• Journal of the Korean Ceramic Society
• /
• v.33 no.5
• /
• pp.479-484
• /
• 1996

The tribological properties of ceramics are very important in the application to engineering ceramic parts such as mechanical seal slurry valve disc and so on. In this study the effect of graphite addition on the mechanical and tribological properties of RBSC/graphite composites were investigated. The composites were prepared by adding graphite powder to the mixture of SiC powder metallic siliconcarbon black and alumina. Bending strength water absorption friction coefficient the amount of worn out material at a certain time and maximum surface roughness(Rmax) of the prepared composites were measured and crystalline phases were examined with XRD. The composite containing 5 vol% graphite powder showed improved bending strength due to high green density and decreased friction coefficient and wear resistance. The friction coefficient and the wear resistance of the composite were increased by adding graphite powder up to 10 vol% They decreased however as increasing the amount of graphite powder more that 10vol% There was no linear relationship between the tribological properties and bending strength of the composites.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.63 no.1
• /
• pp.1-6
• /
• 2014

An electric power system sometimes fails because of disturbances that occur unexpectedly, such as the uncontrolled loss of load that developed from cascading blackout. Which make stability through a little of under voltage load shedding should work. The development of phasor measurement unit(PMU) makes network supervision possible. The information obtained from PMU is synchronized by global positioning system(GPS). There are many real-time algorithms which are monitoring the voltage stability. This paper presents the study on the VILS(Voltage Instability Load Shedding) using PMU data. This algorithm computes Voltage Stability Margin Index(VSMI) continuously to track the voltage stability margin at local bus level. The VSMI is expressed as active and reactive power. The VSMI is used as an criterion for load shedding. In order to examine the algorithm is effective, applied to KEPCO system.

• Journal of Biosystems Engineering
• /
• v.30 no.5 s.112
• /
• pp.299-305
• /
• 2005

This study was developed image processing algorithm for recognition of few teats of a cow in the image using black and white camera attached with infrared filter. Spectroscopic analysis was used for selection of a NIR filter to separate teats from udder skin in the image captured. To verify the performance of image processing algorithm was developed and NIR filter was selected, carried out an experiment with cows. NIR band-pass filter was used to pass the 975nm band of light spectrum. The image processing algorithm was developed could recognize all teats and the process time was 0.9 second to recognize the all teats and to acquire end position of teats.

• Journal of the Korean Chemical Society
• /
• v.4 no.1
• /
• pp.70-77
• /
• 1957

