• 제목/요약/키워드: Bishop stress

검색결과 13건 처리시간 0.022초

Bishop 응력에 의거한 불포화토의 응력-변형률 관계의 분석 (An Analysis of Stress-Strain Relationships of Unsaturated soils Based on Bishop Stress)

  • 오세붕;이종필;김태경;권오균
    • 대한토목학회논문집
    • /
    • 제29권4C호
    • /
    • pp.175-182
    • /
    • 2009
  • 본 연구에서는 불포화토의 삼축시험시 응력-변형률 관계를 Bishop 응력으로 기술하여 분석하였다. 불포화토의 파괴포락선은 Bishop 응력으로 기술할 경우에 모관흡수력에 무관하게 유일한 관계를 나타내고 있었다. 특히 모관흡수력이 낮은 경우에는 선형적인 관계를 나타내며 실험치와 이론치가 잘 일치하고 있었다. 미소변형률 영역에서의 변형계수는 대체로 Bishop 응력에 따라 선형적으로 증가하는 추세를 보이고 있었다.

낮은 모관흡수력 수준에서 불포화토의 Bishop 응력에 관한 연구 (On the Bishop Stress of Unsaturated Soils under the Low Level of Matric Suction)

  • 오세붕;김태경
    • 한국지반공학회논문집
    • /
    • 제24권7호
    • /
    • pp.17-24
    • /
    • 2008
  • 본 연구에서는 불포화토의 삼축시험시 거동을 Bishop 응력으로 기술하여 분석하였다. Bishop 응력으로 기술한 $K_0$ 압축시 경로 및 최종값은 모관흡수력에 무관하게 유일한 관계로 나타나고 있음을 알 수 있었다. 불포화토의 파괴포락선은 Bishop 응력으로 기술할 경우에 모관흡수력에 무관하게 유일한 관계를 나타내고 있었다. 특히 모관흡수력이 낮은 경우에는 선형적인 관계를 나타내며 실험치와 이론치가 잘 일치하고 있었다. 그리고 Bishop 응력을 기술하는 변수 ${\chi}$는 이론적으로 일정한 값을 가지고 있음을 입증하였다. 파괴규준에서 축차응력이 0인 경우 정의되는 흡수응력은 모관흡수력에 대하여 선형적으로 증가하며 실험치와 이론치가 적절하게 일치하였다.

사면의 안정해석에 관한 연구 (Stability Analysis of the Slopes)

  • 강우욱;조성섭;지인택
    • 한국농공학회지
    • /
    • 제31권1호
    • /
    • pp.58-70
    • /
    • 1989
  • The paper compared the Bishop methed to the Fellenius method in the analysis of slope stability. Laboratory model test was carried out in the case of seepage flow considered. The results obtained from this study were summarized as follows; 1. The slice pieces of 10 were enough to analysis the slope stability. 2. The safety factor. by the Fellenius method was lower than the Bishop method by the 96 to 97% in the case of no seepage flow and by the 95 to 96% in the case of seepage flow considered. 3. Besides the parameter of soil and slope, the safety factor of slope was influenced by the height of slope. This phenomena was distinct in the height of height less than 10 meters. 4. In the case of clay, there was no difference in the safety factor of slope between Fellenius and Bishop rnethod. The safety factors of slope with the seepage flow considered were lower than those with no see-page flow. 5. The influence of cohesion on the safety factor was more significant in the Bishop method than in the Fellenius method. 6. The slope failure of model test of A and B soil samples with high permeability coefficient was taken place slightly in vicinity of toe by the concentration of stress and gradually increased 7. Under condition of same slope height, the shapper the slope, the shorter the radius and the center of critical circle appered downward and finally failure of slope occured inside the slope.

  • PDF

유효응력에 근거한 불포화토의 역학적 구성모델 (Constitutive Model for Unsaturated Soils Based on the Effective Stress)

  • 신호성
    • 한국지반공학회논문집
    • /
    • 제27권11호
    • /
    • pp.55-69
    • /
    • 2011
  • 다양한 지반공학적 문제들에서 불포화 상태의 중요성이 강조되면서, 불포화 지반의 열-수리-역학적 현상들에 대한 거동특성을 모사하기 위한 역학적 구성모델 개발이 진행되고 있다. 본 연구에서는 Bishop의 유효응력 정의에 근거한 불포화 지반의 역학적 탄소성 구성모델을 제시하였다. 유효응력에 근거한 구성관계는 유효응력과 온도를 주 변수로 증분 형식으로 표현되었으며, 이를 이용하여 응력 갱신과 강성 텐서를 산정하였다. 개발된 구성모델을 이용하여 THM 현상을 포함하는 불포화토의 1차원 거동, 불포화토의 삼축 압축시험, 그리고 고준위 방사성폐기물 시설의 완충재의 거동 특성에 관한 예제 해석을 수행하여 해의 안정성과 구성모델의 적용성에 대하여 논의하였다. 수치해석결과는 개발된 역학적 구성모델이 THM 현상의 매우 복잡한 거동을 효과적으로 모사할 수 있었으며, 일반적인 불포화토의 거동 해석뿐만 아니라 다양한 환경 조건하에서의 THM 거동 해석에 적용이 가능할 것으로 판단된다.

