• The Journal of Korean Academy of Prosthodontics
• /
• v.31 no.1
• /
• pp.77-86
• /
• 1993

The purpose of this study was to compare the sagittal condylar guidance obtained by the graphic method(pantographic tracing) with that produced by the positional method(check-bite). Ten adults who had normal occlusion and were free of TMJ dysfunction were selected, and the clutches were constructed. At first pantographic survey was performed and the articulator was adjusted with each pantographic recording. And then three protrusive check-bite were taken on the subjects using the polyether$(Lamitec^{(R)})$ on the buccal side of the posterior teeth without the interocclusal record method and the vericheck method was performed with each protrusive check-bite. Sagittal condylar guidances obtained by using the pantograph and Vericheck were compared and analyzed statistically. The results were as follows: 1. The average condylar guidance ankle at 4mm and 7mm from centric relation point on the pantograph $(35.9{\pm}1.10^{\circ},\;32.4{\pm}1.55^{\circ})$ was statisccally significant(P<0.01). 2. The average condylar guidance angle of the Vericheck was $27.0{\pm}3.43^{\circ}$. 3. The comparison of the right and left was not statistically significant in all group(P>0.05). 4. The comparison of pantograph and Vericheck was statistically significant in the right and left(P<0.001).

• The korean journal of orthodontics
• /
• v.13 no.1
• /
• pp.63-72
• /
• 1983

The author was to study the types and distribution of malocclusion in the 1217 patients with diagnostic charts, cephalograms and study models, who have been treated from March, 1973 to August, 1982 in the Department of orthodontics, Infirmary of Dental College, Yon Sei University. The results were as follows; 1. In the Angle's classification of malocclusion, it was presented that class I malocclusion was 671 persons $(55.1\%)$, class II division 1 malocclusion was 241 persons $(19.8\%)$, class II division 2 malocclusion was 30 persons $(2.5\%)$ and class III malocclusion was 275 persons $(22.6\%)$. 2. In the Angle's class I malocclusion, the crowding was most remarkable $(39\%)$ 3. In the Angle's class II malocclusion, 88 persons $(32.5\%)$ were due to the undergrowth of the mandible, and deep bite was most frequent. 4. In the Angle's class II malocclusion, 94 persons $(34.2\%)$ were .in the pseudo type, 84 persons $(29.8\%)$ were due to the overgrowth of the mandible, and openbite and edge to edge bite were most frequent. 5. In the sexual distribution of the patients, female patients were 791 persons $(65\%)$, male patients were 426 persons $(35\%)$, and the number of females was 1.8 times than that of males. 6. In the age distribution of the patients, 572 persons $(47\%)$ were in the 9-13 years old. 7. In the regional distribution of the patients, most of them lived near the hospital.