4,5-Diphenyl Imidazolone is synthesized from Benzoin, Urea, and Acetic acid catalyser. Nowadays, it is being used as an optical bleaching agent for wool and nylon textiles. Up to now, only one process of synthesis has been known. In order to find out the best conditions governing the yield were examined under various catalysers and conditions. In this experiment, the summary of results were as follows. a. On Acetic acid catalyser. The maximum yield conditions were mol ratio (Benzoin: Urea: Acetic acid) 1 : 2 : 14, Acetic acid concentration 99.9%. Reaction temperature 115$^{\circ}$. Under reaction time of 2 hours, above yield was 96.4%. b. On Mineral acid Catalyser. In using of Sulfonic acid, the color of solution was changed dark purlish black. With other mineral acid catalysers, in spite of increasing of temperature, it was proved that Benzoin floats on the solution, so that this reaction could not be continue. c. On Phosphoric acid catalyser. It was made clear that it can not be used for this reaction. d. On Sodium hydroxide catalyser. As one of Alkali catalyser, Sodium hydroxide was examined but this was unsuitable substance for this reaction. e. On Formic acid catalysers. The maximum yield conditions were mol ratio (Benzoin: Urea: Formic acid) 1: 2: 30. Formic acid concentration 85.%. Reaction temperature 150∼110$^{\circ}$. Under reaction time of 90 minutes, the best yield was 87%. Hereby, it was proved that organic acids such as Acetic acid and Formic acid can be used. When using Acetic acid, the yield was better than Formic acid, but it takes longer reaction time than Formic acid. About the fluorescent effect, the temperature of dye-bath must not be over 904,5-Diphenyl Imidazolone is synthesized from Benzoin, Urea, and Acetic acid catalyser. Nowadays, it is being used as an optical bleaching agent for wool and nylon textiles. Up to now, only one process of synthesis has been known. In order to find out the best conditions governing the yield were examined under various catalysers and conditions. In this experiment, the summary of results were as follows. a. On Acetic acid catalyser. The maximum yield conditions were mol ratio (Benzoin: Urea: Acetic acid) 1 : 2 : 14, Acetic acid concentration 99.9%. Reaction temperature 115$^{\circ}$. Under reaction time of 2 hours, above yield was 96.4%. b. On Mineral acid Catalyser. In using of Sulfonic acid, the color of solution was changed dark purlish black. With other mineral acid catalysers, in spite of increasing of temperature, it was proved that Benzoin floats on the solution, so that this reaction could not be continue. c. On Phosphoric acid catalyser. It was made clear that it can not be used for this reaction. d. On Sodium hydroxide catalyser. As one of Alkali catalyser, Sodium hydroxide was examined but this was unsuitable substance for this reaction. e. On Formic acid catalysers. The maximum yield conditions were mol ratio (Benzoin: Urea: Formic acid) 1: 2: 30. Formic acid concentration 85.%. Reaction temperature 150∼110$^{\circ}$. Under reaction time of 90 minutes, the best yield was 87%. Hereby, it was proved that organic acids such as Acetic acid and Formic acid can be used. When using Acetic acid, the yield was better than Formic acid, but it takes longer reaction time than Formic acid. About the fluorescent effect, the temperature of dye-bath must not be over 90$^{\circ}$. and the ratio of 4,5-Diphenyl Imidazolone and water should be from 1:50000. to 1:10000. It proved that the best effect on textiles, and the best condition were dye-temperature near 704,5-Diphenyl Imidazolone is synthesized from Benzoin, Urea, and Acetic acid catalyser. Nowadays, it is being used as an optical bleaching agent for wool and nylon textiles. Up to now, only one process of synthesis has been known. In order to find out the best conditions governing the yield were examined under various catalysers and conditions. In this experiment, the summary of results were as follows. a. On Acetic acid catalyser. The maximum yield conditions were mol ratio (Benzoin: Urea: Acetic acid) 1 : 2 : 14, Acetic acid concentration 99.9%. Reaction temperature 115$^{\circ}C$. . Under reaction time of 2 hours, above yield was 96.4%. b. On Mineral acid Catalyser. In using of Sulfonic acid, the color of solution was changed dark purlish black. With other mineral acid catalysers, in spite of increasing of temperature, it was proved that Benzoin floats on the solution, so that this reaction could not be continue. c. On Phosphoric acid catalyser. It was made clear that it can not be used for this reaction. d. On Sodium hydroxide catalyser. As one of Alkali catalyser, Sodium hydroxide was examined but this was unsuitable substance for this reaction. e. On Formic acid catalysers. The maximum yield conditions were mol ratio (Benzoin: Urea: Formic acid) 1: 2: 30. Formic acid concentration 85%. Reaction temperature 150∼110$^{\circ}C$. Under reaction time of 90 minutes, the best yield was 87%. Hereby, it was proved that organic acids such as Acetic acid and Formic acid can be used. When using Acetic acid, the yield was better than Formic acid, but it takes longer reaction time than Formic acid. About the fluorescent effect, the temperature of dye-bath must not be over 90$^{\circ}C$. and the ratio of 4,5-Diphenyl Imidazolone and water should be from 1:50000. to 1:10000. It proved that the best effect on textiles, and the best condition were dye-temperature near 70$^{\circ}C$. and dye-time 15 minutes. . and dye-time 15 minutes. . and the ratio of 4,5-Diphenyl Imidazolone and water should be from 1:50000. to 1:10000. It proved that the best effect on textiles, and the best condition were dye-temperature near 70$^{\circ}C$. and dye-time 15 minutes.

