• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.760-763
• /
• 2002

본 논문은 인체의 머리진동 측정용 Bite-bar에 관한 연구이며, 머리진동의 관심주파수 영역인 0.5∼30Hz 범위의 주파수 범위에서 ICP형 가속도계를 이용한 바이트-바(Bite-bar)의 공진특성에 관한 실험결과와 공진특성의 보상 방법에 관해 기술하고 있다. 또한 바이트-바(Bite-bar)의 회전비교교정에 관한 방법과 절차 그리고 실험결과를 제시하고 바이트-바(Bite-bar) 교정의 중요성과 오차(error)와 설계 제작에 있어서의 주의사항에 관해 간략히 소개한다.

• 한국소음진동공학회논문집
• /
• 제15권1호
• /
• pp.20-28
• /
• 2005

이 논문에서는 기존의 6-축 혹은 9-축 머리진동 측정장치(bite-bar)를 이용한 머리진동 측정에서 직면하는 불확도 인자들에 대한 문제점을 우선 소개한다. 이들 불확도 인자들은 머리의 6-자유도 운동 성분의 추정에 필요한 모든 측정 요소들을 측정하지 않았다는 한계점에서 유발함을 보인다. 이러한 문제점을 극복하기 위하여 4개의 3축 가속도 센서로 구성된 새로운 머리진동 측정장치(12-axis bite-bar)의 모델을 제안한다. 본 모델은 측정 기준점에서의 선형 3축 가속도 뿐 아니라 3축 각 가속도와 함께 6 종의 2차 각속도 성분들의 추정 또한 가능하게 한다. 이러한 12 성분의 추정 모델로부터 비로소 머리의 임의 점에서 6-자유도 운동 성분의 계산이 가능함을 이론적으로 규명한다. 이러한 이론적 배경에 기반을 두고 설계 제작된 12-축 머리진동 장치(12-axis bite-bar)를 소개한다. 본 장치를 이용하여 얻어진 실험 결과 소개 뿐 아니라 기존의 측정장치의 측정 결과와 비교 분석 내용을 소개한다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.1105-1110
• /
• 2001

본 논문은 머리진동 측정용 바이트 바의 동적 특성에 관한 연구이다. 머리진동의 관심주파수 영역은 0.5Hz~30Hz 범위의 주파수이며 기구학적 이론들을 이용하여 측정된 선형 가속도로부터 머리의 각각속도를 계산하는 과정을 소계한다. 본 논문에서는 9개의 선형가속도를 이용하여 각각속도를 구하는 방법에 대한 검증뿐 아니라 나아가 센서의 측정점의 Offset 영향을 고려한 이론식을 제시한다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.101-104
• /
• 2004

This paper addresses uncertainty issues encountered recently in measuring head vibration using the conventional 6-axis or 9-axis bite-bar Those conventional bite-bars are shown to present insufficient information to measure a complete 6 degree-of-freedom motion of head vibration. In order to overcome such limit, a theoretical measurement model that consists of four 3-axis linear accelerometers is suggested (Theoretical backgrounds presented in this paper shall have been addressed in the international congress of ICA 2004 in this April). It is shown to enable the direct measurement of three angular acceleration components and six angular velocity-dependent nonlinear terms. In audition to the three linear acceleration terms, those nine angular motion-dependent ones are found to make it possible to evaluate the general head vibration for a given position. To examine the feasibility of the proposed method, a newly designed 12-axis bite-bar was developed. Detailed experimental results obtained using the developed 12-axis bite-bar are illustrated in the presentation of this paper, which illustrates what amount of measurement accuracy provides. But, this paper provides more detailed experimental data and extended uncertainty factors.

• 대한치과교정학회지
• /
• 제14권1호
• /
• pp.161-172
• /
• 1984

This study was undertaken to evaluate the cephalometric changes of the soft tissue and skeletal profile subsequent 10 the rapid palatal expansion in 25 Angle's Class III cases, ranging in age from six to fifteen years, with cross-bite of the anterior teeth, underdevelopment of maxilla and facial disharmony Following results were obtained: 1. ANS moved downward, Point A presented forward & downward movement increasing SNA and Point B presented backward & downward movement decreasing SNB. 2. Mandible was rotated to backward & forward and maxilla moved forward & downward with the bite opening and improvement of anterior teeth cross-bite. 3. Soft tissue on mandible was rotated to backward & forward following hard tissue changes causing the decrease of facial convexity angle and backward & downward rotation of Point B', Pog'. 4. Response of the upper lip was more significant in downward than forward direction, and correlated with the upper central incisor and mandible rotation. 5. Response of the lower lip was more significant in downward than backward direction, and correlated with the mandible rotation. 6. There was a rather high degree of correlation between skeletal profile and soft-tissue profile, 1 : LS, $\bar{1}$:Pog', Pog:LS, Pog:LI, Pog:Pog' in horizontal measurements and $\bar{1}$:Pog', Pog:LI, Pog:Pog' in vertical measurements.

