• 공업화학
• /
• 제4권2호
• /
• pp.358-364
• /
• 1993

2-Ethylhexylaminoethyl sulfate, Na-dioctyl sulfosuccinate, Newpol PP-2000, MJU-100, 에틸렌글리콜 및 유기용제 등을 블렌딩하여 저기포성 정련제(SLFS)를 제조하였다. SLFS로서 여러가지 물성시험을 해 본 결과, SLFS-2는 정련효과, 침투력, 유화력, 내알칼리성 등이 양호하였으며, 수질오염에 대한 영향이 크지 않았다. 또한 SLFS-2는 Ross & Miles법에 의한 거품생성 직후의 기포력이 포고 8mm로 나타났고, Ross & Clark법에 의한 기포력이 $30^{\circ}C$에서는 포고 300mm 이하로, $80^{\circ}C$에서는 15mm를 각각 나타내어 양호한 저기포성 정련제임이 입증되었다.

• 한국염색가공학회지
• /
• 제19권4호
• /
• pp.10-17
• /
• 2007

Chitosan(CS) and cellulose acetate(CA) composite films were prepared using formic acid as a cosolvent by casting, solvent evaporating and neutralization method. This study examines if the blending method, which uses formic acid as a cosolvent is efficient in improving the mechanical properties of CS film, especially wet strength and elongation. Formic acid is an effective cosolvent for the blend of CS and CA. Under wet condition, tensile strength and elongation of the composite films were obviously higher than those of the films made from pure CS. FTIR, DSC, and X-ray diffraction showed that the composite films exhibit a high level of compatibility and that strong interaction between the CS and CA was caused by intermolecular hydrogen bonding. The affinity series of composite film to transition metal ions are Cu(II) > Cd(II) > Cr(III). The adsorption of Cu((II) ion was shown to be highly pH sensitive.

• Elastomers and Composites
• /
• 제43권2호
• /
• pp.104-112
• /
• 2008

통상적인 고무블렌드 방법에 따라 개방식 2-롤밀을 사용하여 ethylene propylene diene terpolymer (EPDM)과 styrene butadiene rubber (SBR) 블렌드 배합물을 제조하여, 이들의 경화 특성, 기계적 성질 및 내오존성 등을 검토하였다. SBR함량이 증가할수록 가황곡선의 토크가 증가하였다. 최대 토크는 SBR 25wt% 일 때 가장 낮았으며 그 이상의 SBR 량에서는 직선적으로 증가하였다. 스코치시간 및 최적경화시간은 SBR고무 함량이 증가함에 따라 감소하였다. 경도는 SBR 함량이 50wt% 일 때 최고값을 보였으며 그 전후에서는 감소하는 경향을 보였다. 내오존시험에 있어서 소량의 EPDM 고무의 첨가에 의하여 내오존성이 크게 개선됨을 확인할 수 있었다.

• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2010년도 제42차 하계학술발표논문집 18권2호
• /
• pp.23-26
• /
• 2010

본 논문은 웹 기반 3D 패션몰 설계 기법 및 구현 방법에 대해 제한한다. 웹 3D 패션몰은 마우스 조작이 쉬운 Web3D 저작툴인 ISB로 구현하였고, 3D 인체 모델과 의상 아이템 모델은 3D MAX를 이용하여 로폴리곤 모델링으로 제작하였고, 생성된 3D 인체 모델과 의상 아이템 모델을 XML 형식으로 출력시켜 저장한 후, Direct3D를 이용하여 제작된 ActiveX 컨트롤을 사용하여 웹상에서 3D 인체 모델과 의상 아이템 모델의 정합과 애니메이션을 구현하였다. 또한 텍스타일 팔레트를 제작하여 의상 아이템 모델에 맵핑하는 과정을 알파블렌딩 기법을 적용하여 구현하였다.

• 한국응용과학기술학회지
• /
• 제10권2호
• /
• pp.35-40
• /
• 1993

Alkaline cleaning agent(ACA) was prepared by blending of POE(4)octadecylmine(S-204), $Na_2CO_3$, sodium orthosilicate(Na-OSi). Tetronix T-701(T-701), and MJU-100A. The physical properties of ACA tested with steel specimen showed the following results. The cleaning powers of ACA-6(S-204 80g/$Na_2CO_3$, 160g/Na-OSi, 80g/T-701, 60g/MJU-100A, 20g mixture) for press-rust preventing oil was 98% and 99% degreasing at 2wt%, $70^{\circ}C$ and $90^{\circ}C$, respectively : for quenching oil, the cleaning power of ACA-6 was 95% degreasing at 2wt% and $70^{\circ}C$. From these results, it was ascertained that ACA-6 exhibited a good cleaning power. Foam heights measured immediately after foaming by Ross & Miles method and Ross & Clark method at 3wt%. $60^{\circ}C$ were 17mm and 40mm, respectively. As the result, ACA-6 was proved a good low foaming cleaning agent.

