• 제목/요약/키워드: Blade loads

검색결과 172건 처리시간 0.025초

소형민수헬기 주로터 풍동시험을 위한 마하 스케일 블레이드 설계 (Design of Mach-Scale Blade for LCH Main Rotor Wind Tunnel Test)

  • 기영중;박중용
    • 한국항공우주학회지
    • /
    • 제46권2호
    • /
    • pp.159-166
    • /
    • 2018
  • 본 연구에서는 소형민수헬기(Light Civil Helicopter, LCH)의 풍동시험에 필요한 축소 로터 블레이드에 대해 내부 구조설계와 동특성 및 하중해석을 수행하였다. 축소로터 풍동시험은 로터 시스템의 공력성능과 소음 특성을 평가하기 위해 수행되므로, 실제 크기의 로터시스템과 동일한 공력 특성을 모사할 수 있도록 축소 블레이드 설계 시 마하 스케일(Mach-scale) 기법을 적용하였다. 마하 스케일 블레이드는 실물 블레이드의 끝단속도(blade tip speed)와 동일한 값을 유지할 수 있도록 로터의 회전속도를 증가시켜야 하며, 블레이드 중량, 단면강성 및 고유진동수 등은 특정한 축소계수(${\lambda}$, scaling factor)를 통해 조정된다. 블레이드 내부의 주요 구성품인 스킨, 스파, 토션박스 등을 설계하기 위해 탄소섬유와 유리섬유 계열의 복합소재를 적용하였으며, 국내에서 수급이 가능한 프리프레그(prepreg) 형태의 복합소재를 적용하였다. 내부구조 설계가 완료된 블레이드에 대해 단면강성을 평가하기 위해 KSec2D 프로그램을 사용하였으며, 회전익 항공기의 통합해석 프로그램인 CAMRADII를 이용하여 축소 블레이드의 하중 분포와 동역학적 특성을 검토하였다.

FAST, GH Bladed 및 CFD기법을 이용한 5MW 해상풍력터빈 시스템 설계하중조건 해석 및 비교 (Design Load Case Analysis and Comparison for a 5MW Offwhore Wind Turbine Using FAST, GH Bladed and CFD Method)

  • 김기하;김동현;곽영섭;김수현
    • 한국유체기계학회 논문집
    • /
    • 제18권2호
    • /
    • pp.14-21
    • /
    • 2015
  • Design lifetime of a wind turbine is required to be at least 20 years. The most important step to ensure the deign is to evaluate the loads on the wind turbine as accurately as possible. In this study, extreme design load of a offshore wind turbine using Garrad Hassan (GH) Bladed and National Renewable Energy Laboratory (NREL) FAST codes are calculated considering structural dynamic loads. These wind turbine aeroelastic analysis codes are high efficiency for the rapid numerical analysis scheme. But, these codes are mainly based on the mathematical and semi-empirical theories such as unsteady blade element momentum (UBEM) theory, generalized dynamic wake (GDW), dynamic inflow model, dynamic stall model, and tower influence model. Thus, advanced CFD-dynamic coupling method is also applied to conduct cross verification with FAST and GH Bladed codes. If the unsteady characteristics of wind condition are strong, such as extreme design wind condition, it is possible to occur the error in analysis results. The NREL 5 MW offshore wind turbine model as a benchmark case is practically considered for the comparison of calculated designed loads. Computational analyses for typical design load conditions such as normal turbulence model (NTM), normal wind profile (NWP), extreme operation gust (EOG), and extreme direction change (EDC) have been conducted and those results are quantitatively compared with each other. It is importantly shown that there are somewhat differences as maximum amount of 18% among numerical tools depending on the design load cases.

Reliability-based combined high and low cycle fatigue analysis of turbine blade using adaptive least squares support vector machines

  • Ma, Juan;Yue, Peng;Du, Wenyi;Dai, Changping;Wriggers, Peter
    • Structural Engineering and Mechanics
    • /
    • 제83권3호
    • /
    • pp.293-304
    • /
    • 2022
  • In this work, a novel reliability approach for combined high and low cycle fatigue (CCF) estimation is developed by combining active learning strategy with least squares support vector machines (LS-SVM) (named as ALS-SVM) surrogate model to address the multi-resources uncertainties, including working loads, material properties and model itself. Initially, a new active learner function combining LS-SVM approach with Monte Carlo simulation (MCS) is presented to improve computational efficiency with fewer calls to the performance function. To consider the uncertainty of surrogate model at candidate sample points, the learning function employs k-fold cross validation method and introduces the predicted variance to sequentially select sampling. Following that, low cycle fatigue (LCF) loads and high cycle fatigue (HCF) loads are firstly estimated based on the training samples extracted from finite element (FE) simulations, and their simulated responses together with the sample points of model parameters in Coffin-Manson formula are selected as the MC samples to establish ALS-SVM model. In this analysis, the MC samples are substituted to predict the CCF reliability of turbine blades by using the built ALS-SVM model. Through the comparison of the two approaches, it is indicated that the reliability model by linear cumulative damage rule provides a non-conservative result compared with that by the proposed one. In addition, the results demonstrate that ALS-SVM is an effective analysis method holding high computational efficiency with small training samples to gain accurate fatigue reliability.

