• 대한치과보철학회지
• /
• 제48권4호
• /
• pp.251-258
• /
• 2010

연구 목적: 이 연구의 목적은 표면처리방법이 지르코니아와 네 종류의 시멘트의 전단결합 강도에 미치는 영향을 평가하는 것이다. 연구 재료 및 방법: 총 120개의 디스크 모양의 산화 지르코늄 (3Y-TZP, Kyoritsu, Tokyo, Japan) 시편을 다음과 같이 표면처리 하였다: (1) $110\;{\mu}m$ 산화 알루미나 분사처리 (2) Silica coating ($Rocatec^{TM}$ 3M ESPE)를 이용한 표면처리 (3) 처리하지 않음. 각각의 표면 처리 후, 2종의 자가 접착형 시멘트 (RelyX Unicem, Maxcem)와 레진 강화 글라스 아이오노머 시멘트 (RelyX Luting), Bis-GMA 레진 시멘트 (Nexus3)를 시편에 부착하였으며 각 군은 UTM을 이용하여 전단결합강도를 측정하였다. 표면처리, 시멘트의 종류에 따른 결합강도의 차이를 살펴보기 위하여 일원변량분석 (One-way ANOVA)과 이원변량분석 (two-way ANOVA)을 이용하고 사후 분석으로 Tukey HSD test를 실시하였다. 결과: 로카텍 처리 후, RelyX Unicem을 부착한 군이 가장 높은 결합 강도를 보였으며 (P<.05) 알루미나 분사처리를 한 군과 로카텍 처리를 한 군은 아무런 처리를 하지 않은 군보다 유의하게 높은 결합 강도를 보였다 (P<.05). 또한 모든 표면상태에서 RelyX Luting은 다른 군에 비해 통계적으로 유의하게 가장 낮은 결합강도를 보였다 (P<.05). 결론: 본 연구의 결과에 따르면 RelyX Unicem은 지르코니아와 강한 결합력을 보였으며 로카텍 처리는 결합을 증진시키는데 효과적이었다.

• Restorative Dentistry and Endodontics
• /
• 제23권2호
• /
• pp.701-709
• /
• 1998

Many dental composites are Bis-GMA based resin which diluted with the more fluid monomer triethylenglycol dimethacrylate(TEGDMA). TEGDMA is often present in exess so that some quantity remains unreacted following photo-initiated polymerization. TEGDMA is a component of some resin composites which contributes to their cytotoxicity. The presence of dentin between resin composite and pulp space reduce the cytotoxicity in vitro. The root system from extrcted human third molar was removed and then a circular occlusal cavity 4mm in diameter was prepared, leaving a remaining dentinal thickness to the roof of the pulpal chamber within the range 1.0-1.5mm. Dentine was treated with 37% phosphoric acid prior to Z 100 placement without using bonding resin(group 1). In group 2, SMP(Scotchbond Multi Purpose) primer, bonding resin prior to Z 100 placement were applied sequently. In group 3, moulds with internal dimensions 4mm diameter by 2mm depth were used to contain the composite alone with an equvalent mass on tooth model, and then they were immersed directly into water. The purpose of this study is to evaluate the release rate and quantity of TEGDMA with or without the application of bonding resin. Both release rate and total cumulative amount of TEGDMA for the three groups were determined using reversed-phase HPLC at times up to 10 days. The results were as follows: 1. All experimental groups showed the highest rate of release was in the first sample period(0-4.32 min) and the rate of release declined exponentially thereafter. 2. The maximum release rate and total cumulative account of TEGDMA in the tooth model of group 1 and group 2 with the use of SMP bonding resin were reduced however ther were no significant differences between these groups(P>0.05). 3. In the first sample period(0-4.32 min), the rate of release of TEGDMA from composite resin in group 3 immersed directly into water was significantly higher than that in group 1 and group 2 of tooth model(P<0.05). Conclusively, TEGDMA diffusion from Z 100 resin was not effectively prevented by the presence of dentin in spite of using the SMP bonding resin.

