• Journal of the Korean Electrochemical Society
• /
• v.19 no.3
• /
• pp.101-106
• /
• 2016

In this study, we prepared an ionic liquid composite solid polymer electrolyte (PEO-LiTFSI-$Pyr_{14}TFSI$) with poly(ethylen oxide), lithium bis(trifluoromethanesulfonyl)imide, N-butyl-N-methylpyrrolidinium bis(trifluoromethanesulfonyl)imide by blending-cross linking process. Although the PEO-LiTFSI-$Pyr_{14}TFSI$ composite solid polymer electrolyte displayed a small peak at 4.4 V, it had high electrochemical oxidation stability up to 5.7 V. Ionic conductivity of the PEO-LiTFSI-$Pyr_{14}TFSI$ composite solid polymer electrolyte increased with increasing temperature from $10^{-6}S\;cm^{-1}$ at $30^{\circ}C$ to $10^{-4}S\;cm^{-1}$ at $70^{\circ}C$. To investigate the electrochemical properties, the PEO-LiTFSI-$Pyr_{14}TFSI$ composite solid polymer electrolyte assembled with $LiFePO_4$ cathode and Li-metal anode. At 0.1 C-rate, the cell delivered $40mAh\;g^{-1}$ for $30^{\circ}C$, $69.8mAh\;g^{-1}$ for $40^{\circ}C$ and $113mAh\;g^{-1}$ for $50^{\circ}C$, respectively. The PEO-LiTFSI-$Pyr_{14}TFSI$ solid polymer electrolyte exhibited good charge-discharge performance in Li/SPE/$LiFePO_4$ cells at $50^{\circ}C$.

• Proceedings of the Membrane Society of Korea Conference
• /
• 2003.11a
• /
• pp.154-154
• /
• 2003

세계의 특허동향을 분석해 보면 수처리용 MF/UF 분리막의 제조 및 응용에 관한 연구개발이 매우 활발하게 진행되어져 왔음을 알 수 있다. 또한 다국적 기업들의 적극적인 마케팅과 분리막 공법의 우수한 처리효율이 인정되면서 90년대 후반부터는 수십만톤/일 규모의 징수처리 및 하수고도처리 분야에까지 MF/UF 분리막이 괄목할만한 수요의 증대를 보이고 있으며 이러한 추세는 앞으로도 더욱 확대될 것으로 전망이 되고 있다. 고분자재료를 이용하여 MF/UF 분리막을 제조하는 방법으로는 보편적으로 첫째, 고분자를 용매에 녹인 후 용매와 비 용매간의 상호교환을 유도하여 분리막을 제조하는 상전이법(Phase Inversion). 둘째, 고분자를 고온에서 희석제와 melt-blending 한 후 가해진 열을 제거하면서 상분리를 일으켜 다공성을 부여하는 열유도 상분리법(TIPS, Thermally Induced Phase Separation). 셋째, 결정성 고분자를 용융, 압출 및 냉각하여 결정화도가 매우 높은 전구체를 제조한 후 연신에 의해 비결정 영역을 개열시켜 기공을 형성하는 연신법(Stretching process)이 있다. 이 중 물성이 매우 우수한 폴리올레핀계 결정성 고분자를 이용하여 분리막을 제조할 수 있는 방법은 열유도 상분리법 및 연신법에 제한된다. 본 연구 발표에서는 세계적으로도 극소수의 기업들만이 보유하고 있으며 고도로 축적된 노하우를 필요로 하는 열유도 상분리법 및 연신법에 의하여 폴리프로필렌 및 폴리에틸렌 중공사막을 제조하는 방법과 이 두 가지 방법에 의해서 제조된 중공사막의 구조, 물성 및 수투과 성능 그리고 KMS 중공 사막의 응용사례를 통한 실제 운전특성 등을 소개하고자 한다.좋은 결과를 가져다 주는 술식으로 판단되었다.결과를 이용하여 향후 전개될 홈 네트워크 서비스 및 관련시장의 발전 방향을 전망해 보고 이에 따른 기업이나 정부차원의 대응전략을 파악하고자 한다.육구에서는 큰 변화를 나타내고 있지 않았다(p<0.05). 운동과 비운동시킨 참돔의 지질 함량의 변화는 운동시킨 참돔은 운동으로 인한 에너지 소비로 인하여 함량이 유의적으로 감소했으며(r=-0.35), 비운동사육구에서는 절식으로 인하여 지질함량이 감소하였다(r=-0.38). 파괴강도와 가장 밀접한 영향을 가지는 콜라겐은 운동과 비운동 모두 사육기간동안 큰 변화는 보이지 않았다. 초기의 파괴강도값은 1.45±0.02kg(운동사육구), 1.36±0.18kg(비운동사육구)이였으며 사육기간동안 운동사육구는 파괴강도값이 증가한 반면, 비운동수조에서는 참돔의 파괴강도는 사육기간동안 큰 유의차가 없었다. 각 성분간의 상관도를 살펴보면, 수분함량과 파괴강도는 상관성을 가졌으며, 지질함량과 파괴강도도 같은 경향은 나타내었다. 운동기간동안의 파괴강도와 콜라겐 사이에는 상관성의 거의 없었다. 이는 운동기간에 따른 파괴강도의 증가가 콜라겐의 함량의 증가보다는 지질함량의 감소와 수분함량의 증가와 같은 성분과의 상관성이 크다고 판단된다. 다음으로는, 운동횟수에 의한 영향으로써 운동시간을 1일 6시간으로 설정하여, 운동횟수를 결정하기 위하여 오전, 오후에 각 3시간씩 운동시키는 방법과 오전부터 6시간동안 운동시키는 두 방법을 이용하여 품질을 비교하였다. 각 조건에 따라 운동시킨 참돔의 수분함량을 나타낸 것으로, 2회(오전 3시간, 오후 3시간)에 나누어서 운동시키기 위한 육의 수분함량은 73.37±2.02%를 나타냈으며, 1회(6시간 운동)

