• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.4
• /
• pp.684-690
• /
• 2009

In this paper, we proposed a new method of the steganography based on bit plane using similarity. Applying a fixed threshold, the insert information into all bit planes showed different image quality. Therefore, we first defined the bit plane of block similarity to solve the fixing threshold problem. We then proposed a new method using the Bit Plane complexity and similarity to insert information into bit planes of block. In the experiment, we inserted information into the standard images with the same image quality and same insertion capacity. Finally analyzed the insertion capacity and image quality. As a result, the proposed method increased the insertion capacity of about 6% and improved the image quality of about 3.3dB than fixing threshold method.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11a
• /
• pp.57-60
• /
• 2004

This paper presents multibit Sigma-Delta ADC using Leslie-Singh Structure to Improve nonlinearity of feedback loop. 4-bit flash ADC for multibit Quantization in Sigma Delta modulator offers the following advantages such as lower quantization noise, more accurate white-noise level and more stability over single quantization. For the feedback paths consisting of DAC, the DAC element should have a high matching requirement in order to maintain the linearity performance which can be obtained by the modulator with a multibit quantizer. Thus a Sigma-Delta ADC usually adds the dynamic element matching digital circuit within feedback loop. It occurs complexity of Sigma-Delta Circuit and increase of power dissipation. In this paper using the Leslie-Singh Structure for improving nonliearity of ADC. This structure operate at low oversampling ratio but is difficult to achieve high resolution. So in this paper propose improving loop filter for single-bit feedback multi-bit quantization Sigma-Delta ADC. It obtained 94.3dB signal to noise ratio over 615kHz bandwidth, and 62mW power dissipation at a sampling frequency of 19.6MHz. This Sigma Delta ADC is fabricated in 0.25um CMOS technology with 2.5V supply voltage.

• Convergence Security Journal
• /
• v.10 no.2
• /
• pp.19-26
• /
• 2010

In this study, we try to make up for the vulnerability in steganography that it is easily revealed the hidden logo image in cover image by bit-plane extraction. For this, we apply some methods, the permutation which shift the scattered pieces of logo image to one side, bit-plane dispersion insertion method and pack-type compressor.

• Journal of the Optical Society of Korea
• /
• v.14 no.1
• /
• pp.22-27
• /
• 2010

Bit error rate (BER) monitoring is the ultimate goal of performance monitoring in all digital transmission systems as well as optical fiber transmission systems. To achieve this goal, optimization of the decision threshold must also be considered because BER is dependent on the level of decision threshold. In this paper, we analyze a pseudo-error counting scheme and propose an algorithm to achieve both BER monitoring and adaptive decision threshold optimization in optical fiber transmission systems. To verify the effectiveness of the proposed algorithm, we conduct computer simulations in both Gaussian and non-Gaussian distribution cases. According to the simulation results, BER and the optimum decision threshold can be estimated with the errors of < 20% and < 10 mV, respectively, within 0.1-s processing time in > 40-Gb/s transmission systems.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.11
• /
• pp.2465-2473
• /
• 2012

Recently, as one of low complexity video encoding methods, DVC (Distributed Video Coding) scheme has been actively studied. Most of DVC schemes exploit feedback channel to achieve better coding performances, however, this causes these schemes to have high decoding delay. In order to overcome these, this paper proposes a new fast DVC decoding method using parity-bit request model, which can be obtained by using bit-error rate, sent by encoder with motion vector, which is transmitted through feedback channel by decoder after generating side information. Through several simulations, it is shown that the proposed method improves greatly the decoding speed, compared to the conventional schemes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.11C
• /
• pp.1030-1036
• /
• 2006

In this paper, we present two methods of correcting bit errors in constant amplitude multi-code (CAMC) CDMA, which uses the redundant bits only. The first method is a parity-based bit correction with hard-decision, where the received signals despread into n two-dimensional structure with both horizontal parity and vertical parity. Then, an erroneous bit is corrected for each $4{\times}4$ pattern. The second method is a turbo decoding, which is modified from the decoding of a single parity check product code (SPCPC). Experimental results show that, in the second method, the redundant bits in CAMC can be fully used for the error correction and so they are not really a loss of channel bandwidth. Hence, CAMC provides both a low peak-to-average power ratio and robustness to bit errors.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.161-162
• /
• 2011

Recently, many research works are focusing on DVC (Distributed Video Coding) system for low complexity encoder. However the feedback channel-based parity bit control is a major cause of the high decoding time latency. Spatial and temporal correlation is high in video and, therefore, the statistical property can be applied for the parity bit request of LDPCA frame. By introducing frame adaptive parity bit request estimation method, this paper proposes a new method for reducing the decoding time latency. Through computer simulations, it is shown that the proposed method achieves about 80% of complexity reduction, compared to the conventional no-estimation method.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.6 no.4
• /
• pp.3-38
• /
• 1996

The mobile station shall convolutionally encode the data transmitted on the reverse traffic channel and the access channel prior to interleaving. Code symbols output from the convolutional encoder are repeated before being interleaved except the 9600 bps data rate. All the symbols are then interleaved, 64-ary orthogonal modulation, direct-sequence spreading, quadrature spreading, baseband filtering and QPSK transmission. The sync, paging, and forward traffic channel except the pilot channel in the forward CDMA channel are convolutionally encoded, block interleaved, spread with Walsh function at a fixed chip rate of 1.2288 Mcps to provide orthogonal channelization among all code channels. Following the spreading operation, the I and Q impulses are applied to respective baseband filters. After that, these impulses shall be transmitted by QPSK. Authentication in the CDMA system is the process for confirming the identity of the mobile station by exchanging information between a mobile station and the base station. The authentication scheme is to generate a 18-bit hash code from the 152-bit message length appended with 24-bit or 40-bit padding. Several techniques are proposed for the authentication data computation in this paper. To protect sensitive subscriber information, it shall be required enciphering ceratin fields of selected traffic channel signaling messages. The message encryption can be accomplished in two ways, i.e., external encryption and internal encryption.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.5
• /
• pp.887-894
• /
• 2016

In the underwater acoustic communication channels, a multipath reflection becomes the cause of obstacle. To solve this problem, a rake receiver has been required for which one could take the time diversity. However, there is a concern about using incorrect path to recover signals with a high weighting value as underwater acoustic communication channels have severe time-variant property. In order to prevent these problem, a rake receiver is proposed which is based on BER(bit error rate) train sequence duration. The performance is evaluated through lake trials; there are three methods that are a proposed rake receiver, a conventional rake receiver, and a non-rake receiver. As a result, the number of bit errors in the proposed rake receiver, that of bit errors in the conventional rake receiver, and that of bit errors in the non-rake receiver is 8, 45, and 72, respectively.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.58
• /
• pp.267-286
• /
• 2013

Origin verification is regarded most essential for FTA performance administration. This administration is divided into direct and indirect system where Korea has adapted indirect system to Korea-EU FTA while direct system to Korea-USA FTA. A comparative analysis was conducted on the system of origin verification and provisions contained in preferential tariff law of each countries. The study finds that Korean origin verification system is a bit lack of procedural provision resulting in less protection of domestic trader's rights. Another point is that Korean Customs Authority is weak, in respect of organization and man power, to protect illegal bilateral tariff application by counter part FTA countries. And therefore this study suggests the policy makers to arrange detailed FTA origin verification procedures with earliest meeting with counter part FTA countries, and further stress that make up of organization and man power for origin verification in a timely manner.