• Restorative Dentistry and Endodontics
• /
• 제25권3호
• /
• pp.421-434
• /
• 2000

The purpose of this study was to evaluate the influences of incorporation of zirconium-silicate on diametral tensile strength, shear bond strength to the enamel, and depth of cure of 7 experimental composites. One group contained no filler(group 1 or control group), and the other 6 composites contain 75% filler in which zirconium-silicate(Zr-Si) were 0%, 2%, 4%, 6%, 8%, 10% with reduced contents of silica filler, respectively. Both of fillers were treated with 1% silane (${\gamma}$-methacryloxypropyltrimethoxy silane). Light curable monomers were prepared by mixing Bis-GMA and TEGDMA with 3:1 ratio and adding camphoroquinone(CQ) 0.6% with tertiary amine 0.3%. Diametral tensile strengths of specimens with $3mm{\times}6mm$ were measured with Instron (No.4467, USA) with 1mm/min crosshead speed. Shear bond strengths of composites which bonded to bovine enamel etched with 37% phosphoric acid were measured at Instron Testing Machine with as same speed as in diametral tensile strengths. Depth of cure were measured by a method that composite was filled in cylinder mold, illuminated at one side. and uncured composite was removed with acetone, and the residual thickness of composite was measured. Following results were obtained ; 1. Composites containing 0%, 2%, or 4% zirconium-silicate filler(group 2, 3 and 4) showed the statistically higher diametral tensile strength than the others. (p<0.05) 2. Increase of zirconium-silicate filler contents reduced the diametral tensile strength of experimental composites. ($r^2$=0.8721, p=0.0002) 3. Increase of zirconium-silicate filler contents did not affect the shear bond strength of experimental composites. ($r^2$=0.2815, p=0.4067) 4. Increase of zirconium-silicate filler contents reduced significantly the depth of cure of experimental composites. ($r^2$=0.9700, p<0.0001) These results mean that the mechanical properties of composites could not be improved by incorporation of small amount of zirconium-silicate filler. Also, the increased contents of zirconium-silicates fillers was found to reduce the diametral tensile strength and depth of cure.

• 대한치과보철학회지
• /
• 제45권6호
• /
• pp.743-752
• /
• 2007

Statement of problem. The aims of the study were to evaluate the effect of current surface conditioning methods on the bond strength of a resin composite luting cement bonded to ceramic surfaces and to identify the optimum cement type. Material and methods. The sixty zirconia ceramic specimens(10 per group) with EVEREST milling machine and 60 tooth block were made. The zirconia ceramic surface was divided into two groups according to surface treatment: (1) airborne abrasion with $110{\mu}m$ aluminum oxide particles; (2) Rocatec system, tribochemical silica coating. The zirconia ceramic specimens were cemented to tooth block using resin cements. The tested resin cements were Rely X ARC, Panavia F and Superbond C&B. Each specimen was mount in a jig of the universal testing machine for shear strength. The results were subjected to 2-way ANOVA and Post hoc tests was performed using Tukey, Scheffe, and Bonferroni test. Results. The mean value of shear bond strength(MPa) were as follows: $$RelyXARC(+Al_2O_3),5.35{\pm}1.69$$; $$RelyXARC(+Rocatec),8.50{\pm}2.13$$; $$PanaviaF(+Al_2O_3),9.58{\pm}1.13$$; $$PanaviaF(+Rocatec),12.98{\pm}1.71$$; $$SuperbondC&B(+Al_2O_3)8.27{\pm}2.04$$; $$SuperbondC&B(+Rocatec),14.46{\pm}2.39$$. There was a significant increase in the shear bond strength when the ceramic surface was subjected to the tribochemical treatment(Rocatec 3M) in all cement groups(P<0.05). Bonding strengths of cements applied to samples treated with $Al_2O_3$ were compared; Rely X ARC showed the lowest values, whereas Panavia F cement showed higher value than that of Superbond C&B group with no statistical significance. When the bond strength of cements with of Rocatec treatment was compared, Rely X ARC showed lowest values. Overall, it was apparent that tribochemical treated Super-Bond possessed higher mean bond strength (14.46MPa; P<0.05) than that of Panavia F cement group with no significance. Conclusions. Silica coating followed silanization(Rocatec treatment) increase the bond strength between resin cement and zirconia ceramic. Panavia F containing phosphate monomer and Superbond C&B comprised of 4-META tend to bond chemically with zirconia ceramic, thus demonstrating higher bond strength compared to BisGMA resin cement. Superbond C&B has shown to have highest value of bonding strength to zirconia ceramic after Rocatec treatment compared to other cement.