굴패각 혼합토의 비배수 전단강도 특성 (The Undrained Shear Strength Characteristics of Mixed Soil with Oyster Shells)

  • 송영진;김기영;문홍득
    • 한국지반공학회논문집
    • /
    • 제19권6호
    • /
    • pp.7-14
    • /
    • 2003
  • 본 연구에서는 굴패각 혼합토의 전단강도 특성을 파악하고자 해성토에 굴패각 혼합율 0%, 25% 그리고 50%로 달리 한 후 $K_o$ 비배수 삼축압축 실험을 실시하였다. 또한 각 혼합비에 따라 유효 연직압을 200kPa, 300kPa 그리고 400kPa로 적용하였고, 유효 연직압 300kPa에 대해서 전단속도를 세가지로 달리하여 그에 따른 혼합토의 전단강도 특성을 알아보았다. 일련의 실험결과로부터 굴패각 혼합비가 증가할수록 굴패각 입자의 파쇄로 인해 전단강도가 증가함을 볼 수 있었으며, 전단속도는 굴패각 혼합토의 전단강도에 큰 영향을 미치지 못함을 확인하였다. 굴패각 혼합토의 실내실험과 Mayne, Bishop의 경험식을 토대로 비교 분석한 결과 비배수 전단강도는 실험값과 비슷한 경향을 나타내고 있다. 그러나 간극수압계수 예측은 혼합비 0%에서 경험식이 실험값과 보다 과대 평가를 보이고 있다.

불포화토의 등방압축 삼축시험시 변형계수에 관한 연구 (Isotropic Compression Triaxial Test of Deformation Modulus of Unsaturated soils)

  • 이종필;오세붕;김태경
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2009년도 춘계 학술발표회
    • /
    • pp.132-135
    • /
    • 2009
  • In order study, experimental stress-strain relationships were achieved for various suctions by triaxial tests. A failure envelop was occurred on a plane in p-q-$\psi$ space, since the level of matric suction is in the small range. It was found that the failure criteria could be defined uniquely by the Bishop stress and were also independent of matric suctions. At the level of small strain, deformation moduli were evaluated according to matric suctions by fitting to Ramberg-Osgood model. It was found that deformation moduli increase as matric suctions increase.

  • PDF

Bearing capacity of strip footings on unsaturated soils under combined loading using LEM

  • Afsharpour, Siavash;Payan, Meghdad;Chenari, Reza Jamshidi;Ahmadi, Hadi;Fathipour, Hessam
    • Geomechanics and Engineering
    • /
    • 제31권2호
    • /
    • pp.223-235
    • /
    • 2022
  • Bearing capacity of shallow foundations is often determined for either dry or saturated soils. In some occasions, foundations may be subjected to external loading which is inclined and/or eccentric. In this study, the ultimate bearing capacity of shallow foundations resting on partially saturated coarse-grained cohesionless and fine-grained cohesive soils subjected to a wide range of combined vertical (V) - horizontal (H) - moment (M) loadings is rigorously evaluated using the well-established limit equilibrium method. The unified effective stress approach as well as the suction stress concept is effectively adopted so as to simulate the behaviour of the underlying unsaturated soil medium. In order to obtain the bearing capacity, four equilibrium equations are solved by adopting Coulomb failure mechanism and Bishop effective stress concept and also considering a linear variation of the induced matric suction beneath the foundation. The general failure loci of the shallow foundations resting on unsaturated soils at different hydraulic conditions are presented in V - H - M spaces. The results indicate that the matric suction has a marked influence on the bearing capacity of shallow foundations. In addition, the effect of induced suction on the ultimate bearing capacity of obliquely-loaded foundations is more pronounced than that of the eccentrically-loaded footings.

사면안정 해석과 댐 거동분석을 통한 Carsington Dam 파괴의 고찰 (Assessment of Carsington Dam Failure by Slope Stability and Dam Behavior Analyses)

