• Applied Chemistry for Engineering
• /
• v.3 no.1
• /
• pp.111-118
• /
• 1992

The curing acceleration of epoxy/amine system was investigated by using differential scanning calorimeter(DSC), The epoxy, diglycidylether of bisphenol A (DGEBA) was cured with methylene dianiline (MDA) with or without accelerators. Two kinds of accelerators were tested for the study ; tris(dimethylaminomethyl)phenol (DMP - 30) and 3 - (3,4 - dichlorophenyl)-1, 1-dimethylurea (DIURON). Heats of reaction and glass transition temperatures ($T_g$) of the cured epoxy system were analyzed by DSC along with the estimation of activation energy by the dynamic DSC studies. It was found that DMP - 30 is more effective accelerator than DIURON which showed faster curing and lower activation energy.

• Textile Coloration and Finishing
• /
• v.33 no.2
• /
• pp.79-86
• /
• 2021

This study investigated the effect of a pigment (C. I. Pigment Red 122) addition on mechanical properties of the epoxy resin, diglycidyl ether of bisphenol F (DGEBF) and G640 curing agent. The K/S value, thermal properties, tensile properties, and fracture toughness of the prepared epoxy samples were evaluated. When the pigment was added to the DGEBF/G640 epoxy system, the color of the epoxy resin changed to red from transparent and yellowish color, and the K/S value in the red region increased as the pigment content increased. When the pigment content was increased up to 0.1 phr, the tensile strength was improved up to 21.8 %, whereas the pigment content was over 0.1 phr, the tensile strength decreased. The fracture toughness was improves up to 23.1 % until the amount of pigment added was up to 0.2 phr, and then decreased when the amount of the pigment added was more than 0.2 phr. This attributed to the aggregation of the pigments in the epoxy resin when the amount of the pigment added was more than 0.2 phr. Therefore, the coloration of the epoxy resin with an organic pigment must be carried out very carefully because the coloration of epoxy resin affects its mechanical properties.

• Journal of the Korean Chemical Society
• /
• v.68 no.4
• /
• pp.191-198
• /
• 2024

Endocrine disrupting chemicals (EDCs) are compounds that come from outside the body and disrupt hormone action within the body's endocrine system. Examples include parabens, benzophenones, bisphenols, and phthalates, which are currently used in a wide range of applications. However, continuous exposure to them can have negative effects on glycemic control, reproduction, metabolism, nervous system development, pregnancy, childbirth, and growth. In this study, human samples (urine) were pretreated using liquid-liquid-extraction to determine the exposure level of EDCs and then analyzed effectively and rapidly by UPLC-MS/MS. In this way, the analytical conditions were established and the reliability of the simultaneous analysis method was evaluated through method validation. The results showed that the accuracy ranged from 75.28 to 122.36% and the precision ranged from 2.16 to 22.74%. The analytical method established in this study can be used as a methodology for future studies to evaluate and monitor the exposure of EDCs in human samples.

• Journal of Food Hygiene and Safety
• /
• v.27 no.4
• /
• pp.349-355
• /
• 2012

In this study, we configured a system which ranks hazardous chemicals to determine their management priorities based on experts' opinions and the existing CRS (chemical ranking and scoring). Aggregate exposure of food, health functional food, oriental/herbal medicine and cosmetics have been taken into account to determine management priority. In this study, 25 hazardous chemicals were selected, such as cadmium, lead, mercury, and arsenic, etc. These 25 materials were ranked according to their 1) risk (exposure or hazard) indexes, 2) exposure source-based weight, and 3) public interests, which were also formed based on the existing priority ranking system. Cadmium was scored the highest (178.5) and bisphenol A the lowest (56.8). Ten materials -- cadmium, lead, mercury, arsenic, tar, acrylamide, benzopyrene, aluminium, benzene, and PAHs -- scored higher than 100. Eight materials -- aflatoxin, manganese, phthalate, chromium, nitrate/nitrite, ethylcarbamate, formaldehyde, and copper -- recorded scores in the range from 70 to 100. Also evaluated as potential risks were 7 materials; sulfur dioxide, ochratoxin, dioxins, PCBs, fumonisin, methyl mercury, and bisphenol A, and these materials were scored above 50. Then we compared risk index and correlation coefficient of total scores to confirm the validity of the total scores; we analyzed correlation coefficient of parameter and indicator. We discovered that the total score and weight, which has incorporated public interests, were high and statistically significant. In conclusion, the result of this study contributes to strengthening risk assessment and risk management of hazardous chemicals.