• Applied Chemistry for Engineering
• /
• v.8 no.6
• /
• pp.920-926
• /
• 1997

The catalytic glycolysis process is the method of chemical recycling where the polyol and carbamate compounds recovered by transesterification reaction are reused to produce new polyurethane foams. In this work, ethylene glycol, diethylene glycol, and 1,4-butanediol were used to decompose polyurethane foams and various metallic acetates were provided as catalysts. The catalytic glycolsis of polyurethane foams was taken place in the reaction temperature of $180{\sim}200^{\circ}C$. The reaction rates of catalytic glycolysis reaction were indicated by the viscosity of the reaction products at different reaction times. IR and GPC analysis showed the types and the molecular weight distributions of the products. The catalytic glycolysis was profitable for using ethyleneglycol at high temperature. The activities of the catalysts are suitable for K, Na, Tl acetate, and the products are composed of comparatively high-contained amine compounds and carbamate compounds. In the case of Sr acetate and Quinoline, the reaction rate was somewhat low. However, the content of polyol was high and the content of the side-products was low. The foams which were prepared by blending up to 20wt% of recovered polyol with virgin polyols showed better physical properties in tensile strength, hardness, tear strength, and compressive strength compared to those of polyurethane foams from virgin polyol.

• The Journal of Engineering Geology
• /
• v.5 no.2
• /
• pp.193-200
• /
• 1995

It has been well known that the alkali-aggregate reaction between the aggregates and cement paste is one of the reasons of a concrete siructre expansion. Because of a serious demage on the concrete stnicture from the expansion, in many countries, the safety of the materials is checked in laboratory by mortar-bar test and the upper limit of expansion in length is 0.1%. The prescriptions are presented in the ASTM C227 and 490 of U.S. which has been international currency and in the KS Handbook F2503, F2546 and L5107 of Korea published by Korean Standards Association. Both of the prescriptions are almost same in their contents. Actually, in the process of preparing and measuring the mortar-bar according to the prescription mentioned above, it seems that there are no problems for its own purpose but a few points are found to be improved upon the methods to increase the accuracy for laboratory work as follows. 1. The prescription of blending ratio(aggregate, cement and water) should be noted by volume not by weight. 2. It is unreasonable to measure the initial length of mortar bars after 24$\pm$2 hours at once regardless the kind of aggregates. 3. It may bring about errors in calculating the expansion ratio under the condition of the denominator value fixed as 254mm. 4. The measuring methods of specific gravity are selected according to the purposes but the pure specific gravity displays the highest accuracy among them.