• 구강회복응용과학지
• /
• 제18권4호
• /
• pp.289-299
• /
• 2002

The bond strength is one of the most important factor in establishing long-term success of esthetic restorative dentistry. So, various restorative materials have been introduced to improve the esthetic and physical properties. Ormocer (organically modified ceramic) was developed as a result of such efforts. This study was performed to compare the shear bond strength of ormocer based adhesive with that of existing dentin adhesive. In this study $Admira^{(R)}$ and $Admira^{(R)}$ bond of the ormocer system are grouped together for ADM, Single $Bond^{(R)}$ which is an one-bottle adhesive and Z-250TM which is hybrid composite resin of BIS-GMA system for SIN, and $Definite^{(R)}$ of ormocer and Etch & $Prime^{(R)}$ 3.0 which is a self etching priming/ bonding agent for ETC. The results of this study were as follows. : (1) In the comparison of shear bond strength according to different adhesive system, shear bond strength was increased in the order of ETC group, SIN group, ADM group. There was no significant difference between ADM group and SIN group. However, there was a significant level of difference between ADM and ETC groups as well as SIN and ETC groups( p<0.05). (2) Examination by a scanning electron microscope showed a well established hybrid layer and resin tag in both ADM group and SIN group, while ETC group showed a minimal formation of the hybrid layer when compared with ADM and SIN groups. From the above results, it may be reasonable to start the clinical application of ormocer system, and it is recommended that ormocer system should be used along with an ormocer based adhesive because ormocer system showed the lower shear bond strength when it used with other existing self etching priming/bonding agent. The self etching priming/bonding agent showed relatively low shear bond strength, and it is considered that the further study should be needed.

• Restorative Dentistry and Endodontics
• /
• 제29권6호
• /
• pp.520-531
• /
• 2004

The aim of this study was to investigate the effect of monomer and filler compositions on the rheological properties related to the handling characteristics of resin composites. Methods. Resin matrices that Bis-GMA as base monomer was blended with TEGDMA as diluent at various ratio were mixed with the Barium glass (0.7 um and 1.0 um), 0.04 um fumed silica and 0.5 um round silica. All used fillers were silane treated. In order to vary the viscosity of experimental composites, the type and content of incorporated fillers were changed, Using a rheometer, a steady shear test and a dynamic oscillatory shear test were used to evaluate the viscosity ($\eta$) of resin matrix, and the storage shear modulus (G'), the loss shear modulus (G"), the loss tangent ($tan{\delta}$) and the complex viscosity (${\eta}^*$) ofthe composites as a function of frequency ${\omega}{\;}={\;}0.1-100{\;}rad/s$. To investigate the effect of temperature on the viscosity of composites, a temperature sweep test was also undertaken. Results. Resin matrices were Newtonian fluid regardless of diluent concentration and all experimental composites exhibited pseudoplastic behavior with increasing shear rate. The viscosity of composites was exponentially increased with increasing filler volume%. In the same filler volume, the smaller the fillers were used, the higher the viscosities were. The effect of filler size on the viscosity was increased with increasing filler content. Increasing filler content reduced $tan{\delta}$ by increasing the G' further than the G". The viscosity of composites was decreased exponentially with increasing temperature.

• Restorative Dentistry and Endodontics
• /
• 제23권1호
• /
• pp.1-19
• /
• 1998

After polymerizing composite resin with argon laser and visible light, four test, to be concretely, measurement of compressive strength using Instron testing machine, surface microhardness using Rockwell hardness tester, quantitative analysis of residual monomer using HPLC and analysis of degree of conversion using FTIR, were accomplished. Test groups were a sort of specimen with 3mm diameter, 4mm thickness for measuring compressive strength, two sort of specimen with 7mm diameter, 2mm and 3mm thickness for measuring surface microhardness, quantitative analysing of residual monomer after curing and measuring the degree of conversion, each were divided by six groups according to the condition of light exposure. In case of argon laser, in 1.0W and 0.5W output, the exposure time for specimen were 5 sec, 10 sec respectiyely. In case of visible light, the exposure time for specimen were 20 sec, 40 sec respectively. The test were accomplished and following results were obtained. 1. Compressive strength of composite resin was the highest in the group of 1 W output, exposing for 10 sec with argon laser, followed by the group of 0.5W, exposing for 10 sec with argon laser, the group of exposing for 40 sec with visible light. But there were statistically no significant difference between these three groups(p>0.05). 2. Surface microhardness of composite resin wasn't significantly affected by light curing conditions. 3. BIS-GMA within residual monomer was least detected in the group of exposing for 40 sec. TEGDMA was least detected in the group of 1 W output, exposing for 10 sec with argon laseboth 2mm and 3mm thickness specimen. 4. The degree of conversion of all groups in the 2mm thickness specimen were more than 50%, similar to each other but in the group of 1W, exposing 10 sec with argon laser the degree of conversion was highest in the 3mm thickness specimen. 5. Argon laser could make composite resin to has similar properties with 25% lesser exposure time than visible light.