• Restorative Dentistry and Endodontics
• /
• v.34 no.1
• /
• pp.42-50
• /
• 2009

Deterioration of long-term dentin adhesion durability is thought to occur by hydrolytic degradation within hydrophilic domains of the adhesive and hybrid layers. This study investigated the hypothesis that priming the collagen network with an organic solvent displace water without collapse and thereby obtain good bond strength with an adhesive made of hydrophobic monomers and organic solvents. Three experimental adhesives were prepared by dissolving two hydrophobic monomers, bisphenol-A-glycidylmethacrylate (Bis-GMA) and triethyleneglycol dimethacrylate (TEGDMA), into acetone, ethanol or methanol. After an etching and rinsing procedure, the adhesives were applied onto either wet dentin surfaces (wet bonding) or dentin surfaces primed with the same solvent (solvent-primed bonding). Microtensile bond strength (MTBS) was measured at 48 hrs, 1 month and after 10,000 times of thermocycles. The bonded interfaces were evaluated using a scanning electron microscope (SEM). Regardless of bonding protocols, well-developed hybrid layers were observed at the bonded interface in most specimens. The highest mean MTBS was observed in the adhesive containing ethanol at 48 hrs. With solvent-primed bonding, increased MTBS tendencies were seen with thermo cycling in the adhesives containing ethanol or methanol. However, in the case of wet bonding, no increase in MTBS was observed with aging.

• Proceedings of the Korean Environmental Health Society Conference
• /
• 2004.06a
• /
• pp.185-187
• /
• 2004

The co-administration of BPA and BBP induced slow weight gain compared with single administration in dams. Also, such mixture induced low neonatal body weights in next generation. The dams treated with BPA and BBP showed significant organ weight changes in liver, spleen exposed during lactational periods. But the dams exposed during lactational periods showed significant organ weight changes not only in liver, spleen but also in kidney, uterus and ovary. The F1 female rats exposed during lactation periods showed significant organ weight changes in liver, spleen, ovary. The F1 male rats showed significant organ weight changes in liver, kidney, epididymis, vesicular glands, prostate. However no clear synergistic effects of BPA and BBP could be found. Estrogen receptor ${\alpha}$ expression by BPA and BBP in the uterus(dam, F1 female) and testis(F1 male) were studied. There was no significant different $ER{\alpha}$ expression pattern between control and treated groups. But $ER{\alpha}$ expression were increased in F1 male testis and female uterus. F1 male showed distinct $ER{\alpha}$ expression, especially in the group of lactational combined exposure. Synergistic $ER{\alpha}$ expression was found by combined treatment of BPA and BBP.

• Composites Research
• /
• v.18 no.4
• /
• pp.14-20
• /
• 2005

To determine the effect of chemical structure of aromatic amino curing agents on thermal and mechanical properties, standard epoxy resin DGEBF (diglycidylether of bisphenol F) was cured with diaminodiphenyl methane (DDM) and diaminodiphenyl sulphone (DDS) in a stoichiometrically equivalent ratio. From this work the effect of aromatic amino curing agents on the thermal and mechanical properties is significantly influenced by the chemical structure of curing agents. In contrast, the results show that the DGEBF/DDS system having the sulfone structure between the benzene rings had higher values in the thermal stability, density, shrinkage ($\%$), thermal expansion coefficient, tensile modulus and strength, flexural modulus and strength than the DGEBF/DDM system having methylene structure between the benzene rings, whereas the DGEBF/DDS system presented low values in maximum exothermic temperature, conversion of epoxide, and grass transition temperature. These results are caused by the relative effects of sulfone group having strong electronegativity and methylene group having (+) repulsive property. The result of fractography shows that the grain distribution of DGEBF/DDS system is more irregular than that of the DGEBF/DDM system.

• Applied Chemistry for Engineering
• /
• v.7 no.5
• /
• pp.963-969
• /
• 1996

Cure characteristics of DGEBA(diglycidyl ether of bisphenol A)/dicy(dicyandiamide) system containing diuron(3-(3,4-dichloro phenyl) -1,1-dimethylurea) as an accelerator was investigated. The system has shelf life of six months because dicy is insoluble in liquid/solid resins at room temperature. It is generally known that dicy is an adequate curing agent for one component adhesive due to its highly latent property. With increasing the amount of added dicy, reaction heat of DGEBA/dicy system increased and degree of conversion was not varied. For DGEBA/dicy/diuron system, cure temperature decreased about $40^{\circ}C$ and cure reaction became fast by the addition of diuron which activates dicy. $T_g$ of the mixed resin decreased with the amount of accelerator. which was interpreated with molecular structure forming loose chain. Cure kinetics of DGEBA/dicy and DGEBA/dicy/diuron system were explained using Kamal's autocatalytic reaction model. The effect of acceleration was confirmed with that reaction model.

