• Applied Chemistry for Engineering
• /
• v.20 no.6
• /
• pp.622-627
• /
• 2009

Using an alkali-solution developable photosensitive resin and a carbon black as a conductive filler, photo-patternable pastes for polymer thick film resistor were fabricated and evaluated. A photo solder resist (PSR), which is usually used as protecting layer of printed circuit board (PCB), was used as a photosensitive resin so that ultraviolet exposure and alkali-aqueous solution development of paste were possible. After fabricating the photosensitive polymer resistor paste, the electrical properties of thick film resistors were measured using PCB test boards. Sheet resistance was decreased with increasing amount of carbon black, but the developability was limited in excess loading of carbon black. The sheet resistance was also reduced by re-curing and the change rate was smaller in higher carbon black loading. Moreover, finely patterned meander-type thick film resistors were fabricated using photo-process and large resistance up to several tens of sheet resistance could be obtained in small area by this technique.

• Journal of Bio-Environment Control
• /
• v.15 no.2
• /
• pp.184-189
• /
• 2006

Effects of interspace mulching between polyethylene film house on growth and quality of oriental melon were followed. Soil moisture in control was 26.0%. Those of black nonwoven fabrics sheet and black film were less 1.2% and 2.9% than control, respectively. Soil temperature in control plot was $2.4^{\circ}$ Those of black nonwoven fabrics sheet and black film were higher $0.8^{\circ}$ and $1.8^{\circ}$ than control, respectively. Black film was better than control in stem length, leaf number and area, chlorophyll content, xylem exudate, first flowering and fruit riping periods. Black film was better in fruit weight and soluble solid, and lesser in fermented and malformed fruit ratios, and increased 28% in marketable fruit ratio to control, 1,864kg. This results were mainly from vinyl coverage between polyethylene film house to intercept rainfall and to increase soil temperature, which fasted growth of roots after transplanting in winter season.

• International Journal of Contents
• /
• v.9 no.1
• /
• pp.90-97
• /
• 2013

The L.A. riots, which happened during three days from April 29 to May 1, 1992, are viewed as the most deadly and destructive riots in American history. Depicted in blaring front-page headlines and violent pictures on television, this urban upheaval received epic exposure in many countries. In Korea, it was especially shocking due to the viewpoint that highlighted the conflict between Korean and African Americans. This paper aims to review the black-Korean conflict during the 1992 L.A. riots in a Korean movie, Western Avenue. It is a film that narrates the despair of Korean Americans in the context of the L.A. riots, while placing American ideologies on trial. It is the only feature-length film to portray the story of Korean Americans in the L.A. riots. This paper examines some of the factors that resulted from the 1992 L.A. riots before the discussion of Western Avenue. Then, the paper analyzes the story of the Korean American in the film, focusing on how this film deals with the black-Korean conflict during the 1992 L.A. riots.

• English & American cultural studies
• /
• v.14 no.1
• /
• pp.1-26
• /
• 2014

Multicultural theories fully fledged around the 1980s and the early 1990s. Emerging in the 1960s thanks to the Civil Rights movement, multiculturalism has become the grand American national narratives, whose tenets recognize and respect people with diverse racial and cultural backgrounds. This period, however, witnessed the eruption of violent and destructive rebellions or uprisings involving racial minorities. Racial conflicts and tensions exploded at the moment when multiculturalism was widely practiced in areas including education and public policy revealing that complicated problems are embedded in the urban ghettos. American popular culture, specifically addresses antagonisms among different races or ethnicities in Bed-Stuy in New York. Although the film is mainly concerned with the collision among races, it lets ambivalent and cacophonous values and ideologies be present in the black community. On the other hand, Ice Cube's "Black Korea" empowers the black community when it deals with the turbulent relationship between black residents and Korean American merchants. Simultaneously, it denigrates Korean Americans as gasta raps often target the institution like government or police. In short, while attempts to search the ideas of coexistence and juxtaposition through polyphonic features embodied in the film "Black Korea" seems to depend on the dualistic system when it deals with the black-Korean conflicts and as a result it just reveals the chasm between two communities.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.212-213
• /
• 2006

Polymer thick film resistor paste was fabricated using various materials. Inorganic materials of carbon black and graphite were selected as fillers and epoxy resin was selected as organic material. Solvent with high boiling temperature was applied to adjust viscosity. A designed test coupon pattern was used to evaluate fabricated resistors. Aspect ratio of 1 was selected for evaluating resistor values. Electrical properties of fabricated resistors were measured and their values analyzed in relation to paste composition. PTF fabricated using carbon black as fillers achieved resistor value of $530{\Omega}/sq$.