• 치위생과학회지
• /
• 제18권6호
• /
• pp.367-373
• /
• 2018

시판 중인 어린이 음료가 레진계 치면열구전색제에 미치는 물리 화학적 영향을 알아보기 위해 판매량이 높은 3종의 어린이 음료와 대조군으로 생수를 선정하였다. 제조사의 지시에 따라 레진 시편을 제작하여 시편의 초기 거칠기 값(Ra)를 측정하였고, 각 음료의 pH를 측정한 후, 레진 시편을 각각의 음료에 침지시켜 $37^{\circ}C$ 배양기에서 72시간 보관하였다. 72시간 후 레진 시편의 표면 거칠기를 측정하였고 시편 표면의 형태변화 관찰을 위해 주사전자현미경으로 관찰하였다. 레진 시편에서 용출된 단량체의 종류 및 용출량은 HPLC를 이용하여 비교 분석하였다. 생수를 제외한 모든 실험음료에 구연산이 첨가되어 있었고 어린이 음료의 평균 pH는 $3.25{\pm}0.17$로 '아이키커'에서 $3.03{\pm}0.01$로 가장 낮았고 '뽀로로'에서 $3.47{\pm}0.02$로 가장 높았다. 어린이 음료에 침지 후 시간 경과에 따른 표면 거칠기가 증가하였고 레진 시편의 표면에 기질의 탈락을 관찰하였다. 모든 실험음료에서 bis-GMA는 유출되지 않았으나 생수를 제외한 어린이 음료에서는 TEGDMA가 유출되었다. 이상의 결과 어린이 음료는 치면열구전색제의 열화와 단량체의 유리를 촉진할 수 있으며 유리된 단량체는 성장 중인 어린이에게 더 큰 영향을 미칠 수 있으므로 어린이 음료를 빈번히 음용하는 것은 주의가 필요하다.

• Restorative Dentistry and Endodontics
• /
• 제34권4호
• /
• pp.333-339
• /
• 2009

현행 복합레진에서 가장 많이 사용되고 있는 광중합개시제의 일종인 camphoroquinone은 중합 효과가 적고 황색을 띠기 때문에 다른 개시제에 대한 연구가 이루어져 왔다. 이에 본 연구에서는 새로운 개시제인 OPPI (p-octyloxy-phenyl-phenyl iodonium hexafluoroantimonate)를 기존의 camphoroquinone, amine과 다양한 비율로 혼합한 다음, barium glass를 첨가한 실험용 복합레진을 제조하여 각 수복재의 미세누출도를 비교, 평가하였다. 총 4종의 단량체를 제조하였으며 camphoroquinone, OPPI, amine의 조성 중량비는 다음과 같다: A군 - 0.5%, 0%, 1% / B군 - 2%, 0.2%, 2% / C군 - 0.2%, 1%, 0.2% / D군 - 1%, 1%, 2%. 이후 평균 입자 크기 1 ${\mu}m$의 3.2% silane 처리된 barium glass를 중량비 78%로 섞어 복합레진을 제조하였다. 총 55개의 소구치에 치경부를 중심으로 원형 와동을 (직경; 근원심 폭경의 2/3, 깊이; 1.5 mm) 형성한 다음, 자가부식형 접착시스템인 Hybrid Bond로 처리하고 4종의 복합레진으로 수복하였다. 연마 후 치아를 섭씨 5도와 55도에서 각기 30초씩 담궈 500회의 열순환 처리하였으며 전기화학적 방법으로 전기 전도성을 2회 (열순환 처리 후, 1주 간격으로 식염수를 교환하며 3개월 보관 후) 측정, 비교하였다. 미세누출도는 시간 경과에 따라 커지는 양상을 보였으며, 열순환 처리 직후 4종 복합레진 사이에 차이를 보이지 않았지만, 3개월 보관 후에는 D군이 가장 적었으며 C군이 가장 큰 미세누출을 보였다. 열순환 자극 직후 차이를 보이지 않았지만, 3개월 보관 후 측정치로 미루어 볼 때, OPPI와 전반적인 중합시스템이 고농도로 함유된 복합레진(D군)과 CQ와 아민만을 사용한 전통적인 복합레진(A군)이 중합개시시스템을 저농도로 함유한 복합레진(C군)에 비해 우수한 밀폐효과를 보였다. 이는 시간의 흐름에 따라 접착계면의 퇴화가 일어났거나 일부 성분이 용해가 되어 나온 것으로 보이며 앞으로 이에 대한 더 많은 연구가 필요할 것으로 사료된다.

