• Journal of the Institute of Convergence Signal Processing
• /
• v.11 no.1
• /
• pp.13-18
• /
• 2010

Most of the research in the multi-touch area is based on the FTIR(Frustrated Total Internal Re리ection), which is just implemented by using the previous approach. Moreover, there are not the software solutions to improve a performance in the multi touch-blobs detection or the user gesture recognition. Therefore, we implement a multi-touch table-top display that is based on the DI(Diffused Illumination), the improved touch-points detection and user gesture recognition. The proposed method supports a simultaneous transformation multi-touch command for objects in the running application. Also, the system latency time is reduced by the proposed ore-testing method in the multi touch-blobs detection processing. Implemented device is simulated by programming the Flash AS3 application in the TUIO(Tangible User Interface Object) environment that is based on the OSC(Open Sound Control) protocol. As a result, Our system shows the 37% system latency reduction, and is successful in the multi-touch gestures recognition.

• Proceedings of the Korea Contents Association Conference
• /
• 2009.05a
• /
• pp.17-22
• /
• 2009

DaVinci processors are popular media processors for implementing embedded multimedia applications. They support dual core architecture: ARM9 core for video I/O handling as well as system management and peripheral handling, and DSP C64+ core for effective digital signal processing. In this paper, we propose our efforts for optimal implementation of object tracking algorithm in DaVinci-based smart camera which is being designed and implemented by our laboratory. The smart camera in this paper is supposed to support object detection, object tracking, object classification and detection of intrusion into surveillance regions and sending the detection event to remote clients using IP protocol. Object tracking algorithm is computationally expensive since it needs to process several procedures such as foreground mask extraction, foreground mask correction, connected component labeling, blob region calculation, object prediction, and etc. which require large amount of computation times. Thus, if it is not implemented optimally in Davinci-based processors, one cannot expect real-time performance of the smart camera.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.11
• /
• pp.2121-2127
• /
• 2017

In this paper, we propose a computer vision based automatic defect detection method from ceramic image for non-destructive testing. From region of interest of the image, we apply brightness enhancing stretching algorithm first. One of the strength of our method is that it is designed to detect defects of images obtained from various thicknesses, that is, 8, 10, 11, 16, and 22 mm. In other cases we apply histogram based binarization algorithm. However, for 8 mm case, it may have false positive cases due to weak brightness contrast between defect and noise. Thus, we apply modified fuzzy binarization algorithm for 8 mm case. From the experiment, we verify that the proposed method shows stronger result than our previous study that used Blob labelling for all five thickness cases as expected.

• Journal of Chest Surgery
• /
• v.40 no.5 s.274
• /
• pp.362-368
• /
• 2007

Background: Spontaneous pneumothorax patients with blebs or bullae are considered to be good candidates for operation, and various objective diagnostic modalities have been performed for detection of blebs and bullae. This study was performed to compare the efficacy of thoracoscopic examination with using a minimally invasive 2 mm thoracoscope with high-resolution computed tomography (HRCT) for treating primary spontaneous pneumothorax. Material and Method: From June 2001 to March 2002, 34 patients with spontaneous pneumothorax undewent study with 2 mm video-thoracoscopic examination and HRCT. We regarded a blob larger than 5 mm in diameter as significant. Standard thoracoscopic wedge resection was performed in 18 patients with significant blob via a 2 mm video-thoracoscopic examination. 1 patient incurred bleeding, and the remaining 15 patients were treated with pleural drainage. Result: Multiple or single blob lesions were detected by 2 mm video-thoracoscope in 52.9% (18/34) of the patients with primary pneumothorax. For a total of 19 patients who were operated on, the diagnostic accuracy of the 2 mm video-thoracoscopic examination for bullae and blob was 94.7% (18/19), which was superior to that of HRCT (73.7%, 14/19). At a mean follow-up of $30{\pm}3$ months, no recurrence occurred in both the operative group and the non-operative group. Conclusion: 2 mm video-thoracoscopic examination under local anesthesia has higher diagnostic accuracy than HRCT, and it is a useful alternative for determining the operative indications for spontaneous pneumothorax.

