• 한국가구학회지
• /
• 제17권3호
• /
• pp.87-94
• /
• 2006

The purpose of this study was to evaluate the relationships between the mixing ratio and water vapor sorption property of charcoal-based loess composites for furniture & building materials with environmental friendly. Charcoal-based loess composite can be easily made by blending method with water. But the composites had much brittle fracture pattern with the increase of charcoal content. That is due to the lack of loess that takes linkage role of composites. In water vapor sorption properties, adsorption ability of charcoal was about six times higher than that of loess. Therefore, vapor sorption ability was maximum at the mixture ratio of charcoal 80% and loess 20%. It is considered that wood charcoal based inorganic composite materials can be used for various purposes as a building interior & exterior and furniture members.

• Macromolecular Research
• /
• 제12권5호
• /
• pp.466-473
• /
• 2004

We have used FT-IR spectra to explain the effects of hydrogen bonding between chitosan and polycaprolactam (PA6). A dynamic mechanical analysis study suggested that the optimum chitosan and PA6 miscibility under the conditions of this experiment were obtained at a blending ratio of 40:60. We studied the thermal degradation of chitosan blended with PA6 (chitosan/PA6) by thermogravimetric analysis and kinetic analysis (by the Ozawa method). Dry chitosan and PA6 exhibited a single stage of thermal degradation and chitosan/PA6 blends having> 20 wt% PA6 exhibited at least two stages of degradation. In chitosan/PA6 blends, chitosan underwent the first stage of thermal degradation; the second stage proceeded at a temperature lower than that of PA6, because the decomposition product of chitosan accelerated the degradation of PA6. The activation energies of the blends were between 130 and 165 kJ/mol, which are also lower than that of PA6.

• 한국응용과학기술학회지
• /
• 제18권3호
• /
• pp.180-185
• /
• 2001

Antibiotics polymer prepared by chemical bonding and simple blending of antibacterial into polymers have attracted much interest because of their long-lasting and antibacterial activity. Antibiotics polymer can significantly reduce losses associated with dissolution, photolytic decomposition and volatillization. Further more, increased efficiency safety and selectivity are additional benefits which may be realized. In this study, Antibiotics polymer was synthesized by chemical reaction of polyacrylic acid with sulfamethazine by N,N'-dicyclohexylcarbodiimide(DCC) method. Antibacterial susceptibility was determined against Streptococcus pyrogenes[gram(+)] and Esherichia coli.[gram(-)] using a standardized disc test. As a result, the synthetic antibiotics polymer exhibited the broad susceptibilty against Streptococcus pyrogenes and Esherichia coli. Especially, the antibiotic effect of antibacterial polymer against Gram negative(Esherichia coli) was much stronger than that against Gram positive(Streptococcus pyrogenes).

• Journal of Ship and Ocean Technology
• /
• 제9권1호
• /
• pp.47-63
• /
• 2005

In the present study, we suggest a new method for designing complex ship hull forms with multiple domain B-spline surfaces accounting for their topological arrangement, where all subdomains are fully defined in terms of form parameters, e.g., positional, differential and integral descriptors. For the construction of complex hull forms, free-form elementary models such as forebody, afterbody and bulbs are united by Boolean operation and blending surfaces in compliance with the sectional area curve (SAC) of the whole ship. This new design process in this paper is called Sectional Area Curve-Balanced Parametric Design (SAC-BPD).

• 전기학회논문지
• /
• 제58권2호
• /
• pp.373-381
• /
• 2009

In this paper, a humanoid robot is simulated and implemented to walk up a staircase using the blending polynomial and genetic algorithm. Using recently developed kinematics for a biped robot, four schemes for walking up a staircase are newly proposed and simulated separately. For the two schemes of landing a swaying leg on the upper stair, the joint trajectories of seven motors are particularly optimized to generate an energy-minimal motion with the guarantee of walking stability. The proposed scheme of walking upstair is validated by an experiment with a small humanoid robot.