  • 송정락;김성인
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 1991년도 추계학술발표회 논문집 지반공학에서의 컴퓨터 활용 COMPUTER UTILIZATION IN GEOTECHNICAL ENGINEERING
    • /
    • pp.87-102
    • /
    • 1991
  • 영국 잉글랜드 지방의 Carsington Dam의 파괴원인은 설계시 발견되지 못한 댐 상류 사면 하부의 황색점토층의 존재와 이미 존재하던 전단변형에 기인한 것으로 보고되었다. 설계시 황색 점토층과 이미 존재하던 전단변형을 고려하지 않고 전통적인 원호파괴 양상으로 검토된 사면의 안전율은 1.4 이상으로 나타났다. 그러나 댐 파괴후 황색 점토층과 이미 존재하던 전단변형을 고려한 사면의 안전율은 약 1.0으로 보고되었다. 또한 파괴후 사면에 대한 유한 요소 해석결과로 부터 파괴 토괴의 절편에 작용하는 수평력은 수평에 대해서 약 10。아래로 작용하고 있음이 보고되었다. 본 고에서는 Bishop의 간편법과 Janbu 방법 및 Morgenstern-Price 방법을 이용하여 원호형 사면파괴양상과 특정 파괴면을 따라서 일어나는 쐐기형 파괴양상에 대하여 사면안정을 검토하였으며, 이미 존재하던 전단변형과 이에 따른 토괴의 연속적인 거동은 이미 주어진 지반 특성을 이용한 강도정수와 간극수압비에 의하여 고려하였다. 그 결과 확생 점토층을 무시하고 원호형 파괴 양상에 대하여 Bishop의 간편법에 의한 설계 시점에서의 안전율은 1.387로 나타났으며(STABL), 파괴 후의 지반자료를 이용하고, 황색점토층을 고려한 안전율을 Janbu 방법의 경우 1.012(STABL), 그리고 Morgenstern-Price 방법의 경우 0.969을 보여주었다(MALE). 또한 Cam-Clay Model을 이용한 유한 요소 해석용 프로그램을 이용하여 댐 제체의 거동을 검토하였다. 이때 댐 제체의 성토 작업 및 압밀진행에 따른 간극수압변화와, 파괴시 혹은 파괴에 임박한 상태에서의 제체의 거동은 적절하게 가정된 지반의 응력-변형률 관계와 간극수압특성에 의하여 고려되었다. 그 결과 응력 및 변위가 심하게 발생하는 지역은 황색 점토층이었으며 이로부터 황색 점토층에서 부터 파괴면이 생성되어 다른 지역으로 전파되었음을 유추할 수 있었다.form trap with 2.88[eV] deep of injected space charge from the chathode in the crystaline regions. The origin of ${\alpha}$$_2$ peak was regarded as the detrapping process of ions trapped with 0.9[eV] deep originated from impurity-ion remained in the specimen during production process of the material, in the crystalline regions. The origin of ${\beta}$ peak was concluded to be due to the depolarization process of "C=0"dipole with the activation energy of 0.75[eV] in the amorphous regions. The origin of ${\gamma}$ peak was responsible to the process combined with the depolarization of "CH$_3$", chain segment, with the activation energy of carriers from the shallow trap with 0.4[eV], in he amorphous regions.의 증발산율은 우기의 기상자료를 이용하여 구한 결과 0.05 - 0.10 mm/hr 의 범위로서 이로 인한 강우손실량은 큰 의미가 없음을 알았다.재발이 나타난 3례의 환자를 제외한 9례 (75%)에서는 현재까지 재발소견을 보이지 않고 있다. 이러한 결과는 다른 보고자들과 유사한 결과를 보이고 있지만 아직까지 증례가 많지 않기 때문에 생존율을 얻기에는 미흡

  • PDF

특정사례사면 해석 결과 및 평가

  • 백규호;오세붕;이승래
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 1991년도 추계학술발표회 논문집 지반공학에서의 컴퓨터 활용 COMPUTER UTILIZATION IN GEOTECHNICAL ENGINEERING
    • /
    • pp.25-33
    • /
    • 1991
  • The slope stability analysis of Carsington dam is performed, considering the effects of pore water pressure, slip surface configuration, lateral stress and various shear strengths. Without yellow clay layer, the Bowles' and STABR programs were used to find the circular slip surface which has the maximum safety factor. At last using the Morgenstern-Price method, the effects of rainfall and strength of yellow clay were mainly considered in the back analyses after failure. It was found that (1) the potential slip was not predicted in the analysis based on the modified Bishop method without considering the yellow clay layer, and (2) the crllapse of dam had been occurred according to the critical shear strength of the yellow clay and pore water pressure increase.

  • PDF

Axial frequency analysis of axially functionally graded Love-Bishop nanorods using surface elasticity theory

  • Nazemnezhad, Reza;Shokrollahi, Hassan
    • Steel and Composite Structures
    • /
    • 제42권5호
    • /
    • pp.699-710
    • /
    • 2022
  • This work presents a comprehensive study on the surface energy effect on the axial frequency analyses of AFGM nanorods in cylindrical coordinates. The AFGM nanorods are considered to be thin, relatively thick, and thick. In thin nanorods, effects of the inertia of lateral motions and the shear stiffness are ignored; in relatively thick nanorods, only the first one is considered; and in thick nanorods, both of them are considered in the kinetic energy and the strain energy of the nanorod, respectively. The surface elasticity theory which includes three surface parameters called surface density, surface stress, and surface Lame constants, is implemented to consider the size effect. The power-law form is considered for variation of the material properties through the axial direction. Hamilton's principle is used to derive the governing equations and boundary conditions. Due to considering the surface stress, the governing equation and boundary condition become inhomogeneous. After homogenization of them using an appropriate change of variable, axial natural frequencies are calculated implementing harmonic differential quadrature (HDQ) method. Comprehensive results including effects of geometric parameters and various material properties are presented for a wide range of boundary condition types. It is believed that this study is a comprehensive one that can help posterities for design and manufacturing of nano-electro-mechanical systems.