• 전자공학회논문지C
• /
• 제36C권1호
• /
• pp.59-65
• /
• 1999

MPEG-II 기반의 HDTV/DTV Encoder 구성부중 하나인 엔트로피 부호화기(entropy encoder)를 설계하였다. 설계된 엔트로피 부호화기는 생성된 비트스트림이 버퍼에 저장될 경우 버퍼의 고갈을 막기위해 제로 스터핑 블록을 첨가함으로써 9Mbps의 비트율로 출력된다. 또한, AC 계수와 DC 계수 table로 PROM이 아닌 조합회로를 사용하여 회로내부에 Critical path가 발생하지 않도록 하였다. 패커부의 경우 배럴 쉬프트 하나를 사용하여 24비트 단위로 패킹을 하도록 하였으며, 헤더정보 부호화부, 입력정보지연부, 부호화부 그리고 버퍼 제어부로 구성된다. 설계된 회로는 VHDL function 시뮬레이션을 통하여 검증하였고, 설계공정 파라미터로는 $0.8{\mu}m$ Gate Array 설계방식을 적용하여 Gate compiler로 P&R을 수행한 결과 전체 Layout의 핀 수와 Gate수는 각각 235개와 120,000개로 측정되었다.

• 방송공학회논문지
• /
• 제3권1호
• /
• pp.85-92
• /
• 1998

동영상 부호화에서 블록 정합 움직임 추정 기법은 움직임 추정 기법으로 가장 많이 쓰이고 있는 방법이다. 이 논문에서는 블록 정합 움직임 추정 기법의 하나로 최근에 제안된 공간적 상관 관계와 계층적 탐색방법을 이용한 고속 움직임 추정 알고리즘의 구현에 적합한 VLSI 구조를 제안한다. 제안된 구조는 systolic array에 바탕을 둔 탐색 기본 단위와 두 개의 shift register array등으로 이루어지며 수평/수직 -32~+31 화소 크기의 탐색을 수행한다. 이 때 탐색 기본 단위는 반복하여 사용하게 함으로써 게이트 수를 최소화하였다. 탐색 기본 단위의 구조로는 전역 탐색을 수행할 수 있는 기존의 여러 가지 systolic array 들이 사용 가능하며, 그 선택에 따라 칩의 크기와 속도 사이의 절충이 가능하다. 본 논문에서는 PE(processing element)의 개수를 줄여 전체적인 칩 사이즈를 줄이는데 중점을 두고 탐색 기본 단위의 구조를 결정하였다. 제안된 구조를 이용하면 $352{\times}288$ 크기의 영상, 탐색 영역 수평/수직 -32~+31 화소에 대해서 클럭 주파수가 35MHz일 때 최대 30Hz까지 실시간 처리를 할 수 있는 움직임 추정 칩을 20,000 게이트 이하로 구현할 수 있다. 더 높은 전송률의 입력 영상($720{\times}480$, 30Hz)에 적용할 경우에는 단순히 PE 개수를 늘리 구조를 탐색 기본 단위로 선택함으로써 실시간 구현이 가능하다.

• 디지털산업정보학회논문지
• /
• 제15권1호
• /
• pp.67-76
• /
• 2019

Despite attractive advantages such as good time-frequency localization and improved spectral efficiency, filter bank multicarrier with offset quadrature amplitude modulation (FBMC/OQAM) suffers from multipath fading. In highly frequency-selective channels, the effect of multipath interference can significantly distort the FBMC/OQAM signal due to the absence of cyclic prefix. To resolve the problem of the multipath interference in FBMC/OQAM, this paper proposes applying an antenna array that provides well shaped beam pattern for each multipath. To evaluate the performance of the proposed array system, various computer simulations have been conducted. The accuracy of direction of arrival estimation is demonstrated through spatial spectrum for a different number of antennas in a sub-array. The performance improvement is presented in terms of bit error rate. We found that the proposed array system mitigate the multipath interferences in Extended Typical Urban model with 12 antennas in a sub-array. Moreover, as the number of antennas in a sub-array increases, the system provides a signal-to-noise ratio gain.

