• Journal of electromagnetic engineering and science
• /
• 제6권2호
• /
• pp.92-97
• /
• 2006

In this paper, a fully integrated Ku-band tripler differential MMIC voltage controlled oscillator(VCO), which consists of a differential VCO core and two triplers, is developed using high linearity InGaP/GaAs HBT technology. The VCO core generates an oscillation frequency of 3.583 GHz, an output power of 3.65 dBm, and a phase noise of -96.7 dBc/Hz at 100 kHz offset with a current consumption of 30 mA at a supply voltage of 2.9 V. The tripler shows excellent side band rejection of 23 dBc at 3 V and 12 mA. The tripler differential MMIC VCO produces an oscillation frequency of 10.75 GHz, an output power of -13 dBm and a phase noise of -89.35 dBc/Hz at 100 kHz offset.

• ETRI Journal
• /
• 제27권5호
• /
• pp.569-578
• /
• 2005

The purpose of this paper is to describe the implementation of monolithically matching circuits, interface circuits, and RF core circuits to the same substrate. We designed and fabricated on-chip 1 to 6 GHz up-conversion and 1 to 8 GHz down-conversion mixers using a 0.8 mm SiGe hetero-junction bipolar transistor (HBT) process technology. To fabricate a SiGe HBT, we used a reduced pressure chemical vapor deposition (RPCVD) system to grow a base epitaxial layer, and we adopted local oxidation of silicon (LOCOS) isolation to separate the device terminals. An up-conversion mixer was implemented on-chip using an intermediate frequency (IF) matching circuit, local oscillator (LO)/radio frequency (RF) wideband matching circuits, LO/IF input balun circuits, and an RF output balun circuit. The measured results of the fabricated up-conversion mixer show a positive power conversion gain from 1 to 6 GHz and a bandwidth of about 4.5 GHz. Also, the down-conversion mixer was implemented on-chip using LO/RF wideband matching circuits, LO/RF input balun circuits, and an IF output balun circuit. The measured results of the fabricated down-conversion mixer show a positive power conversion gain from 1 to 8 GHz and a bandwidth of about 4.5 GHz.

• Journal of Power Electronics
• /
• 제5권2호
• /
• pp.109-119
• /
• 2005

This paper deals with the performance analysis of static compensator (STATCOM) based voltage regulator for self­excited induction generators (SEIGs) supplying balanced/unbalanced and linear/ non-linear loads. In practice, most of the loads are linear. But the presence of non-linear loads in some applications injects harmonics into the generating system. Because an SEIG is a weak isolated system, these harmonics have a great effect on its performance. Additionally, SEIG's offer poor voltage regulation and require an adjustable reactive power source to maintain a constant terminal voltage under a varying load. A three-phase insulated gate bipolar transistor (IGBT) based current controlled voltage source inverter (CC- VSI) known as STATCOM is used for harmonic elimination. It also provides the required reactive power an SEIG needs to maintain a constant terminal voltage under varying loads. A dynamic model of an SEIG-STATCOM system with the ability to simulate varying loads has been developed using a stationary d-q axes reference frame. This enables us to predict the behavior of the system under transient conditions. The simulated results show that by using a STATCOM based voltage regulator the SEIG terminal voltage can be maintained constant and free from harmonics under linear/non linear and balanced/unbalanced loads.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 B
• /
• pp.1126-1128
• /
• 2002

In proportion to the development of various cultural contents industry, although the lighting tools with advanced control system are needed, the fields of the lighting tools are not competitive in techniques because they are limited in small businesses and have been lost their markets to foreign companies in the high value added industry. Accordingly, the technique that is better than current lighting tools is needed urgently. So, for the new lighting tools, this paper presents a new dimming method using IGBT(Insulated Gate Bipolar Transistor) devices. There are three procedures in this study. For the first, the authors verify superiority of IGBT Dimmer with simulation using EMTDC in former step for development of IGBT dimmer. Secondly, the authors made IGBT dimmer directly with the basis of simulation results. For the last, the efficiency, the Total Harmonic Distortion(THD) current, temperature characteristic, noise characteristic, voltage drop, heat losses between the IGBT dimmer and the Thyristor dimmer that is being used popularly in the industries the stages, and the theaters were tested and compared..

• Journal of Power Electronics
• /
• 제15권3호
• /
• pp.610-620
• /
• 2015

An inherent zero-voltage and zero-current-switching phase-shifted full-bridge converter with reverse-blocking insulated-gate bipolar transistor (IGBT) or non-punch-through IGBT is proposed in this paper. This converter not only ensures that the switches in the lagging leg works at zero-current switching, but also minimizes circulating conduction loss without any additional auxiliary circuits. A 1.2 kW hardware prototype is designed, fabricated, and tested to verify the proposed topology. The control loop design procedures with small-signal models are also presented. A simple, low-cost, and robust democratic current-sharing circuit is also introduced and verified in this study. The proposed converter is a suitable alternative for compact, cost-effective applications with high-voltage input.