• 대한소아치과학회지
• /
• 제31권3호
• /
• pp.516-526
• /
• 2004

심미적인 재료로 널리 사용되고 있는 복합레진은 중합과정에서 발생하는 수축으로 인해 여러 임상적 문제를 유발할 수 있다. 중합수축을 최소화하기 위한 방법의 하나로 복합레진의 성분을 변화시키는 방법이 연구되어 왔다. 본 연구의 목적은 기질조성의 변화를 통한 중합수축의 감소를 위해 최근 개발된 복합레진과 나노필러를 이용한 복합레진을 대상으로 중합과정에서 발생하는 수축량 및 수축응력을 측정하고 각 재료의 압축강도와 미세경도를 측정한 다음 그 결과들을 기존의 복합레진과 종합적으로 비교하여 평가해 보고자 하는 것이었다. 시편은 각 군당 20개씩 준비하였으며 실험에 사용된 복합레진으로는 Bis-GMA 기질에 TEGDMA와 UDMA를 혼합한 $Denfil^{TM}$(Vericom, 한국) $0.4-0.7{\mu}m$의 필러를 기준으로 나노필러를 첨가한 $Charmfil^{(R)}$(Dentkist, 한국), 기질의 TEGDMA의 상당부분을 UDMA와 Bis-EMA(6)로 대체한 $Filtek^{TM}$ Z250(3M-ESPE, USA), 그리고 나노필러만을 이용한 $Filtek^{TM}$ Supreme(3M-ESPE, USA)를 선정하였으며, 광중합기인 Curing Light 2500(3M, USA)를 이용하여 각각 40초간 광조사하였다. 광조사 후 1초 간격으로 10분간 수축응력과 선 수축률을 스트레인 게이지를 이용하여 측정한 다음 그래프로 분석하였고, 중합 1분 후와 10분 후의 수축응력과 선 수축률을 통계분석하였다. 또한 만능시험기와 미세경도기를 이용하여 중합 24시간 후 각 군의 압축강도와 미세경도를 측정하여 통계분석하였다. 수축응력 양상을 관찰해 본 결과 각 군에서 모두 중합 초기에 일시적인 재료의 팽창을 나타내었고, 그 후 수축응력이 약 1분간 급격히 증가한 다음 서서히 증가속도가 감소하는 양상을 보였다. 1분 후에서는 각 군간에 통계학적 유의성은 없었다. 10분 후에서는 IV군과 II군간에 유의한 차이가 존재하였다(p<.05). 1분간 측정한 회귀분석에서는 III군의 기울기가 가장 적었고, II군 I군, IV군의 순이었다. 중합수축률 측정 실험에서는 중합 초기의 일시적 인 팽창과 약 1분간의 급격한 수축 증가를 나타내었고 그 후 서서히 증가속도가 감소하는 양상을 보였다. 1분 후에서는 IV군과 III군간에 유의한 차이가 있었다(p<.05). 10분후에서는 IV군이 I군과 III군에서 유의 한 차이가 있었으며 II군과 III군간에도 유의한 차이가 있었다(p<.05). 1분간 측정한 회귀분석에서는 II군의 기울기가 가장 적었으며, IV군, III군, I군의 순이었다. 압축강도 실험에서는 III군, II군, IV군, I군의 순으로 높게 나타났으며, III군이 IV군과 I군에 유의한 차이가 있었다(p<.05). 미세경도 실험에서는 모든 군에서 상면에 비해 하면의 미세경도가 통계학적으로 유의차 있게 낮은 것으로 나타났다(p<.05). 이상의 결과를 종합하여 볼 때, hybrid 필러를 이용한 레진에서 상대적으로 낮은 수축률과 우수한 물성을 보였으며, 나노필러를 사용한 복합레진의 경우, 기존의 hybrid 필러를 이용한 레진에 비하여 수축응력을 감소시키지는 못하였다. 나노필러를 이용한 복합레진은 개발의 초기단계이며, 물성의 증가를 위한 연구가 필요할 것으로 사료된다.