• Journal of the Korean Magnetics Society
• /
• v.12 no.3
• /
• pp.88-93
• /
• 2002

Rapidly solidified NdFeB powders were mixed with fine powders of pure metal elements before CA-press employed to obtain a fully dense isotropic precursor. Subsequently, the precursor was deformed by CA-deformation to obtain an anisotropic magnet. The CA-deformed anisotropic NdFeB magnets with 0.3 wt.% Zn or Sn exhibited the coercivities about 80% higher (11.4. and 11.2 kOe, respectively) than that (6.4 kOe) of the additive-free magnet.

• Journal of Welding and Joining
• /
• v.32 no.5
• /
• pp.65-71
• /
• 2014

Atmospheric plasma spraying (APS) is world-widely used process in the automotive industry as a method to provide wear resistance coatings for engine cylinder bore, using various materials. The weight of engine blocks can be considerably decreased by removing cast iron liners, which can finally result in the improvement of fuel efficiency. In this study, five kinds of powder materials, 1.2C steel powder and 1.2C steel powder mixed with 5, 10, 15, 20 wt.%. molybdenum powder, were deposited by atmospheric plasma spraying in order to investigate the effect of molybdenum on the wear resistance of coatings. Microstructural analysis showed that molybdenum splats were well distributed in 1.2C steel matrix with intimate bonding. The molybdenum added coatings showed better tribological properties than 1.2C steel coating. However, above the 15 wt.%. blending fraction, wear resistance was somewhat degraded with poor roughness of worn surface due to the brittle fracture occurred in molybdenum splats. Consequently, compared to conventional liner material, gray cast iron, 10 wt. pct. molybdenum blended 1.2C steel coating showed much better tribological properties and therefore it looks very feasible to replace gray cast iron liner.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.41 no.3
• /
• pp.517-526
• /
• 2017

The biodegradation and water absorption properties of lignin/poly(vinyl alcohol) (PVA) nanofibrous webs are investigated. Lignin/PVA nanofibrous webs containing 0, 50, and 85wt% of lignin were prepared via an electrospinning process to observe the effect of the lignin concentration on the biodegradability and water absorption properties of lignin/PVA nanofibrous webs. The morphology of the materials was examined by field emission scanning electron microscopy (FE-SEM) and atomic force microscopy (AFM). To understand the wetting behavior and hydrophilic nature of the electrospun lignin/PVA nanofibrous webs, the water absorbency, contact angle, and water uptake were examined. The enzymatic degradation of lignin/PVA nanofibrous webs was investigated using laccase by measuring total organic carbon (TOC) concentration over a course of 50 days. Water drops were absorbed immediately into all of the specimens. The water uptake of lignin/PVA nanofibrous webs increased as the amount of PVA in the lignin/PVA hybrid webs increased. The enzymatic degradation experiment indicated that the inherent biodegradability of lignin was retained after its transformation into nanofibers. Our findings imply that blending these two types of polymers is promising because it can lead to the development of a new range of multifunctional materials such as antimicrobial absorbent nanotextiles based on sustainable biopolymers.

• Journal of the Korean Society of Tobacco Science
• /
• v.24 no.1
• /
• pp.21-26
• /
• 2002

This study was carried out to evaluate the effect of forced fermentation on chemical and sensory properties in burley leaf tobacco. Three process steps of burley leaf tobacco(green and redried leaves produced in 2000, and aged leaves in 1998) and four grades(BlT, B2T, C1W and C2W) of leaf for every step were used in this study. The leaves were moistened by 22% moisture content, packed under 200kg/㎥ condition and stored in chamber controlled 6$0^{\circ}C$ and 90% R.H. for 7 days. Nicotine contents in three steps of burley leaf tobacco were significantly decreased by forced fermentation. Except for aged leaf, pH values of green and redried leaves were significantly lowered. Nicotine, tar and CO contents of cigarette smoke showed little difference between cigarettes containing 23%, 26% and 29% of fermented burley leaf and controlled cigarette(containing 19% of aged burley leaf). The cigarette containing 26% of the redried and fermented leaf was significantly better taste and less irritation than controlled cigarette. The results suggest that the forced fermentation may be useful to increase the rate of burley tobacco in leaf blending and to shorten the period of storage for aging.

• Macromolecular Research
• /
• v.13 no.1
• /
• pp.19-29
• /
• 2005

Polymer composites based on a thermotropic liquid-crystalline polymer (TLCP) and poly(butylene terephthalate) (PBT) were prepared using a melt blending process. Polymer composites consisting of bulk cheap polyester with a small quantity of expensive TLCP are of interest from a commercial perspective. The interactions between the PBT chains and the flexible poly(ethylene terephthalate) (PET) units in the TLCP phase resulted in an improvement in the compatibility of PBT/TLCP composites. TLCP droplets deformed and fragmented into smaller droplets in the PBT/TLCP composites, which resulted in TLCP fibrillation through the effective deformation of the TLCP droplets. The nucleation activities of the PBT/TLCP composites increased by adding even a small amount of the TLCP component.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.3
• /
• pp.135-140
• /
• 2016