• Journal of Power Electronics
• /
• 제13권1호
• /
• pp.170-176
• /
• 2013

Power converters produce a vast range of harmonics, subharmonics and interharmonics. Harmonics analyzing tools based on the Fast Fourier Transform (FFT) assume that only harmonics are present and the periodicity intervals are fixed, while these periodicity intervals are variable and long in the presence of interharmonics. Using FFT may lead to invalid and undesired results due to the above mentioned issues. They can also lead to problems such as frequency blending, spectral leakage and the picket-fence effect. In this paper, the group-harmonic weighting (GHW) approach has been presented to identify the interharmonics in a power system. Afterwards, a modified GHW has been introduced to calculate the proper bandwidth for analyzing the various values of interharmonics. Modifying this method leads to more precise results in the FFT of a waveform containing inter harmonics especially in power systems with a fundamental frequency drift or frequency interference. Numerical simulations have been performed to prove the efficiency of the presented algorithm in interharmonics detection and to increase the accuracy of the FFT and the GWH methods.

• 한국염색가공학회지
• /
• 제29권2호
• /
• pp.62-68
• /
• 2017

Coffee sludge and onion shells are known typically as waste resources as well as simultaneously being the raw material for dye having a golden brown color. This research studies the dyeability, functionality, and colors of woolen fabric after being dyed by different dyeing method using coffee sludge and onion shells extract. The woolen fabric was refined and pre-mordanted with tannin. The dyeing process conducted was single-dye, using coffee sludge and onion shells extract, sequential multi-dye, consecutively dyeing with coffee sludge and onion shells, and mixed-dye, blending coffee sludge extract and onion shells extract to dye. The dyeing was measured on the surface color, color fastness, and UV-protection ability. As a result, the expression of various hues of tan using coffee sludge and onion shells extract were shown to be possible. Additionally, single-dye, sequential multi-dye, mixed-dye had generally superiority in color fastness to light, all rating 3 and color fastness to washing, rating 3 or 4, showing relatively stable color fastness to washing. The UV protection ability was shown to be better, especially appearing satisfactory in the UV-B protection, all measured to be over 90%.

• 한국응용과학기술학회지
• /
• 제19권2호
• /
• pp.117-122
• /
• 2002

A silicone softner (SS-5), a permanent press (PP) finish, was prepared by blending silicone oil KF-96 (as a lubricating component) and beef tallow hardened oil (as a softening component) which was synthesized from fatty polyamide salts. The prepared SS-5 and the PP finishing resin were applied to PP finishing cotton cloth and P/C gingham sample by one-bath method. The properties such as crease recovery, tear strength, and bending resistance were tested. The samples treated with SS-5 and PP finishing resin showed improved properties when comparing with the untreated ones, with the ones treated only with PP finishing resin, with ones treated with commercial PP finishing softners and PP finishing resin. The grades of fabric samples treated with 3% SS-5 were fifth grade in the bending resistance test.

• 한국환경보건학회지
• /
• 제47권1호
• /
• pp.55-63
• /
• 2021

Objectives: Cefotaxime is an antibiotic used to treat several bacterial infections. Specifically, it is used to treat pelvic inflammatory disease, meningitis, pneumonia, urinary tract infections, and sepsis. It is given by injection into either a vein or muscle. Antibacterial polymers prepared by chemical bonding and simple blending of antibacterials into polymers has attracted much interest because of their long-lasting antibacterial activity. This study attempted to review the possibility of hydrogel films as functional antibacterial materials by antimicrobial activity. Methods: In this study, CTX-PAA was synthesized by the chemical reaction of polyacrylic acid with cefotaxime by N,N'-Dicyclohexylcarbodiimide (DCC) method. Synthetic antibacterial hydrogel films were then prepared with PVA and CTX-PAA for functional application. Results: The increase in the cefotaxime content of the hydrogel films showed a similar decrease in tensile strength and elongation. The values of films impregnated with chemically bonded cefotaxime showed no significant difference. Antibacterial susceptibility was determined against Streptococcus pneumoniae and Escherichia coli using a standardized disc test. Conclusion: The synthetic antibacterial hydrogel films exhibited broad susceptibility against Streptococcus pneumoniae and Escherichia coli. Notably, the antibacterial effect of antibacterial hydrogel films against Grampositive (Streptococcus pneumoniae) was superior to that against Gram-negative (Escherichia coli).

• 한국재료학회지
• /
• 제33권8호
• /
• pp.323-329
• /
• 2023

There are many types of foam molding methods. The most commonly used methods are the pressure foaming method, in which foam resin is mixed with a foaming agent at high temperature and high pressure, and the normal pressure foaming method, which foams at high temperature without pressure. The polymer resins used for foaming have different viscosities. For foaming under normal pressure, they need to be designed and analyzed for optimal foaming conditions, to obtain resins with low melt-viscosity or a narrow optimal viscosity range. This study investigated how changes in viscosity, molding temperature, and cross-link foaming conditions affected the characteristics of the molded foam, prepared by blending rubber polymer with biodegradable resin. The morphologies of cross sections and the cell structures of the normal pressure foam were investigated by SEM analysis. Properties were also studied according to cross-link/foaming conditions and torque. Also, the correlation between foaming characteristics was studied by analyzing tensile strength and elongation, which are mechanical properties of foaming composites.