• IEIE Transactions on Smart Processing and Computing
• /
• v.5 no.5
• /
• pp.337-345
• /
• 2016

Recently, as the number of cores in computer systems has increased, the need for larger memory capacity has also increased. Unfortunately, dynamic random access memory (DRAM), popularly used as main memory for decades, now faces a scalability limitation. Phase change memory (PCM) is considered one of the strong alternatives to DRAM due to its advantages, such as high scalability, non-volatility, low idle power, and so on. However, since PCM suffers from short write endurance, direct use of PCM in main memory incurs a significant problem due to its short lifetime. To solve the lifetime limitation, many studies have focused on reducing the number of bit flips per write request. In this paper, we describe the PCM operating principles in detail and explore various bit flip reduction schemes. Also, we compare their performance in terms of bit reduction rate and lifetime improvement.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.13 no.5
• /
• pp.443-450
• /
• 2013

This paper propose a new ROM data encoding method that takes into account of a sequential access pattern to reduce the power consumption in ROMs used in applications such as FIR filters that access the ROM sequentially. In the proposed encoding method, the number of 1's, of which the increment leads to the increase of the power consumption, is reduced by applying an exclusive-or (XOR) operation to a bit pair composed of two consecutive bits in a bit line. The encoded data can be decoded by using XOR gates and D flip-flops, which are usually used in digital systems for synchronization and glitch suppression. By applying the proposed encoding method to coefficient ROMs of FIR filters designed by using various design methods, we can achieve average reduction of 43.7% over the unencoded original data in the power consumption, which is larger reduction than those achieved by previous methods.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.483-485
• /
• 2010

A 200kS/s 10-bit successive approximation(SA) ADC with a rail-to-rail input range is proposed. The proposed SA ADC consists of DAC, comparator, and successive approximation register(SAR) logic. The folded-type capacitor DAC with the boosted NMOS switches is used to reduce the power consumption and chip area. Also, the time-domain comparator which uses a fully differential voltage-to-time converter improves the PSRR and CMRR. The SAR logic uses the flip-flop with a half valid window, it results in the reduction of the power consumption and chip area. The proposed SA ADC is designed by using a $0.18{\mu}m$ CMOS process with 1V supply.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.12
• /
• pp.1882-1889
• /
• 2021

This paper describes a high-performance hardware implementation of modular multiplication used as a core operation in elliptic curve cryptography. A 521-bit high-performance modular multiplier for NIST P-521 curve was designed by adopting 3-way Toom-Cook integer multiplication and fast reduction algorithm. Considering the property of the 3-way Toom-Cook algorithm in which the result of integer multiplication is multiplied by 1/3, modular multiplication was implemented on the Toom-Cook domain where the operands were multiplied by 3. The modular multiplier was implemented in the xczu7ev FPGA device to verify its hardware operation, and hardware resources of 69,958 LUTs, 4,991 flip-flops, and 101 DSP blocks were used. The maximum operating frequency on the Zynq7 FPGA device was 50 MHz, and it was estimated that about 4.16 million modular multiplications per second could be achieved.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.11 no.2
• /
• pp.104-110
• /
• 2011

A CMOS Image Sensor (CIS) mounted on mobile appliances requires low power consumption due to limitations of the battery life cycle. In order to reduce the power consumption of CIS, we propose novel power reduction techniques such as a data flip-flop circuit with leakage current elimination and a low power single slope analog-to-digital (A/D) converter with a sleep-mode comparator. Based on 0.13 ${\mu}m$ CMOS process, the chip satisfies QVGA resolution (320 ${\times}$ 240 pixels) that the cell pitch is 2.25 um and the structure is a 4-Tr active pixel sensor. From the experimental results, the performance of the CIS has a 10-b resolution, the operating speed of the CIS is 16 frame/s, and the power dissipation is 25 mW at a 3.3 V(analog)/1.8 V(digital) power supply. When we compare the proposed CIS with conventional ones, the power consumption was reduced by approximately 22% in the sleep mode, and 20% in the active mode.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.1
• /
• pp.75-82
• /
• 2000

In this paper, a new low power 16-bit ALU has been designed, fabricated and tested at the transistor level. The designed ALU performs 16 instructions and has a two-stage pipelined architecture. For the reduction of switched capacitance, the ELM adder of the proposed ALU is inactive while the logical operation is performed and P(propagation) block has a dual bus architecture. A new efficient P and G(generation) blocks are also proposed for the above ALU architecture. ELM adder, double-edge triggered register and the combination of logic style are used for low power consumption as well. As a result of simulations, the proposed architecture shows better power efficient than conventional architecture$^{[1,2]}$ as the number of logic operation to be performed is increased over that of arithmetic to logic operation to be performed is 7 to 3, compared to conventional architecture. The proposed ALU was fabricated with 0.6${\mu}m$ single-poly triple-metal CMOS process. As a result of chip test, the maximum operating frequency is 53MHz and power consumption is 33mW at 50MHz, 3.3V.