풍동 시험용 틸트로터의 구조 하중 해석의 검증 연구 (A Validation Study on Structural Load Analyses of TiltRotors in Wind Tunnel)

  • 황의진;박재상;이명규
    • 항공우주시스템공학회지
    • /
    • 제17권2호
    • /
    • pp.45-55
    • /
    • 2023
  • 본 연구에서는 V-22 Osprey 틸트로터의 25% 축소 모델인 TRAM에 대하여 회전익기 통합 해석 코드인 CAMRAD II를 이용하여 프롭로터의 Aeromechanics 모델링과 블레이드 및 피치 링크에 대한 구조 하중 해석을 수행한 후, DNW 풍동 시험 및 선행 해석 연구 결과와 상호 비교하였다. 본 연구에서는 저속 전진 비행 시 블레이드 플랩 굽힘 모멘트의 구조 하중 및 진동 하중 변화를 풍동 시험 결과에 대하여 비교적 잘 예측하였다. 리드-래그 굽힘 및 비틀림 모멘트의 구조 하중 및 진동 하중 해석은 풍동 시험과 다소 다르게 얻어졌으나, 평균값을 제거하였을 때 로터 회전 한 바퀴당 구조 하중 해석 결과가 풍동 시험 및 선행 해석 연구와 비교적 유사하였다. 피치 링크의 구조 하중 및 진동 하중 해석은 전반적으로 선행 연구의 시험 및 해석 결과와 유사하게 얻어졌다. 마지막으로 블레이드 구조 진동 하중의 조화 성분 해석 및 비교를 통하여 블레이드 리드-래그 굽힘 및 비틀림 모멘트의 오차 발생 원인을 분석하였다.

KUH 주로터 축소 블레이드 설계 (Design of KUH Main Rotor Small-scaled Blade)

  • 김도형;김승호;한정호
    • 항공우주기술
    • /
    • 제8권1호
    • /
    • pp.32-41
    • /
    • 2009
  • 본 연구에서는 한국형기동헬기(KUH) 주로터 블레이드의 축소 설계를 수행하였다. 축소 모델은 공력하중, 익단 와류 및 소음원 측정 시험을 위해 설계되었다. 실제 로터와 동일한 공력 하중을 모사하기 위하여 마하스케일링 기법이 적용되었다. 마하스케일 모델은 블레이드의 익단 마하수가 동일하며, 정규화된 진동수 또한 동일하다. 즉, 마하스케일된 모델은 공력하중 및 구조동역학적 과점에서 상사된 모델이다. 공기역학적 축소과정은 외형 치수의 축소와 회전수의 증가를 통해 완료된다. 구조동역학적 측면에서는 블레이드 단면 설계를 통해 생성된 강성 및 관성 분포가 실제 로터의 회전고유진동수 분포를 나타내는지 확인하는 과정을 통해 완료된다. 본 연구에서는 국내에서 수급 가능한 복합재 프리프레그를 이용한 블레이드 단면 설계를 수행하고, 설계된 모델의 동역학적 특성을 고찰하였다.

  • PDF

Impact of spar-nacelle-blade coupling on the edgewise response of floating offshore wind turbines

  • Dinh, Van-Nguyen;Basu, Biswajit;Nielsen, Soren R.K.
    • Coupled systems mechanics
    • /
    • 제2권3호
    • /
    • pp.231-253
    • /
    • 2013
  • The impact of spar-nacelle-blade coupling on edgewise dynamic responses of spar-type floating wind turbines (S-FOWT) is investigated in this paper. Currently, this coupling is not considered explicitly by researchers. First of all, a coupled model of edgewise vibration of the S-FOWT considering the aerodynamic properties of the blade, variable mass and stiffness per unit length, gravity, the interactions among the blades, nacelle, spar and mooring system, the hydrodynamic effects, the restoring moment and the buoyancy force is proposed. The aerodynamic loads are combined of a steady wind (including the wind shear) and turbulence. Each blade is modeled as a cantilever beam vibrating in its fundamental mode. The mooring cables are modeled using an extended quasi-static method. The hydrodynamic effects calculated by using Morison's equation and strip theory consist of added mass, fluid inertia and viscous drag forces. The random sea state is simulated by superimposing a number of linear regular waves. The model shows that the vibration of the blades, nacelle, tower, and spar are coupled in all degrees of freedom and in all inertial, dissipative and elastic components. An uncoupled model of the S-FOWT is then formulated in which the blades and the nacelle are not coupled with the spar vibration. A 5MW S-FOWT is analyzed by using the two proposed models. In the no-wave sea, the coupling is found to contribute to spar responses only. When the wave loading is considered, the coupling is significant for the responses of both the nacelle and the spar.