• 소음진동
• /
• 제11권1호
• /
• pp.76-81
• /
• 2001

This paper addresses experimental results carried out to investigate the transmission of seat vibration to the head for Korean. Vertical seat vibration in the frequency range of 0.5-30 Hz was applied to a seated Korean male subject. To examine the intra-variable effects on transmissibility, five different postures and three different vibration excitation levels were considered. The applied acceleration and head accelerations of the seated subject were measured simultaneously by using a 6-axes bite-bar. Detailed experimental results of measured transmissibilities are illustrated for each posture and/or vibration excitation level, and they were compared to an International Standard. They are found to allow the identification of dynamic characteristics of Korean seated body for various reat vibration environments. Furthermore, they are expected to be very useful in designing new seats for automotive and railway vehicles and in improving their vibration ride quality.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.138-143
• /
• 2000

This paper addresses experimental results carried out to investigate the transmission of seat vibration to the head for Korean. Vertical seat vibration in the frequency range of 0.5-30 Hz was applied to a seated Korean male subject. To examine the intra-variable effects on transmissibility, five different postures and three different vibration excitation levels were considered. The applied acceleration and head accelerations of the seated subject were measured simultaneously by using a 6-axes bite-bar. Detailed experimental results of measured transmissibilities are illustrated for each posture and/or vibration excitation level. They are found to allow the identification of dynamic characteristics of Korean seated body for various real vibration environments. Furthermore, they are expected to be very useful in designing new seats for automotive and railway vehicles and in improving their vibration ride quality.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제17권2호
• /
• pp.171-179
• /
• 1995

The conservative treatment of the condylar fracture has been used for a long time because of its simplicity, good prognosis and less complication. Traditionally the conservative treatment has been carried out by maxillomandibular fixation using arch bar and wire. But a simplified technique of maxillomandibular fixation introduced here is a procedure that 4 bone screws are placed above the apecies of the maxillary and mandibular canines and then ipsilaterally placed maxillary and mandibular bone screws are linked by a loop of wire each other. This procedure has several advantages compared with the traditional maxillomandibular fixation method. 1) it provides simplicity for the operators. 2) it sustains maxillomandibular fixation more rigidly compared with arch bar technique. 3) it keeps stable maxillomandibular fixation in the region of the anterior teeth so that anterior open bite tendency can be remarkably minimized. 4) it does not injure the periodontal tissue because the teeth are not engaged and causes less discomfort to the patient. 5) it decreases the possibility of operator's AIDS infection through inadvertent skin puncture. 6) it is highly recommended for the patients whose teeth are available for maxillomandibular fixation. The two male patients were diagnosed as bilateral condylar and symphyseal fracture of the mandible. They restored stable occlusion and functional mandibular movement only by a simplified technique of maxillomandibular fixation.

• 대한치과보철학회지
• /
• 제60권4호
• /
• pp.374-381
• /
• 2022

본 증례는 74세 남환으로 20년 전 제작한 하악 임플란트 피개의치의 잦은 탈락을 주소로 내원하였다. 기존 의치 사용 시 수직고경이 감소되었으며, 상악 총의치는 입술 지지 및 유지력이 부족하였으며, 하악 피개의치는 bar attachment 손상으로 clip의 유지력 부족이 관찰되었다. 손상된 bar attachment를 제거 후 ball attachment로 교체하였으며, DENTCATM Tray를 이용하여 인상 채득, 수직고경을 측정하고, 고딕 아치 기록방법으로 중심위를 결정하여 교합기록을 시행하였다. 채득한 인상체를 스캔하여 소프트웨어를 이용하여 최종 의치의 형태를 디자인하였고, 3D 프린터로 시적의치를 제작하였다. 제작된 시적의치를 장착하여 교합평면 및 교합관계, 안모 형태, 발음 등을 평가한 후 교합기록을 하였으며, 이를 바탕으로 최종 의치를 제작하였다. 최종 의치의 내면 조정 및 양측성 균형교합을 형성하였으며, 하악 의치에서는 직접법으로 attachment를 연결하였다. 새로 제작된 상하악 의치 사용 시, 수직고경의 증가 및 입술지지를 회복하여 개선된 안모가 관찰되었으며, ball attachment 교체로 하악 임플란트 피개의치의 유지력이 증가하여 기능적으로도 만족할 만한 결과를 얻었기에 이를 보고하는 바이다.

• The Journal of the Acoustical Society of Korea
• /
• 제24권1E호
• /
• pp.7-15
• /
• 2005

This paper addresses issues encountered in measuring the general, 6-degree-of-freedom motion of a human head, A complete mathematical description for measuring the head motion using the six-accelerometer configured bite-bar is suggested, The description shows that the six-axis vibration cannot be completely obtained without the roll, pitch and yaw angular velocity components, A new method of estimating the three orthogonal (roll, pitch and yaw) angular velocities from the six acceleration measurements is introduced. The estimated angular velocities are shown to enable further quantitative error analysis in measuring the translational and angular accelerations at the head. To make this point clear, experimental results are also illustrated in this paper. They show that when the effects of angular velocities are neglected in the head vibration measurement the maximum percentage errors were observed to be more than $3 \%$ for the angular acceleration of the head and to be close to $5 \%$ for its translational acceleration, respectively. It means that the inclusion of all the angular velocity dependent acceleration components gives more accurate measurement of the head vibration.