• Journal of Power Electronics
• /
• 제12권1호
• /
• pp.120-127
• /
• 2012

Fault diagnosis technique of electrical drives is becoming more and more important, since voltage fed converter system has become industrial standard in many applications. Many studies have been conducted an inverter fault diagnosis for induction motors. However, there are few researches about fault diagnosis of 3-phase ac/dc PWM (Pulse Width Modulation) converter compared to the dc/ ac inverter. The ac/dc converter is the opposite of dc/ac inverter at current flow. Also, inverter and converter have different current patterns under the same condition of IGBT (Insulated gate bipolar transistor) open switch fault. Therefore, it is difficult to apply intact diagnosis methods of inverter to the converter. This paper proposes modified fault detection methods for IGBT open switch fault in 3-phase ac/dc PWM converter by modifying established fault diagnostic methods for dc/ac inverters.

• 대한전자공학회논문지SD
• /
• 제40권10호
• /
• pp.32-38
• /
• 2003

SIMOX 웨이퍼를 사용하여 제작된 GAA 구조 SOI MOSFET의 열전자에 의한 소자열화를 측정·분석하였다. nMOSFET의 열화는 스트레스 게이트 전압이 문턱전압과 같을 때 최대가 되었는데 이는 낮은 게이트 전압에서 PBT 작용의 활성화로 충격이온화가 많이 되었기 때문이다. 소자의 열화는 충격이혼화로 생성된 열전자와 홀에의한 계면상태 생성이 주된 원인임을 degradation rate와 dynamic transconductance 측정으로부터 확인하였다. 그리고 pMOSFET의 열화의 원인은 DAHC 현상에서 생성된 열전자 주입에 의한 전자 트랩핑이 주된 것임을 스트레스 게이트 전압변화에 따른 드레인 전류 변화로부터 확인 할 수 있었다.

• 디지털콘텐츠학회 논문지
• /
• 제18권6호
• /
• pp.1193-1198
• /
• 2017

본 논문에서 개발된 IGBT 구조는 DC 송배전을 위한 고전력 스위치 반도체로서 사용되며, 빠른 스위칭 속도 및 개선된 항복전압 특성을 확보하여, 향후 신재생 장거리 DC 송전을 위한 중요한 전자 소자로서 이용될 것이 기대되고 있다. 새로운 타입의 차세대 전력 반도체로서, 스위칭 속도를 향상시키면서 동시에 항복 전압의 특성을 개선시켜, 전력 손실 특성을 줄이도록 설계되었고, 높은 전류 밀도의 장점을 동시에 획득 가능하다. 이러한 개선된 특성은 Planar IGBT의 N-drift 영역에 $SiO_2$를 추가로 도입함으로서 얻어지며, Sentaurus TCAD 시뮬레이션 툴을 사용하여, 비교 분석하였다.

• 한국전기전자재료학회논문지
• /
• 제19권10호
• /
• pp.907-911
• /
• 2006

In this paper, we propose a new structure that improves the on-state voltage drop and switching speed in Insulated Gate Bipolar Transistors(IGBTs), which can be widely used in high voltage semiconductors. The proposed structure is unique in that the collector area is divided by $SiO_2$, whereas the conventional IGBT has a planar P+ collector structure. The process and device simulation results show remarkably improved on-state and switching characteristics. Also, the current and electric field distribution indicate that the segmented collector structure has increased electric field near the $SiO_2$ corner, which leads to an increase of electron current. This results in a decrease of on-state resistance and voltage drop to $30%{\sim}40%$. Also, since the area of the P+ region is decreased compared to existing structures, the hole injection decreases and leads to an increase of switching speed to 30 %. In spite of some complexity in process procedures, this structure can be manufactured with remarkably improved characteristics.

• Journal of electromagnetic engineering and science
• /
• 제5권1호
• /
• pp.8-13
• /
• 2005

The InGaP/GaAs hetero-junction bipolar transistor(HBT) monolithic voltage-controlled dielectric resonator oscillator(VCDRO) is first demonstrated for a Ku-band low noise block down-converter(LNB) system. The on-chip voltage control oscillator core employing base-collector(B-C) junction diodes is proposed for simpler frequency tuning and easy fabrication instead of the general off-chip varactor diodes. The fabricated VCDRO achieves a high output power of 6.45 to 5.31 dBm and a wide frequency tuning range of ]65 MHz( 1.53 $\%$) with a low phase noise of below -95dBc/Hz at 100 kHz offset and -115 dBc/Hz at ] MHz offset. A]so, the InGaP/GaAs HBT monolithic DRO with the same topology as the proposed VCDRO is fabricated to verify that the intrinsic low l/f noise of the HBT and the high Q of the DR contribute to the low phase noise performance. The fabricated DRO exhibits an output power of 1.33 dBm, and an extremely low phase noise of -109 dBc/Hz at 100 kHz and -131 dBc/Hz at ] MHz offset from the 10.75 GHz oscillation frequency.