, the post(ER Dentinpost, GEBR, BRASSELER GmbH&Co. KG) was placed in the treated canals using resin cement. Once the canal was filled with resin cement(Super bond C&B sunmedical co. Ltd.), a lentulo was inserted to the depth of the canal to ensure proper coating of the root canal wall. After 24 hours, acrylic resin blocks($10{\cdot}10{\cdot}50mm$) were made. The resin block was serially sectioned vertically into stick of $1{\cdot}1mm$. Twenty sticks were prepared from each group. After that, tensile bond strengths for each stick was measured with Microtensile Tester. Failure pattern of the specimen at the interface between post and dentin were observed under SEM. Results 1. Tensile bond strengths(meen{\pm}SD$) ) were expressed with ascending order as follows group 4, $12.52{\pm}6.60$ ; group 1, $7.63{\pm}5.83$ ; group 2, $4.13{\pm}2.31$ ; group 3, $3.31{\pm}1.44$. 2. Tensile bond strengths of Group 4 treated with 17% EDTA +3%NaOCl were significant higher than those of group 1, 2 and 3 (p<0.05). 3. Tensile bond strengths of Group 1 treated with 10% phosphoric acid were significant higher than those of group 2 (p<0.05). Tensile bond strengths of Group 4 treated with 17% EDTA +3% NaOCl was significant higher than those of other groups.

• Journal of Korean Society for Geospatial Information Science
• /
• v.22 no.3
• /
• pp.57-69
• /
• 2014

As of 2013, Korean population density is 505 persons per $1km^2$ and is ranked 3rd place in the most densely populated countries exception of city-states. It shows clearly the population is concentrated in the city area. To fulfil this urban concentration population demand, the enlargement and complexation of buildings, subway and other underground spaces connection tendency has been intensified, and it is need to construct the indoor spatial information DB as well as the accurate indoor surveying DB to promote people's safety and social welfare. In this study, Sadang station and Incheon National Airport were aimed for the construction of Wi-Fi AP location DB and RadioMap DB by collecting the indoor AP raw datas by using mobile device and those collected results were ran through the process of verification, supplementation, and analyzation. To evaluate the performance of constructed DB, 10 points in Incheon Airport- 3rd flr in block A, and 9 points in Sadang station-B1 were selected and calculated the estimated points and ran evaluation experiment using survey positioning error, which is distance between real position and the estimated position. The result shows that Incheon international airport's average and standard deviation was separately 17.81m, 17.79m and Sadang station's average and standard deviation was separately 22.64m, 23.74m. In Sadang station's case, the areas near the exit has low performance of surveying position due to fewer visible AP points than other areas. As total datas were examined except those position, it was verified that the user's location was mapping close position in surveying positioning by using constructed DB. It means that constructed DB contains correct Wi-Fi AP locations and radio wave patterns in object region, so it is considered that the indoor spatial information service based on constructed DB would be available.

• Journal of Animal Science and Technology
• /
• v.50 no.4
• /
• pp.527-534
• /
• 2008

Effects of dietary concentrate levels based on whole-crop barley silage (BS) on development and meat quality in growing Korean black goats were examined. A total of 36 male goats with similar age and BW were equally allocated to dietary four treatments in a randomized complete block design. Dietary treatments included controls(rice straw ad libitum plus 2.0% concentrate BW－1), and BS ad libitum plus three increasing levels of concentrate BW－1(2.0, 1.5 and 1.0%, respectively), expressed as BS 2.0, BS 1.5 and BS 1.0, respectively. The trial was lasted for 5 months from 14th of May to 12th of October, 2007. At the end of trial, all animals were slaughtered to analyze carcass characteristics and meat quality. Average daily gain was significantly(p<0.05) higher for BS 1.5 and BS 2.0 treatments than for controls. Daily feed intakes for controls(689.3 g) were significantly(p<0.05) higher than those of BS 1.0(585.5 g), but they were significantly(p<0.05) lower than BS 2.0(734.3 g). Carcass and meat percentages were significantly (p<0.05) higher for BS 2.0 and BS 1.5 than for control and BS 1.0 treatments. Shear force and water-holding capacity was greater(p<0.05) for BS 2.0 and BS 1.5 than other treatments. On the basis of feeding whole-crop barley silage to Korean black goats, as dietary concentrate inclusion levels increased, sensory results showed to have a better tendency. In conclusion, it was estimated that the optimal level of dietary concentrates might be 1.5% BW－1, when diets based whole-crop barley silage were fed to growing Korean black goats for their improvements of growth and meat quality.

• Korean Journal of Environmental Biology
• /
• v.20 no.1
• /
• pp.73-77
• /
• 2002

The effect of salicylic acid (SA) on C $d^{2+}$ - induced physiological toxicity in Commelina communis was investigated. 3- weeks old Commelina communis was transferred to and grown in Hoagland solution in the presence or absence of 100 $\mu$M C $d^{2+}$ and SA for 3 weeks. In the treatment of C $d^{2+}$ + SA, the length of stem was increased to 0.7 cm for 3 weeks (C $d^{2+}$, 2.1cm; control, 7.2 cm). C $d^{2+}$ + SA reduced total chlorophyll content up to 86%, and changed chlorophyll a/b ratio below 1.6. C $d^{2+}$ + SA also reduced about 40-78% of water potential, but C $d^{2+}$ increased 16-39% from 1 week to 3 weeks. C $d^{2+}$ + SA also inhibited 27% of Fv/Fm, but in case of C $d^{2+}$, Fv/Fm was not changed. The treatment of C $d^{2+}$ + SA showed about 37-58% inhibition of photosynthetic activity when measured at various light intensity (500-1000 $\mu$mol $m^{-2}$ $s^{-1}$ ). In the case of C $d^{2+}$ treatment, photosynthetic activity was inhibited to 12-15%. Similar effect was found in terms of stomatal conductance. Therefore, it could be concluded that the treatment of C $d^{2+}$ + SA into plant decrease or block various physiological activities and lend to die by double effects of both chemicals.cts of both chemicals..

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.24 no.3
• /
• pp.245-252
• /
• 2004

Experiment was carried out to find the fertilizing effects of 8 different application rates of swine compost fermented with sawdust(SCS) including Chemical fertilizer(CF) on forage yield and soil chemical characteristics of mixed pastures sown in Sep. 1993 at National Livestock Research Institute, RDA., in Suwon during low years. It was arranged in a randomized complete block design with three replicates. Dry matter yield were shown at similar among treatments except Control and $50\%$ SCS of standard amount plot. In botanical composition, the legume and weeds percentages of each treatment were increased as advancing year. The final year's legume percentage were high in line with SCS fertilizing plots($39\%{\sim}43\%$), SCS + CF plots($30\%{\sim}41\%$) and CF plot($32\%$). In productions of TDN, NE and crude protein yield, SCS or SCS($75\%$) + CF($25\%$) were nearly same comparing those of CF, respectively. Phosphate, potassium, magnesium contents and K/(Ca + Mg) except calcium contents of those SCS fertilizing plots in plant were generally high with comparing CF. Those contents were proportional according to the fertilizing amount These result indicate the possibility to substitute chemical fertilizer for SCS($75\%$, 25ton/ha) + CF, $25\%$) as manure-N 210 kg/ha, but might be considered accumulation phosphate in the soil.