• Korean Journal of Food Science and Technology
• /
• v.31 no.1
• /
• pp.158-163
• /
• 1999

The quality change of black rice during storage at $20^{\circ}C$ was measured to determine a packaging material for black rice storage, using polyethylene film (PE), polypropylene film (PP) and laminated film with PE and PP (PE/PP). Water activity of black rice was 0.642 at initial time and changed little in 8 months during storage at $20^{\circ}C$. Acidity of black rice was 25 mg KOH at initial time and was the lowest, 33.16 mg KOH, within PE/PP of 0.10 mm in thickness in 8 months during storage at $20^{\circ}C$. L, a and b values, hunter color value of black rice were not changed significantly in all packaging materials during 8 month storage. Hardness of the black rice was increased a little, but changed the smallest in PF/PP and the largest in PE with 0.05mm in thickness in 8 months. During storage, hexanal content was increased the smallest in PE/PP and the largest in 0.05 mm PE. Among fatty acid of black rice, linoleic acid was changed the smallest in PE/PP and the largest in 0.05 mm PE. In conclusion, PE/PP was better for the storage of black rice than PE and PP.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.2
• /
• pp.293-298
• /
• 2001

EB-NMP free standing film is manufactured from NMP solution of polyaniline(emeraldine base EB). Also ES(emeraldine salt EB . HCl) film is manufactured by doping of EB-NMP film with 1 mole HCI aqueous solution. And EB-mixture films containing conductor(carbon black, graphite, Ag etc.) are prepared, In this study, electromagnetic interference shielding efficiency(EMI SE) of ES free standing film ($\sigma$=5 S/cm, t=0.14mm) is 23~25 dB in the frequency range of 10 MHz~1 GHz. ES-mixture(carbon black, graphite, Ag etc.) films, polyaniline film doped camphorsulfonic acid(CSA) show higher EMI SE(30~34 dB, 36~42 dB, 44~52 dB, 34~43 dB) property than that of ES free standing film, respectively.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.32 no.3
• /
• pp.252-255
• /
• 2019

Black phosphorus (BP) is a potential candidate for an anode in lithium ion batteries due to its high theoretical capacity and the large interlayer spacing in the monolayered phosphorene form, allowing for lithium intercalation/deintercalation. In this study, large-scale exfoliation of bulk BP was accomplished using a solution of NaOH and N-methyl-2-pyrrolidone (NMP), yielding phosphorene, which can be assembled into nanoflakes using electrophoretic deposition (EPD). Through the systematic addition of NaOH and subsequent sonication, BP nanoflakes were obtained in high yields by EPD, allowing for the integration of these nanoflakes into an anode in the film state. Anodes with a charge/discharge capacity of 172 mAh/g at a rate of 200 mA/g were obtained, which are promising for battery applications through various post-film treatments.

• Journal of the Korean institute of surface engineering
• /
• v.26 no.3
• /
• pp.109-114
• /
• 1993

Black magnetite film could be formed on Invar steel for shadows mask by iron electroplating in thickness of 0.46~0.63$\mu\textrm{m}$ on Invar steel and subsequent oxidation of iron by immersion in strongly alkaline soution for 30~60 minutes. blackness degreed of magnetite oxide film on Invar was C20BL90 in comparision of color chart of Dainippon Ink & Chemicals Inc. Co. and adhesion test showed excellent adhesion of oxide film on substrate. Magnetite oxide film grew up on iron in hot strongly alkaline solution according to 'Sato-Cohen' oxide film growth model.

• Journal of the Korean Society for Heat Treatment
• /
• v.15 no.5
• /
• pp.213-218
• /
• 2002

In order to develop the economic and environmental water-soluble black coloring agent, some adequate chemical mixtures were mixed and this solution was applied to coat quenched and tempered 51B20 steel bolt. Some basic properties of the solution and characteristics of the coated film in addition to the corrosion resistance were investigated. The developed 100 kg of water-soluble black coloring agent solution was a chemical mixture consisted of 10 kg of aqueous coloring agent, 40 kg of surface active agent, 0.3 kg of anti-foam agent and $50{\ell}$ of water. The coated film of the bolt was composed of hard layer of about $2{\mu}m$ and the disbondable soft layer of about $4{\mu}m$ above the hard layer. Many surface active agents peaks and a few hydrophilic peaks were observed in the coated film. Surface roughness value of the coated bolt was lower than that of the non-coated bolt. Corrosion resistance of the coated bolt considerably improved and also relatively showed a good polarization resistance at test condition of $40^{\circ}C$ colorizing temperature and 5% the solution concentration in 3% NaCl anodic polarization test. Initial appearance time of the surface rust was greatly retarded owing to the coated film in salt spray test.