• 제어로봇시스템학회논문지
• /
• 제22권8호
• /
• pp.671-677
• /
• 2016

A Controller Area Network (CAN) is a serial communication protocol that is highly reliable and efficient in many aspects, such as wiring cost and space, system flexibility, and network maintenance. Therefore, it is chosen for the communication protocol between a single chip controller based on Field Programmable Gate Array (FPGA) and peripheral devices. In this paper, the design and implementation of CAN IP, which is written in VHSIC Hardware Description Language (VHDL), is presented. The implemented CAN IP is based on the CAN 2.0A specification. The CAN IP consists of three processes: clock generator, bit timing, and bit streaming. The clock generator process generates a time quantum clock. The bit timing process does synchronization, receives bits from the Rx port, and transmits bits to the Tx port. The bit streaming process generates a bit stream, which is made from a message received from a micro controller subsystem, receives a bit stream from the bit timing process, and handles errors depending on the state of the CAN node and CAN message fields. The implemented CAN IP is synthesized and downloaded into SmartFusion FPGA. Simulations using ModelSim and chip test results show that the implemented CAN IP conforms to the CAN 2.0A specification.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -2
• /
• pp.1280-1283
• /
• 2002

This paper discusses issues in VLSI design and implementation of high performance datapath circuits. Of particular concern will he various types of multiplier and adder, which are fundamental to DSP operations. Performance comparison will be provided in terms of sampling speed, layout area, and in particular, power consumption, with techniques that may be applied to reduce power dissipation also suggested. As an example, a low power, high performance recursive filter achieved through bit-level pipelining technique is illustrated

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(2)
• /
• pp.97-100
• /
• 2001

A 3-way VLIW multimedia signal processor capable of efficient repeated operations as well as both load/store and type transformations for various data types is presented. It is composed of a 32-bit execution unit that can execute two instructions in parallel, an independent load/store unit and a control unit. The processor is implemented with 0.6${\mu}{\textrm}{m}$ gate array and the results are discussed.

• Journal of information and communication convergence engineering
• /
• 제3권4호
• /
• pp.176-178
• /
• 2005

This paper presents closed-form expressions for exact bit error rate of MSK and OQPSK systems employing an adaptive antenna array at base station to eliminate co-channel interference. The channels under consideration are AWGN and one-path flat Rayleigh fading with AWGN. Computer simulation is carried out to confirm the theoretical results.

• 대한원격탐사학회지
• /
• 제8권1호
• /
• pp.59-69
• /
• 1992

The IMAPRO sotfware package was mainly focused to provide an algorithm which is capable of displaying various color composite images on IBM PC, VGA(Video Graphic Array) card with no special hardware. It displays the false color images using a low-cost eight-bit place refresh buffer. This produces similar quality to the one obtained from image board with three eight-bit plane. Also, it provides user friendly menu driven method for the user who are not familier with technical knowladge of image processing. It may prove useful for universities, institute and private company where expensive hardware is not available.

• Transactions on Electrical and Electronic Materials
• /
• 제10권2호
• /
• pp.44-48
• /
• 2009

A simulation study of a 10-bit two-stage DAC was done by using a conventional current switch cell. The DAC adopts the segmented architecture in order to reduce the circuit complexity and the die area. The 10-bit CMOS DAC was designed in 2 blocks, a unary cell matrix for 6 MSBs and a binary weighted array for 4 LSBs, for fabrication in a 0.35-${\mu}m$ CMOS process. To cancel the accumulation of errors in each current cell, a symmetrical switching sequence is applied in the unary cell matrix for 6 MSBs. To ensure high-speed operation, a decoding circuit with one stage latch and a cascode current source were developed. Simulations show that the maximum power consumption of the 10-bit DAC is 74 mW with a sampling frequency of 100 MHz.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(2)
• /
• pp.201-204
• /
• 2000

In this paper, an A/D converter is implemented to obtain 8bit resolution at a conversion rate of 10Msample/s. This architecture is proposed using the 2-step architecture for high speed conversion rate. It is consisted of sample/hold circuit, low power comparator, voltage reference circuit and DAC of binary weighted capacitor array. Proposed A/D converter is designed using 0.2$\mu\textrm{m}$ CMOS technology. The SNR is 45.3dB at a sampling rate of 10MHz with 1.95MHz sine input signal. When an 8bit 10Msample/s A/D converter is simulated, the Differential Nonlinearity / Integral Nonlinearity (DNL/ INL) error are ${\pm}$1 / ${\pm}$2 LSB, respectively. The power consumption is 13㎽ at single +2.5V supply voltage.