• Elastomers and Composites
• /
• 제53권3호
• /
• pp.168-174
• /
• 2018

Natural rubber (NR) and bromo-isobutylene-isoprene rubber (BIIR) were compounded with other formulation chemicals through polymer blending via a mechanical mixing method. After rubber vulcanization by hot-press compression molding, the cure characteristics, mechanical properties, and ozone resistance of the NR/BIIR blends were measured. As the BIIR content increased, the maximum torque of the blends decreased, while the optimum cure time and scorch time tended to increase. Furthermore, the hardness of the blends increased with increasing BIIR content, reaching the maximum value at 75 wt% BIIR, and decreased with a further increase in the BIIR loading. The tensile strength and elongation at break decreased with an increase in the BIIR content, reaching the minimum value at 75 wt% BIIR, and increased with a further increase in the BIIR content. In the ozone resistance test, cracks were not generated when the BIIR content was more than 75 wt%.

• Elastomers and Composites
• /
• 제27권3호
• /
• pp.183-193
• /
• 1992

Compared with NR and HNBR compounds, the blend properties of NR/HNBR were studied. The heat, oil and ozone resistance of NR compounds were improved by blending HNBR, and these effects were more clearly revealed with elevating temperatures. For the overall stabilities of the compounds, it was resonable to use the carbon black under the 60phr. In the EV systems, high-saturated NR/HNBR and HNBR compounds showed similar total crosslink density in comparison with NR compounds. Interaction parameters calculated by stress-strain method showed widely varied value.

• Journal of Electrical Engineering and Technology
• /
• 제13권5호
• /
• pp.1996-2003
• /
• 2018

In this paper, the design and characteristic analysis of a novel single-phase hybrid switched reluctance motor (HSRM) for the purpose of replacing the universal motor in commercial blenders are presented. The proposed motor is easy to manufacture due to its simple yet robust structure with minimized power switches and no torque dead-zone. Moreover, the proposed HSRM is able to deliver a high starting torque as a requirement for blending hard food or even ice. The stator has permanent magnets (PMs) mounted on its inner surface and the rotor has a wide pole arc and salient poles that contribute to its high starting torque profile and the elimination of the torque dead-zone. Finite element method (FEM) is used to analyze the characteristic of the proposed motor. Finally, the prototype is manufactured and its performance is verified through experiments.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2005년도 한국컴퓨터종합학술대회 논문집 Vol.32 No.1 (A)
• /
• pp.688-690
• /
• 2005

본 논문은 2D 실사 기반 가상 헤어스타일의 자연스런 착용감을 제공하기 위한 것으로, 가상 헤어스타일러의 모발 블렌딩 방법에 관한 것이다. 제안된 방법을 2D 실사 영상에서 추출한 헤어스타일을 임의의 인물 영상의 두상에 정렬시킨 상타에서 원래의 헤어스타일에서 추출한 헤어스타일로 변해가는 반자동 필드 모핑을 수행할 시에 머리모양의 변형을 따라 단계적으로 변하는 가변 모핑 마스크를 사용하여 가상 헤어스타일을 생성하고 이렇게 생성된 헤어스타일을 가변 모핑 마스크의 경계 영역에서 시그모이드 함수에 기반한 모발 블렌딩을 수행함으로써 이중 노출 현상이 제거됨과 동시에 자연스러운 착용감을 제공하는 여러 유형의 헤어스타일을 자동으로 생성할 수 있다. 통상 이러한 작업은 사용자의 수작업에 전적으로 의존하는 반면에 제안된 방법은 반자동 필드 모핑에 기반한 편리한 사용자 인터페이스를 제공할 수 있기 때문에 반자동화를 통해 작업 피로도와 작업 시간을 경감시킬 수 있고 비숙련자도 간단한 사용자 입력을 통해 이중 노출 현상이 제거됨과 동시에 자연스런 착용감을 제공하는 가상 헤어스타일을 생성할 수 있는 이점이 있다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 추계학술대회 논문집
• /
• pp.65-68
• /
• 2000

Polyethylene, has long history and is widely used, was researched due to good electrical properties by many authors. But PE under stress has the critical defects of space charge accumulation and tree growth, so various methods such as catalyst, additives and blend to improve these problems have been execute, of which we selected blending method. As in our previous papers we investigated electrical conduction, dielectric and AC dielectric breakdown characteristics, we did DC dielectric breakdown characteristics in this paper. We selected pure LLDPE, pure EVA and LLDPE films mixed with EVA as specimens, which were mixed with the weight percentages of 50, 60, 70 and 80[wt%] to be thin film. DC applying voltage speed was 500[V/sec]. The relation between dielectric breakdown characteristics and the variations of super structure due to mixing was investigated, and especially trap level at amorphous region, threshold energy increment of conductive electron at free volume were considered.