• Proceedings of the IEEK Conference
• /
• 2009.05a
• /
• pp.172-174
• /
• 2009

This paper describes an implementation method for the 'People Counting System' which detects and tracks moving people using a fixed single camera. This system proposes the method of improving performances by compensating weakness of existing algorithm. For increasing effect of detection, this system uses Single Gaussian Background Modeling which is more robust at noise and has adaptiveness. It minimizes unnecessarily detected area that is a limitation of the detecting method by using the background differences. And this system prevents additional detecting problems by removing shadow. Also, This system solves the problems of segmentation and union of people by using a new method. This method can work appropriately, if the angle of camera would not strictly vertical or the direction of shadow were lopsided. Also, by using integration System, it can solve a number of special cases as many as possible. For example, if the system fails to tracking, it will detect the object again and will make it possible to count moving people.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.191-195
• /
• 2003

The formation degree of sustain (ITO pattern) decides quality of PDP (plasma display panel). For this reason. it makes efforts in search defects more than 30 ${\mu}{\textrm}{m}$. Now, the existing inspection process is dependent upon naked eye or SEM equipment in off-line PDP manufacturing process. In this study developed prototype inspection system of PDP ITO glass. This system creates information that detects and sorts kind of defect automatically. Design ed inspection technology adopts line-scan method by slip-beam formation for the minimum of inspection time and image processing algorithm is embodied in detection ability of developed system. Designed algorithm had to make good use of kernel matrix which draws up an approach to geometry. A characteristic of area-shaped defects, as pin hole, substance, protrusion et al, are extracted from blob analysis method. Defects, as open, short, spots, et al, are distinguished by line type inspection algorithm. In experiment results, we could have ensured ability of inspection that can be detected with reliability of up to 95% in about 60 seconds

• Journal of Digital Contents Society
• /
• v.14 no.4
• /
• pp.455-462
• /
• 2013

This paper proposes a detection system that, by determining whether a dangerous act is being carried out among other pedestrians in the images captured using CCTV, provides pre-warnings and establishes emergency measures. To determine the presence of a dangerous act, after setting zones of interest and danger zones within those zones of interest, the danger level is determined in accordance with the range of encroachment upon detecting an object. Especially, this research aims at detecting a suicide jump from the bridge and extends to detecting a dangerous act among pedestrians from detecting a dangerous act of only one person with no one in the previous research. This system classifies the status into 3 levels as safe, alert, and danger according to the amount of part being over the bridge railing. If a situation is deemed as warning-worthy and emergency, the integrated control center is immediately alerted to facilitate prevention in advance.

• Journal of Korea Multimedia Society
• /
• v.10 no.10
• /
• pp.1271-1283
• /
• 2007

To detect defect of FPD(flat panel displays) is very difficult due to uneven illumination on FPD panel image. This paper presents a method to detect various types of defects using the approximated image of the uneven illumination by B-spline. To construct a approximated surface, corresponding to uneven illumination background intensity, while reducing random noises and small defect signal, only the lowest smooth subband is used by wavelet decomposition, resulting in reducing the computation time of taking B-spline approximation and enhancing detection accuracy. The approximated image in lowest LL subband is expanded as the same size as original one by wavelet reconstruction, and the difference between original image and reconstructed one becomes a flat image of compensating the uneven illumination background. A simple binary thresholding is then used to separate the defective regions from the subtracted image. Finally, blob analysis as post-processing is carried out to get rid of false defects. For applying in-line system, the wavelet transform by lifting based fast algorithm is implemented to deal with a huge size data such as film and the processing time is highly reduced.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.19 no.4
• /
• pp.586-591
• /
• 2009

In this paper, we propose the mobile object tracking algorithm based on the feature vector using particle filter. To do this, first, we detect the movement area of mobile object by using RGB color model and extract the feature vectors of the input image by using the KLT-algorithm. And then, we get the first feature vectors by matching extracted feature vectors to the detected movement area. Second, we detect new movement area of the mobile objects by using RGB and HSI color model, and get the new feature vectors by applying the new feature vectors to the snake algorithm. And then, we find the second feature vectors by applying the second feature vectors to new movement area. So, we design the mobile object tracking algorithm by applying the second feature vectors to particle filter. Finally, we validate the applicability of the proposed method through the experience in a complex environment.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.36 no.6
• /
• pp.525-534
• /
• 2018

Camera calibration is the process of determining the parameters such as the focal length of a camera, the position of a principal point, and lens distortions. For this purpose, images of checkerboard have been mainly used. When targets were automatically recognized in checkerboard image, the existing studies had limitations in that the user should have a good understanding of the input parameters for recognizing the target or that all checkerboard should appear in the image. In this study, a methodology for automatic target recognition was proposed. In this method, even if only a part of the checkerboard image was captured using rectangles including eight blobs, four each at the central portion and the outer portion of the checkerboard, the index of the target can be automatically assigned. In addition, there is no need for input parameters. In this study, three conditions were used to automatically extract the center point of the checkerboard target: the distortion of black and white pattern, the frequency of edge change, and the ratio of black and white pixels. Also, the direction and numbering of the checkerboard targets were made with blobs. Through experiments on two types of checkerboards, it was possible to automatically recognize checkerboard targets within a minute for 36 images.