• Korean Journal of Environmental Agriculture
• /
• v.3 no.1
• /
• pp.57-62
• /
• 1984

Laboratory experiments of poultry manure incubated for three days at $35^{\circ}$ were conducted to learn some informations on the relief of nitrogen loss during processing. Results obtained are as follows: 1) Blending phosphoric acid, triplesuperphosphate or superphosphate to poultry manure could reduce the volatilization of ammonia and saved nitrogen in the manure by 80 to 90 percent, though nonblending saved the nitrogen only by 40 to 60 percent during three days incubation. 2) The additives must be blended thoroughly to the manure to obtain the least loss of nitrogen during the incubation. 3) The severe loss of nitrogen was occurred from the drying process of fermented manure of both treatment, that is $60{\sim}80$ percent loss at the blended treatment with phosphoric acid, triplesuperphosphate or superphosphate, and $70{\sim}90$ percent loss at non-blended. 4) Drying the fermented manure under the fixed temperature of about $65^{\circ}$ for three days saved more nitrogen than dried manure under the temperature gradually raised from the room temperature to about $45{\sim}65^{\circ}$ for three days.

• Korean Chemical Engineering Research
• /
• v.53 no.3
• /
• pp.282-288
• /
• 2015

A new energetic thermoplastic elastomer based on the azidated polybutadiene(Az-PBD)/ethylene vinyl acetate copolymer (EVA) blends was prepared, and structure and properties of the blends were invetigated by SEM, DSC, DMA, tensile testing and combustion test. The Az-PBD was synthesized via a two-step process involving the addition reaction of commercially available 1,2-PBD with $Br_2$ and subsequent nucleophilic substitution reaction of the brominated PBD with $NaN_3$. EVA/Az-PBD with 90/10, 80/20, 70/30 (wt/wt) was prepared by a solution blending. SEM, DSC, and DMA results revealed that the blends are partially compatible and Az-PBD is dispersed in continuous EVA matrix. Tensile test showed that modulus and tension set increased while elongation-at-break of the blends decreased with increasing Az-PBD content in the blends, but all the blends showed a elongation at break as high as 700% and a tension set of less than 5%, indicating that the blends are typically elastomeric. Combustion test showed that, with increasing Az-PBD content in the blend, higher energy can be released.

• Membrane Journal
• /
• v.19 no.4
• /
• pp.341-347
• /
• 2009

Nanohybrid based on environmentally friendly and biodegradable polymer, poly propylene carbonate (PPC) and cloisite 20B (PPC/C-20B) have been synthesized by solution blending method and their morphology, thermal and water absorption properties have been evaluated. The structure of PPC/C-20B nanohybrid was confirmed by X-ray diffraction (XRD). The thermal property of PPC and PPC/C-20B nanohybrid were investigated by thermal gravimetric analysis (TGA) and differential scanning calorimetric (DSC). The experimental results demonstrated that nanohybrid showed the highest thermal stability in TGA and DSC. TGA tests revealed that the thermal decomposition temperature ($T_{d50%}$) of the nanohybrid increased significantly, being $23^{\circ}C$ higher than that of pure PPC while DSC measurements indicated that the introduction of 5 mass% of clay increased the glass transition temperature from 21 to $30^{\circ}C$. Further the water absorption capacity of the PPC was significantly decreased by the incorporation of clay. Water absorption cause degradation of the coating by the moistures and affect the physical and mechanical performance. This result indicates that organic modifiers have effect on thermal and water absorption capacity of PPC and are of importance for the practical process and application of PPC.

• Korean Journal of Food Science and Technology
• /
• v.53 no.5
• /
• pp.593-600
• /
• 2021

In this study, the vacuum distillation process for producing non-alcoholic red wine was optimized via response surface methodology. As a result of optimizing the responses (alcohol content, yield) for independent variables (operating time, boiling point, and temperature difference), 1% alcohol content and 81.15% yield were obtained at an operating time of 24.5 min, boiling point of 65℃, and temperature difference of 8℃. To investigate the physicochemical and sensory properties, non-alcoholic wines with different boiling points (bp 25℃, bp 45℃, and bp 65℃) and a blended wine (4.2% of control wine added) were prepared. As the boiling point increased, the alcohol content decreased, and CI (color intensity) and Hue increased. Blended wine exhibited the highest value and bp 65℃ showed the lowest value in terms of sensory properties. In conclusion, distillation at a low boiling point and blending control wine could be used to prepare non-alcoholic wine with a high preference.