In this study, we developed the solution-processed PMMA-$HfO_x$ hybrid ReRAM devices to overcome the respective drawbacks of organic and inorganic materials. The performances of PMMA-$HfO_x$ hybrid ReRAM were compared to those of PMMA- and $HfO_x$-based ReRAMs. Bipolar resistive switching behavior was observed from these ReRAMs. The PMMA-$HfO_x$ hybrid ReRAMs showed a larger operation voltage margin and memory window than PMMA-based and $HfO_x$-based ReRAMs. The reliability and electrical instability of ReRAMs were remarkably improved by blending the $HfO_x$ into PMMA. An Ohmic conduction path was commonly generated in the LRS (low resistance state). In HRS (high resistance state), the PMMA-based ReRAM showed SCLC (space charge limited conduction). the PMMA-$HfO_x$ hybrid ReRAM and $HfO_x$-based ReRAM revealed the Pool-Frenkel conduction. As a result of flexibility test, serious defects were generated in $HfO_x$ film deposited on PI (polyimide) substrate. On the other hand, the PMMA and PMMA-$HfO_x$ films showed an excellent flexibility without defect generation.

• Macromolecular Research
• /
• v.14 no.3
• /
• pp.373-382
• /
• 2006

A series of crosslinkable, waterborne polyurethanes (I-WBPUs) were prepared by in-situ polymerization using isophorone diisocyanate (IPDI)/poly(tetramethylene oxide) glycol (PTMG, $M_n$=2,000)/dimethylol propionic acid (DMPA)/ethylene diamine (EDA)/triethylamine (TEA)/aminoplast[hexakis(methoxymethyl)melamine (HMMM)] as a crosslinking agent. Typical crosslinkable, waterborne polyurethanes (B-WBPUs) blended from WBPU dispersion and aqueous HMMM solution was also prepared to compare with the I-WBPUs. The crosslinking reaction between WBPU and HMMM was verified using FTIR and XPS analysis. The effect of the HMMM contents on the dynamic mechanical thermal, thermal, mechanical, and adhesion properties of the I-WBPU and B-WBPU films were investigated. The storage modulus(E'), glass transition temperatures of the soft segment ($T_{gs}$) and the amorphous regions of higher order ($T_{gh}$), melting temperature ($T_m$), integral procedural decomposition temperature (IPDT), residual weight, $T_{10%}$ and $T_{50%}$ (the temperature where 10 and 50% weight loss occurred), tensile strength, initial modulus, hardness, and adhesive strength of both I-WBPU and B-WBPU systems increased with increasing HMMM content. However, these properties of the I-WBPU system were higher than those of the B-WBPU system at the same HMMM content. These results confirmed the in-situ polymerization used in this study to be a more effective method to improve the properties of the WBPU materials compared to the simple blending process.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2003.05a
• /
• pp.294-299
• /
• 2003

The efficiency of complex slurry preparation route for the development of high performance RS-SiCf/SiC composites has been investigated. The green bodies for RS-SiC and RS-SiCf/SiC composite materials prior to the infiltration of molten silicon were prepared with various C/SiC complex matrix slurries, which associated with both different sizes of starting SiC particles and blending ratios of starting SiC and carbon particles. The reinforcing materials in the composite system were uncoated and C coated Tyranno SA SiC fiber. The characterization of RS-SiC and RS-SiCf/SiC composite materials was examined by means of SEM, EDS and three point bending test. Based on the mechanical property-microstructure correlation, process optimization methodology is discussed.

• Textile Coloration and Finishing
• /
• v.29 no.2
• /
• pp.62-68
• /
• 2017

Coffee sludge and onion shells are known typically as waste resources as well as simultaneously being the raw material for dye having a golden brown color. This research studies the dyeability, functionality, and colors of woolen fabric after being dyed by different dyeing method using coffee sludge and onion shells extract. The woolen fabric was refined and pre-mordanted with tannin. The dyeing process conducted was single-dye, using coffee sludge and onion shells extract, sequential multi-dye, consecutively dyeing with coffee sludge and onion shells, and mixed-dye, blending coffee sludge extract and onion shells extract to dye. The dyeing was measured on the surface color, color fastness, and UV-protection ability. As a result, the expression of various hues of tan using coffee sludge and onion shells extract were shown to be possible. Additionally, single-dye, sequential multi-dye, mixed-dye had generally superiority in color fastness to light, all rating 3 and color fastness to washing, rating 3 or 4, showing relatively stable color fastness to washing. The UV protection ability was shown to be better, especially appearing satisfactory in the UV-B protection, all measured to be over 90%.

• Macromolecular Research
• /
• v.11 no.1
• /
• pp.62-68
• /
• 2003

Thermotropic liquid crystalline polymer (TLCP)/poly(ethylene 2,6-naphthalate) (PEN)/poly(ethylene terephthalate) (PET) ternary blends were prepared by melt blending, and were melt-spun to fibers at various spinning speeds in an effort to improve fiber performance and processability. Structure and property relationship of TLCP/PEN/PET ternary blend fibers and effects of annealing on those were investigated. The mechanical properties of ternary blend fibers could be significantly improved by annealing, which were attributed to the development of more ordered crystallites and the formation of more perfect crystalline structures. TLCP/PEN/PET ternary blend fibers that annealed at 18$0^{\circ}C$ for 2 h, exhibited the highest values of tensile strength and modulus. The double melting behaviors observed in the annealed ternary blend fibers depended on annealing temperature and time, which might be caused by different lamellae thickness distribution as a result of the melting-reorganization process during the DSC scans.