• The korean journal of orthodontics
• /
• v.9 no.1
• /
• pp.39-65
• /
• 1979

The purpose of this study was to investigate the pattern of irregularities of teeth in various malocclusion groups. The subjects consist of 803 out-patients (355 males, and 448 females) in department of Orthodontics of S.N.U. Hospital, Yonsei University, and Kyunghi University Hospital. The results were as follows. 1. The proportions of subjects on the basis of Angle's Classification were 39.2% (42.2% male, and 57.8% fomale) in class I malocclusion, 29.0% (44.6% male, and 55.4% female) in class II. div. 1., 3.5%(46.4% male, and 53.6% female) in class II. div. 2., 28.3%(46.3% male, and 53.7% female) in class III. 2. Considering all the subjects, the percentage of teeth crowding was 67.8% (45.0% male, and 55.0% female). In class I malocclusion, the percentage of Crowding was 70.8%(43.5% male, and 56.5% female) with higher frequency in upper anterior teeth than in lower anterior. 3. The percentage of Maxillary anterior diastema was 25.6% (45.6% male, and 54.4% female) on the whole. In class II. div. 1. malocclusion, the percentage was 28.8% (46.3% male, and 53.7% female) and in class III, the percentage was 19.8% (46.7% male, and 53.3% female). Thus, frequency of maxillary anterior distema, was comparatively higher in class II. div. 1. than in class III. 4. The percentage of high canine was 25.1% (53.2% male, and 46.8% female) on the whole, and was 86.0% male and 76.6% female in right side, 73.0% male and 72.3% female in left side. In calss II. div. 2., the percentage was 53.6% (46.7% male, and 53.3% female ). In class II. div. 1., the percentage was 16.7% (46.2% male, and 53.8%) with higher frequency in class II. div.2. 5. The percentage of deep overbite was 23.0% (43. 2% male, and 56.8% female) on the whole. Ia class 11. div. 2., and in clas sll. div. 1., its were 89.3%(48.0% male and 52.0% female), 54.5% (40.9% male, and 59.1% female) respectively. This result can be considered as one of the characterics of Angle's class 11 malocclusion group. 6. The percentage of spacing was 23.0% (36.8% male, and 63.2% female) on the whole, In class II. div. 1., and in class II. div. 2., its were 26.1% (44.3% male, and 55. 7% female), 7.1% (50.0% male, and 50.0% female) respectively. 7. The percentage of open bite was 14.3% (42.6% male, and 57.4% female) on the whole with higher rate on the anterior part. It rated 17.6%(50. 0% male, and 50.0% female) in class III, but none in class II. div. 2. 8. The percentage of crossbite was 22.5% (55.8% male, and 44.2% female) on the whole, with higher frequency on the anterior part than on the posterior part. In Angle's class III, it rated as much as 55.1% (57.6% male, and 42.4% female). 9. The percentage of edge-to-edge bite was 20.4% (47.6% male, and 52.4% female) with higher frequency on anterior part than on posterior part. 10. The percentage of irregularities of teeth in various malocclusion groups, was 21.5% (24.8% maxillary, and 18.1% mandible) in crowding, 20.8% (23.5% maxillary, and 18.0% mandible) in rotation, 10.7% (10.6% maxillary, and 10.8% mandible) in cross bite, 9.5% (11.8% maxillary, and 7.3% mandible) in spacing, 8.5% (8.5% maxillary, and 8.5% mandible) in edge-to-edge bite, 8.1% (8.3% maxillary, 7.8% mandible) in open bite. Crowding teeth, spacing teeth, and rotating teeh were more prevalent in anterior part than in posterior part. Cross bite teeth and edge-to-edge bite teeth were more prevalent in class III malocclusion than in another.

• Journal of Oral Medicine and Pain
• /
• v.32 no.3
• /
• pp.293-303
• /
• 2007

The purpose of this paper is to evaluate if there is a relationship between anterior disc displacement without reduction and development of anterior open bite, and a relation between occurrence of open bite and occlusal appliance therapy. In general, the statistically significant differences were found between the Group 1 and 2 and normal mean group. The variables that represent mandibular size and form, showed a statistical significance in all 3 groups. Also 3 groups patients had a smaller ANB, a larger FMA than normal mean group. When we compared the 3 groups with respect to all cephalometric measurements by One-way analysis of variance (ANOVA), group 1 and 2 patients had a larger FMA, a larger SN to mandibular plane angle, a larger maxillomandibular plane angle, a larger occlusal plane to mandibular plane angle, a smaller total posterior facial height/total anterior facial height(%), and a larger gonial angle than group 3. The statistically significant differences were not found between the Group 1 and 2, and skeletal patterns were similar. Thus, morphologic features of patients with vertical discrepancies may represent a risk factor for the development of anterior open bite with or without occlusal appliance treatment. In case of patients with vertical discrepancy, we may have to be more careful when inducing a change of the vertical dimension.

• The korean journal of orthodontics
• /
• v.30 no.5 s.82
• /
• pp.521-533
• /
• 2000

This study was investigated to evaluate the morphologic characteristics of openbite and deep bite in Class I malocclusion patients and to find skeletodental factors which contributed to vertical discrepancy in Class I malocclusion. The subjects were consisted of 40 control subjects (male 20, female 20) and 40 Class I openbite patients and 40 Class I deep bite patients. Lateral cephalograms in centric occlusion were taken, traced and digitized lot each subjects. The computerized statistical analysis were carried out with SPSS program. The results were as follows. 1. The pattern of vortical discrepancy in Class I malocclusion is mainly influenced by the skeletodental factors under palatal plane. 2. In openbite group, vortical discrepancy is prominent on anterior lower face and is closely related with skeletal factors such as mandibular form and inclination. 3. In deep bite group, dental factors such as ewe of Spee, vertical height of maxillary molar and skeletal factor such as articular angle were contributed to the vertical discrepancy. 4. The multiple regression analysis showed that overbite in Class I molar relationship was determined mainly by dental factors such as lower incisor to occlusal plane angle, curve of Spee, interincisal angle, and ODI.