• Applied Chemistry for Engineering
• /
• v.5 no.1
• /
• pp.54-62
• /
• 1994

Bisphenol A polycarbonate(PC) and polyethylene terephthalate(PET) was blended with methylmethacrylate-butadiene-styrene(MBS) copolymer for the improvement of impact resistance strength PC/PET alloy blending with PC more than 15 parts to 100 parts of PET usually have poor compatability, but increased the compatability characteristics of PC/PET alloy prepared by addition of MBS compatabilizer. The compatability of PC and PET using compatabilizer, MBS was determined by measuring the thermal characteristics of Tg difference between PC and PET, and crystallization temperature, Tcc. As the Tg difference becoming narrow to $60^{\circ}C$, and Tcc decreasing to $150^{\circ}C$, the comparability of PC and PET was increased. And also tough rate impact strength to PC/PET alloy using MBS was increased, in case more than 15 parts of PC being blended to PET.

• Proceedings of the Korean Society of Developmental Biology Conference
• /
• 2001.02a
• /
• pp.14-18
• /
• 2001

현대의 우리들의 생활환경 중에는 약 10만 종류 이상의 아주 많은 화학물질이 존재하고 있으며 매년 약 1000종류의 새로운 화합물이 상품화되고 있다고 알려져 있다. 이들 중 일부는 우리의 일상생활에 편리한 기능을 가져다 주는 역할을 하고 있으나 최근 생태계 및 인체에 유해한 영향을 미치는 물질로 판명되는 사례가 증가하고 있다. 그들 중에는, 성호르몬과 유사한 구조를 가지기 때문에 호르몬 수용체에 잘못 결합하여 호르몬 활성을 異常히 높이는 등의 영향을 미치는 것이 알려져 있으며, 또, 약물대사 효소의 유도나 효소활성의 저해 등에 의한 물질대사의 교란, 면역계통의 저해, 발암작용 등의 영향에도 미치는 것이 알려져 있다. 이러한 일군의 물질은 내분비계 장애물질(Endocrine disruptors; 환경 호르몬)로 불리며, 최근의 여성에 있어서 유방암의 발생율의 상승이나 남성의 정자수의 감소, 혹은 어떤 종의 야생 생물에 있어서 생식기능 장해(악어 수컷 생식기의 퇴화, 수컷 잉어등의 암컷화, 일부 권패류의 임포섹스 등)는 이러한 내분비계 장애물질에 의하여 유발되고 있다고 하는 가능성이 지적되고 있다. 그렇지만, 이러한 내분비계 장애물질의 환경 중에서의 분포나 다양한 생물에의 영향에 관한 연구는 세계적으로도 아직 부족하고 내분비계 장애물질의 실태나 그 메카니즘 및 그것이 가지는 의미에 대하여는 아직 명확하게 규명되어 있지 않고 있어, 그것에 의한 생체영향의 평가를 총합적으로 검토하기까지에는 이르지 않고 있다. 이러한 물질에 관한 연구는 최근 선진국을 중심으로 활발한 연구가 수행되고 있으나, 우리 나라에 있어서의 연구는 지금까지는 아직 미미한 수준에 머물고 있다. 따라서, 이러한 내분비계 장애물질을 빠른 시기에 발견하여 그것들에 의한 영향을 평가하고, 그 영향을 미연에 방지하는 데에 필요한 대책을 강구하기 위한 많은 연구가 필요 불가결하다. 본고에서는 이러한 환경호르몬 물질 중 본 연구실에서 수행한 내용을 중심으로 유해화학물질 오염 및 대책에 대하여 간단히 발표하고자 한다. 발표내용은, 남해안을 중심으로 조사한 유기주석화합물 오염, 광양만에서의 PAHs(다환방향족탄화수소류) 및 Bisphenol A 오염에 관한 연구결과와 이러한 유해화학물질 오염을 평가하고 관리하는 하나의 유용한 방법으로서 위해성 평가에 대하여 실례를 중심으로 간단히 소개하고자 한다.