NREL 5MW 풍력터빈의 블레이드 하중 저감을 위한 개별피치제어 (Individual Pitch Control of NREL 5MW Wind Turbine Blade for Load Reduction)

  • 라요한;남윤수;손재훈
    • 대한기계학회논문집A
    • /
    • 제36권11호
    • /
    • pp.1427-1432
    • /
    • 2012
  • 풍력터빈이 점차 대형화 되면서 로터 직경도 점차 커지고 있다. 로터 블레이드는 윈드시어와 타워교란 효과로부터 기계적 하중을 받게 된다. 이러한 기계적 하중은 풍력터빈의 수명을 단축시킨다. 따라서, 풍력터빈의 크기가 커짐에 따라 기계적 하중 완화를 위한 풍력터빈 제어 시스템 설계가 중요하다. 본 논문에서는 로터 블레이드의 기계적 하중 저감을 위한 개별 피치 제어에 대해 소개하고 IPC 성능 검증을 위해 시뮬레이션을 통하여 논의한다.

Fault Tolerant Control of Wind Turbine with Sensor and Actuator Faults

  • Kim, Jiyeon;Yang, Inseok;Lee, Dongik
    • 센서학회지
    • /
    • 제22권1호
    • /
    • pp.28-37
    • /
    • 2013
  • This paper presents a fault-tolerant control technique for wind turbine systems with sensor and actuator faults. The control objective is to maximize power production and minimize turbine loads by calculating a desired pitch angle within their limits. Any fault with a sensor and actuator can cause significant error in the pitch position of the corresponding blade. This problem may result in insufficient torque such that the power reference cannot be achieved. In this paper, a fault-tolerant control technique using a robust dynamic inversion observer and control allocation is employed to achieve successful pitch control despite these faults in the sensor and actuator. The observer based detection method is used to detect and isolate sensor faults by checking whether errors are larger than threshold values. In addition, the control allocation technique is adopted to tolerate actuator fault. Control allocation is one of the most commonly used fault-tolerant control techniques, especially for over-actuated systems. Further, the control allocation method can be used to achieve the power reference even in the event of blade actuator fault by redistributing the lost torque due to erroneous pitch position into non-faulty blade actuators. The effectiveness of the proposed method is demonstrated through simulations with a benchmark model of the wind turbine.

고성능 형상 및 유리섬유/에폭시-우레탄 샌드위치 구조를 사용한 소형 풍력발전 블레이드의 공력 및 구조설계 (Aerodynamic and Structural Design on Small Wind Turbine Blade Using High Performance Configuration and E-Glass/Epoxy-Urethane Foam Sandwich Composite Structure)

  • Chang-Duk Kong;Jo-Hyug Bang
    • 한국추진공학회지
    • /
    • 제8권1호
    • /
    • pp.70-80
    • /
    • 2004
  • 본 연구에서는 한국과 같이 비교적 저 풍속인 지역에 적용 가능하도록 피치제어장치를 가진 1kW급 소형 풍력발전 시스템의 개발 결과를 제시하였다. 공력설계에서는 블레이드의 직경이 동급의 상용 블레이드 보다 과도하게 크지 않으면서도 저 풍속 지역에서 보다 효율적인 형상설계를 위해 여러 가지 설계 변수분석을 통한 파라미터 연구가 수행되었다. 또한 구조설계를 통해 풍력발전기에 작용하는 다양한 하중을 효과적으로 견딜 수 있는 경량의 복합재 구조가 설계되었다. 구조설계의 평가를 위해 유한요소 구조해석이 수행되었으며, 실물 구조시험을 수행하여 구조적 안전성을 확인하였다.

헬리콥터 Blade의 모드해석에 적용된 응력패턴해석 계측기법의 타당성 (Validation of the Strain Pattern Analysis (SPA) Measuring Technique)

  • Pakshir, Nabi
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 1996년도 춘계학술대회논문집; 부산수산대학교, 10 May 1996
    • /
    • pp.361-369
    • /
    • 1996
  • The accurate prediction of modal parameters of a rotating blade is an important requirement in the assessment of the dynamics of a helicopter rotor. Indeed, predictions of flight loads and stability are normally dependent on initially predicting the undamped mode shapes. A measuring technique, known as Strain Pattern Analysis (SPA), appears to be the most successful technique for measuring the mode shapes of rotating blades. This method was developed to be used on actual aircraft so no attempt was made to measure rotating mode shapes directly in order to validate the SPA method. This report summarizes results from experimental investigations which were carried out to validate the SPA method for the prediction of aerodynamically damped modes of a rotating blade. A series of modal tests were carried out on two rotor models in which the non-rotating, undamped and aerodynamically damped rotating modes were measured directly (strain and displacement patterns). It is shown that the SPA method to be very successful in itself but there are a number of limitations in validating this technique. To provide data which could be used to confidently validate theoretical prediction codes, existing limitations should be addressed.

  • PDF