• The Journal of Korean Academy of Prosthodontics
• /
• v.31 no.3
• /
• pp.394-410
• /
• 1993

This study was accomplished for appreciation of the mandibular moments according to antero- posterior movement of pivot placed on the lower natural dentition. For this study, 20 subjects(male, $21\sim30$ yrs., average age 24) in the category of normal occlusion were selected, and the intraoral Vitallium clutches were cast and fabricated for each subjects. A 2-dimension PSD(Position Sensitive Detector, Hamamatsu Photonics Co., Japan) was attached to maxillary clutch in a mode of three dimensional control and LED (Light Emit Diode, Hamamatsu Photonics Co., Japan) was set up on mandibular clutch. Both clutches were set into oral cavity of each subjects and adjusted. Then the subjects were allowed to intercuspated with maximal bite force while the pivoting ball in the mid-line moving from anterior toward posterior position. The displacement scales were recorded by CCD camera(Sony, CCD-TR-705) and VCR, The conclusions were as follows : 1. When the subject was allowed to bite the metal pivoting ball in the midline of lower dentition with maximal bite force voluntarily while moving from lower central incisor to canine, 1st premolar, End premolar, 1st molar and 2nd molar. The lever actions on the pivot were revealed in all subjects. The equilibrium of moment were revealed on the pivots of 1st premolar(14 subjects), End premolar(4 subjects), and canine(2 subjects) areas. 2. The changes of loading on the TMJ according to antero-posterior positional changes of metal pivoting ball were able to recognize as follow. Compression on the TMJ was increased when the pivot moves anteriorly from the equilibrium point, and tension on the TMJ was increased when posteriorly. 3. 13 subjects were recognized their habitual chewing sides(Rights, Left8), and 7 subjects were not. During maximal biting, mandible was displaced toward their habitual chewing sides on the metal pivoting ball in the frontal plane. 4. In cephalometric analysis, the average genial angle of 20 subjects was $116.75^{\circ}$ and the average mandibular body length was 79.77mm. The equilibrium points of mandibular moment were positioned more posteriorly in the subjects having larger Genial angle than in the smaller(p<0.05). Relationships among the angle between FH plane and occlusal plane, the angle between occlusal plane and mandibular plane , and mandibular body length were not significant(p>0.05).

• The korean journal of orthodontics
• /
• v.12 no.1
• /
• pp.31-36
• /
• 1982

20 years old female patient with asymmetric mandibular prognathism had anterior openbite, anterior cross-bite and mandibular shift. This patient was treated with both orthodontic and surgical method. Maxillary second molars were extracted to reduce the wedging effect and maxillary first molars moved to distal by straight pull head gear. After orthognathic surgery, open-bite was corrected with multiple shoe-loop arch wire.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.21 no.2
• /
• pp.415-423
• /
• 1991

This study was performed to evaluate the geometric standardization of periapical intraoral radiography. Image distortion was measured by analysing serial radiography obtained from dry skull using 5 types of bite registration device. After 16 weeks, the angular distortion of Pattern resin was 0.26±0.14 degree(Horizontal angle 0.17±0.14, Vertical angle 0.16±0.11) which was the lowest among the 5 registration device, and that of putty type Exaflex was 0.49±0.35 degree(Horizontal angle 0.42±0.35, Vertical angle 0.17±0.13) which was the highest. The mean amount of distortion variance of Tooth shade acrylic at each experimental period was 0.06±0.08 which was the lowest among the 5 registration device, and that of XCP alone was 0.ll±0.13 which was the highest.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.10a
• /
• pp.236-241
• /
• 2000

In the present industry, there is not only the cutting of iron metal, but also the cutting of alloy aluminum, brass and plastic to wood(Paulownia). A variety of material is used and these industry is made need of the cutting material but lots of experiments processing is not enough at the moment. At this point, our team processed the basic experiment about influencing of cutting angle of bite concerned to manufacture in the turning of non-iron metal. Generally speaking, we recognized that there was occurrence of increase of rough surface with increasing of cutting angle in the non-iron metal. but in the cutting of wood we knew, there was special change with change of cutting angle.

• Journal of Power System Engineering
• /
• v.6 no.1
• /
• pp.82-87
• /
• 2002

Not only ferrous but also non-ferrous materials such as aluminum, brass, plastic and woods need cutting operation in recent manufacturing industry. Over the past few years a considerable number of studies have been made on non-ferrous metal cutting. But more study is required to meet various engineering needs. The purpose of this paper is to preform an experiment on the influence of feed-rate adjustment and side rake angle in turning operations from non-ferrous metals. As a result, the surface roughness was reduced when a side-rake angle increases and feed-rate decreases in the case of the plastic, brass, aluminum, and paulownia. Therefore, this papers develop a new type bite that be used to adjust side-rake angle.