• 한국터널지하공간학회 논문집
• /
• 제10권1호
• /
• pp.59-68
• /
• 2008

골재 특성, 혼화재, 그리고 급결제 등이 콘크리트에 미치는 역학적 영향성을 평가하였다. 굵은골재 치수가 13 mm에서 8 mm로 작아질수록 유동 특성은 감소되었으나, 경화 콘크리트의 강도 및 동탄성계수는 크게 증가했다. 실리카흄 치환 적용 시 plain과 비교해 압축 강도 및 동탄성계수가 개선되었고, 고로슬래그 미분말을 적용한 경우 28일 재령에서 압축강도는 다소 증진되었다. 초기 수화 반응 및 압축 강도는 알루미네이트계 급결제를 적용한 시편이 다소 우수했고, 28일 강도 특성은 알칼리프리계 급결제 적용 시 크게 개선되었다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 춘계 학술논문 발표대회
• /
• pp.287-288
• /
• 2012

In this study, Analyzed the effect of the change in RFA and RCA substitution rate on the concrete containing BS bonding materials but no cement. The findings are as follows. First, the fresh concrete has less slump value and air contents as more RFA and RCA is used. In case of hardened concrete, as more RFA and RCA are used, the higher the compressive strength of concrete becomes. Especially, the compressive strength of concrete which used recycled aggregates only is found to be 2.2 times as high as that of concrete using natural fine and coarse aggregates only. But if the concrete is to be used as the structural concrete having the compressive strength of 13.8 MPa, the alkaline materials and some cement are required to be added.

• 대한토목학회논문집
• /
• 제12권1호
• /
• pp.107-113
• /
• 1992

제철산업(製鐵産業)의 부산물(副産物)로 발생하는 고로수쇄(高爐水碎)슬래그를 가공하지 않은 상태 그대로 콘크리트용 잔골재로 일부 대체하여 사용할 수 있는지 여부를 알아보기 위하여 실시한 기초연구의 일부이다. 본 연구 실험결과 국내에서 발생되는 고로수쇄(高爐水碎)슬래그를 가공공정 내지는 입도조정 등의 과정을 거치지 않은 상태로 모르터 및 콘크리트용 잔골재로 일부 대체하여 사용하기 위해서는 품질면에서 약간의 개선해야할 문제점이 있다고 생각되었다.

• 한국도로학회논문집
• /
• 제6권1호
• /
• pp.37-45
• /
• 2004

본 연구는 재생골재를 사용한 콘크리트의 강도 및 파괴특성을 고찰하므로써 콘크리트 포장체에 적용성 여부를 검토하기 위해 수행하였다. 재생콘크리트의 초기강도는 낮았으나 재령 증가에 따라 기준콘크리트와 거의 유사한 값을 나타내었으며. 탄성계수는 골재 강성 차이로 인하여 낮게 나타났다. 또한 고로슬래그 미분말을 혼합한 재생콘크리트의 강도개선효과를 확인할 수 있었다. TPFM에 의한 파괴에너지는 초기재령에서 재생콘크리트의 파괴특성이 우수한 것으로 나타났으나, 재령증가에 따라 기준콘크리트와 유사한 값으로 나타났다. 또한 P-CMOD 측정결과로부터 이론적으로 구한 탄성계수 및 인장강도와 실험으로 구한 탄성계수 및 쪼갬인장 강도사이의 상관성은 매우 높은 결과를 나타내어 시험방법의 신뢰성을 확인할 수 있었다.

• Advances in concrete construction
• /
• 제9권2호
• /
• pp.183-193
• /
• 2020

The present investigation is to identify an optimum mix combination amongst 28 different types of artificial lightweight aggregates by pelletization method with aggregate properties. Artificial aggregates with different combinations were manufactured from fly ash, cement, hydrated lime, ground granulated blast furnace slag (GGBFS), silica fume, metakaolin, sodium bentonite and calcium bentonite, at a standard 17 minutes pelletization time, with 28% of water content on a weight basis. Further, the artificial aggregates were air-dried for 24 hours, followed by hardening through the cold-bonding (water curing) process for 28 days and then testing with different physical and mechanical properties. The results found the lowest impact strength value of 16.5% with a cement-hydrated lime (FCH) mix combination. Moreover, the lowest water absorption of 16.5% and highest individual pellet crushing strength of 36.7 MPa for 12 mm aggregate with a hydrated lime-GGBFS (FHG) mix combination. The results, attained from different binder materials, could be helpful for manufacturing high strength artificial aggregates.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.322-325
• /
• 2003

Recently, as quality river aggregates like sands and gravels become scarce, use of crushed stones and sands, seashore sands, and seashore gravels is increasing abruptly. And, aggregates recycled from slags and waste concretes are used. However, since the converter slag easily expands and breaks due to free lime, differently from the blast-furnace slag, it is not suitable for use as concrete aggregates. Since the atomized steel slag aggregate has slippery surface and spherical shape, the mortar flowing characteristics improved as the atomized steel slag content increases, without regard to the aggregates coarseness and water/cement ratio. The flow characteristics loss rate of the mortar manufactured from steel slag aggregates was similar to that of the mortar manufactured from washed sand only. The compact strength of the mortar manufactured from coarse PS Ball were larger than that manufactured from washing sand only.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 춘계 학술논문 발표대회
• /
• pp.75-76
• /
• 2017

In the case of B / a 1: 3, the intensity when the substitution rate increased to 15% showed a tendency to decrease, but it turned out that the strength increased at the substitution rate of 20%. In the case of B / a 1: 4 and 1: 5, it was found that when the substitution rate at the substitution rate of 10% was the highest and the substitution rate increased further, the strength was reduced. However, since the test body does not exist at the age of 3 days and the age of 7 days at the substitution rate of 0%, there is no specimen, so blast furnace slag binder substitution for increasing strength of refractory mortar is judged to be meaningless.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 춘계 학술논문 발표대회
• /
• pp.242-243
• /
• 2014

In this study, industrial by-products including blast furnace slag, incineration ash and waste gypsum were used with recycled fine aggregates to manufacture the zero-cement mortar. The replacement ratio of anhydrite gypsum was fixed as 0, 10%, 20% the replacement ratio fo WA1 was fixed as 0.5% and 1.0%, respectively. It could be identified that when the replacement of gypsum was 20% and WA1 of 1.0%, the strength could be in the range of normal strength.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 춘계 학술논문 발표대회
• /
• pp.222-223
• /
• 2014

In this study, industrial by-products including blast furnace slag, incineration ash and waste gypsum were used with recycled fine aggregates to manufacture the zero-cement mortar.The replacement ratio of dihydrate gypsum and anhydrite gypsum was fixed as 0 and 10%, the replacement ratio fo WA1 was fixed as 0.5% and 1.0%, respectively. It could be identified that when the replacement of gypsum was 10% and WA1 of 1.0%, the strength could be in the range of normal strength.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 추계 학술논문 발표대회
• /
• pp.154-155
• /
• 2014

The object of this research is showing the effect of additional hydration of BS with OPC and less amount of gypsum in WA for the binder of BS with RFA mortar on strength development. The test performed was using factors of 0, 10, 30, and 50 % of OPC replacement for effect on strength development with additional stimulation.