• Journal of Environmental Science International
• /
• v.22 no.6
• /
• pp.723-732
• /
• 2013

This study was carried out to investigate changes of protease and amylase activities and nitrogen content in Chungkookjang prepared by Bacillus subtilis S8 and different soybean. Amino-type nitrogen and ammonia-type nitrogen contents increased with an increase in fermentation time and was the highest in black soybean Chungkookjang. The number of viable cells increased up to 24 h of fermentation at all temperatures tested; especially, their levels were the highest at $40^{\circ}C$. Protease activity was the highest in black soybean Chungkookjang. ${\alpha}$-amylase activity increased significantly up to 6 h of fermentation at $30^{\circ}C$ and $40^{\circ}C$ and then maintained constantly. It also increased up to 30-36 h of fermentation at $45^{\circ}C$ and then decreased. ${\beta}$-amylase activity was the highest in black soybean Chungkookjang at $35^{\circ}C$ and $40^{\circ}C$ and in yellow soybean Chungkookjang at $45^{\circ}C$. Production pattern of reducing sugar was similar to that of ${\beta}$-amylase. Amino-type nitrogen, viable cell number and reducing sugar content and ${\beta}$-amylase activity was the highest in Chungkookjang fermented at $40^{\circ}C$. Considering amino-type and ammonia-type nitrogen contents, Chungkookjang fermentation using yellow soybean was favorable. However, the fermentation using black soybean was favorable, considering protease and amylase activities and reducing sugar content.

• Korean journal of applied entomology
• /
• v.3
• /
• pp.1-5
• /
• 1964

Symptom of the mosaic disease of black locust which is presently widespread in Korea was observed and transmission of the disease was investigated by means of grafting Since its symptom was typically mosaic and its transmission was easily accomplished, the disease was considered to be caused by a virus. In investigation of transmission by grafting, it was found out that the discase was easily transmitted in both of the following cases, i. e., healthy seedlings grafted with diseased scions and diseased roots with healthy scions. In the healthy seedlings plus diseased scions grafting, some grafted seedlings were purposedly deprived of the diseased scions after, a certain length of time(10∼30 days), while some were left grafted. The former case showed much higher transmission rate than the latter case, but no fluctuation in rate of transmission by the length of contact period(10-30 days) was recognized. And even when the union between stock and diseased scion by callusing was not successful, the transmission was withnesed. On the basis of the symptom, transmission by grafting, and possibility of transmission by sap inoculation(not published yet), it is supposed that the mosaic virus belongs to the group of the black locust mosaic virus that has been reported in southeastern Europe by Atanasoff(1935) and Milinko et al(1961). It is very likely that the witches' broom of black locust recorded by Myung-O Kim et al(1961) in Korea is the mosaic disease.

• Journal of Veterinary Clinics
• /
• v.32 no.4
• /
• pp.363-365
• /
• 2015

The Asiatic black bear (Ursus thibetanus) is globally protected species and involved in a species restoration program by the Korea National Park Service. However, the bears could not be released into the wild were required regulation of population due to the limited space of breeding facility, so surgical castration was performed in two males. Bears were immobilized with a combination of 2 mg/kg tiletamine-zolazepam and $40{\mu}g/kg$ medetomidine, and general anesthesia was maintained with isoflurane via endotracheal tube intubation. Orchiectomy was carried out by the closed method using the LigaSure vessel sealing device through pre-scrotal incision. Subcutaneous tissues of the incision site were sutured by continuous pattern with absorbable suture material, and the skin incision was closed with tissue glue. The bears recovered uneventfully from general anesthesia after a duration of 58 min (bear A) and 53 min (bear B). Total surgical time was 26 min (bear A) and 24 min (bear B). No postoperative swelling or complications were observed. This is the first report that describes the use of the LigaSure for orchiectomy in the Asiatic black bear.