• Korean Chemical Engineering Research
• /
• v.60 no.4
• /
• pp.582-587
• /
• 2022

Biphasic solvents are attracting attention as energy-reducing solvents for capturing CO₂ from flue gas in combustion process. In this study, considering diethylenetriamine (DETA) and diethylethanolamine (DEEA) mixed solvents, one of the biphasic solvents by blending of two types of amines, the CO₂ absorption rates of DETA and DEEA was measured by wetted wall column. The effects of DETA and DEEA concentrations and operating temperature on the overall mass transfer coefficient were investigated. As a result, the overall mass transfer coefficient was proportional to the DETA concentration. However, in the case of the DEEA concentration, the effect was small and when the concentration was exceeded, the overall mass transfer coefficient decreased. The DETA aqueous solution showed little change in the overall mass transfer coefficient with the operating temperature, whereas the DEEA aqueous solution increased the overall mass transfer coefficient with the operating temperature. As a result of obtaining the observed reaction rate constant under the pseudo-first-order reaction assumption, it was found that the observed reaction rate constant in DETA aqueous solution was proportional to the DETA concentration, but DEEA did not fit the pseudo-first-order reaction assumption.

• International Journal of Advanced Culture Technology
• /
• v.10 no.3
• /
• pp.174-183
• /
• 2022

The abstract should summarize the contents of the paper and written below the author information. Use the word "Abstract" as the title, in 12-point Times New Roman, boldface type, italicized, centered relative to the column, initially capitalized, fixed-spacing at 13 pt., 12 pt. spacing before the text and 6 pt. after. The abstract content is to be in 11-point, italicized, single spaced type. Leave one blank line after the abstract, and then begin the keywords. All manuscripts must be in English. When it comes to the issue of "virtual and real" in traditional Chinese painting, the first impression is to describe the problems of painting strokes and ink, layout of pictures, etc., but it runs through the initial conception of the work, creation in the middle and aesthetic appreciation of the work. It exists in the whole process of artistic creation and appreciation. In essence, it is a problem of aesthetic thinking and philosophical thinking. Because the traditional Chinese painting theory is influenced by Taoism, when the concept of "virtual and real" is implemented in the specific picture of Chinese painting, it is contained in the specific shape of "physics", that is, the painting theory research of "blank space" in the picture. Based on the traditional Taoist philosophy of China, this paper takes the "virtual and real" view in Lao Zhuang's thought as the research object, deeply analyzes and compares its relationship with the "virtual and real" in Chinese landscape painting, and finds out their artistic spirit, essential characteristics and how to present them. This paper mainly discusses the internal relationship between Taoist philosophy and "virtual and real" in Chinese landscape painting from the following aspects. The introduction expounds the origin, purpose, significance, innovation and research methods of the topic. This paper analyzes the philosophical thoughts about landscape in the philosophical thoughts represented by Lao Tzu and Zhuangzi. The development of Chinese traditional aesthetics theory is closely related to Taoist philosophy, which has laid the foundation and pointed out the direction for the development of Chinese painting theory since ancient times. It also discusses the influence of the Taoist philosophy of "the combination of the virtual and real" on the emergence and development of the artistic conception of landscape painting. Firstly, through the analysis of the artistic conception of landscape painting and its constituent factors, it is pointed out that the artistic conception is affected by the personality and the painting artistic conception. Secondly, through the Taoist thought of "the combination of the virtual and real" in landscape painting, so as to reflect that it is the source of the artistic conception of Chinese landscape painting. It is the unique spiritual concept of "Yin and Yang" and "virtual and real" that creates the unique "blank space" aesthetic realm of Chinese painting in the composition of the picture. Finally, it focuses on the "nothingness" in Taoist philosophy and the "blank space" in Chinese landscape painting. The connotation of the "blank space" in Chinese painting exceeds its own expressive significance, which makes the picture form the aesthetic principle of emotional blending, virtual and real combination and dynamic and static integration. Through the "blank space", it deepens the artistic characteristics of the picture and sublimates the expression of "form" in Chinese painting.