• The Bulletin of The Korean Astronomical Society
• /
• v.38 no.2
• /
• pp.44.1-44.1
• /
• 2013

We investigate the origin of radio emission in nearby early-type galaxies using the European VLBI Network (EVN) at 1.4 GHz. The sample included NGC 1277, which was found to have an over-massive black hole of $1.7{\times}10^{10}M_{\odot}$, and four other early-type galaxies in the Perseus cluster. All the sources were detected above $5{\sigma}$. They show compact radio cores and high brightness temperatures, $10^7{\sim}10^9K$, which implies that radio emission in these objects is non-thermal. While the observed radio luminosities could be consistent with star formation (${\sim}1M_{\odot}yr^{-1}$), the small source size would imply a specific star formation rate (sSFR) of ${\sim}10^6M_{\odot}yr^{-1}kpc^{-2}$. Such a high sSFR rules out ongoing star formation. Supernovae (SNe) are ruled out as well because it is unlikely that we see SNe in all galaxies at the same time, and there is no significant radio variability either. The most plausible scenario is that these galaxies show low luminosity AGN activity in the radio, although there is no sign of AGN activity in other bands. If our interpretation is correct, then regular early-type galaxies may harbor active AGN more often than suspected from observations at other wavelengths.

• Journal of Energy Engineering
• /
• v.26 no.3
• /
• pp.71-77
• /
• 2017

In the event of loss of coolant accident (LOCA) and station black out (SBO) in the primary system of a nuclear reactor, the coolant water should be injected to reactor coolant system (RCS) without any intervention of operators or active components. To satisfy the requirements, hybrid safety injection tank (Hybrid SIT) was suggested by Korea Atomic Energy Research Institute (KAERI). The pressure equalizing time of Hybrid SIT is an important parameter to determine the timing of coolant injection. To predict the pressure equalizing time of the Hybrid SIT, a separate effect test facility was constructed and sensitivity tests were conducted in various conditions. The main parameter determining the pressure equalizing time was obtained from separate effect test (SET) results. The wall of condensation on the inner wall of SIT and direct contact condensation on the water surface affected to the pressure equalizing time very much. In this study, the effect of each condensation phenomena on pressure equalizing time was quantitatively analyzed from results of SET and a prediction method of pressure equalizing time was proposed.

• Journal of Life Science
• /
• v.19 no.3
• /
• pp.384-389
• /
• 2009

This study was carried out to elucidate the relation between expression levels of three melanin synthesis genes (Tyrosinase, Tyrosinase-related protein 1 and Dopachrome tautomerase) according to the Melanocortin-1 receptor genotypes with coat color patterns in Hanwoo cattle, Jeju black cattle and Holsteins. Using real-time semiquantitative reverse transcription-PCR assay (RT-PCR), the expression levels of these three genes were analyzed in skin tissues from four representative coat colored areas: yellowish-brown from MC1R e/e Hanwoo, wild type black from $E^+/E^+$ Jeju black cattle (JBC), and dominant black and white pied regions from $E^D/E^D$ Holstein. The TYR, TYRP1 and DCT genes showed higher expression levels of 4.5, 2.3 and 2.5 times higher in the black skin area of Holsteins than those of from JBC, respectively (p<0.001). In addition, the expression levels of these three genes from JBC were significantly higher than those from Hanwoo cattle (p<0.001). These results show that coat color phenotypes in Hanwoo cattle, JBC and Holsteins is directly correlated with TRY, TYRP1 and DCT transcription levels, which probably reflected involvement with MC1R genotypes; e/e in Hanwoo, $E^+/E^+$ in JBC and $E^D/E^D$ in Holsteins. Consequently, this study suggested that the status of MC1R protein may not only induce the transcription activities of a series of TYR and its related genes responsible for melanin synthesis, but also determine the levels of total melanin contents in bovine skin.