• Journal of the Korean Society of Industry Convergence
• /
• v.17 no.4
• /
• pp.245-254
• /
• 2014

In this paper, stable and robust dynamic walking for a biped motion is proposed. To success this objective, the following structures are processed. In this paper, the proposed control method is one that adjusts actual zero moment position to move to the closest possible point in the stable area instead of following desired zero moment position. This minimizes energy consumption with the smallest joint movements. The proposed control method makes mechanical energy that drives lower limb of the bipedal robot efficient. In this paper, walking experiment is carried out with the three control structures mentioned above. The trajectory generated by off-line is illustrated by performing to walking on flat ground. experiment with an obstacle whose height is lower than that of trajectory is executed to validate dynamic motion.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.4
• /
• pp.417-425
• /
• 2012

This paper presents reference ZMP trajectory generation and implementation for a biped robot via linear inverted dumbbell model (LIDM), which can consider the effect of external momentum on the center of mass (COM) of robot. Based on a reference ZMP trajectory derived by using LIDM, a base trajectory is proposed not only to make the locomotion of robot similar to that of human but also to facilitate its implementation and tuning. In order to realize a dynamic walking using the proposed trajectory, compliance, impedance and ZMP tracking controllers are adopted together. Extensive experiments show that the proposed locomotion of a biped robot is stable and also, similar to that of human. Further researches on balance recovery of a biped robot will be carried out to guarantee its robust locomotion in combination with the proposed trajectory.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.4 s.181
• /
• pp.75-82
• /
• 2006

In this paper, we propose an optimal trajectory for biped robots to move up-and-down stairs using a genetic algorithm and a computed-torque control for biped robots to be dynamically stable. First, a Real-Coded Genetic Algorithm (RCGA) which of operators are composed of reproduction, crossover and mutation is used to minimize the total energy. Constraints are divided into equalities and inequalities: Equality constraints consist of a position condition at the start and end of a step period and repeatability conditions related to each joint angle and angular velocity. Inequality constraints include collision avoidance conditions of a swing leg at the face and edge of a stair, knee joint conditions with respect to the avoidance of the kinematic singularity, and the zero moment point condition with respect to the stability into the going direction. In order to approximate a gait, each joint angle trajectory is defined as a 4-th order polynomial of which coefficients are chromosomes. The effectiveness of the proposed optimal trajectory is shown in computer simulations with a 6-dof biped robot that consists of seven links in the sagittal plane. The trajectory is more efficient than that generated by the modified GCIPM. And various trajectories generated by the proposed GA method are analyzed in a viewpoint of the consumption energy: walking on even ground, ascending stairs, and descending stairs.

• Proceedings of the KIEE Conference
• /
• 1995.07b
• /
• pp.871-873
• /
• 1995

The purpose of this paper is to design and construct the compact type joint driver and controller of the biped robot. This biped robot will be designed to be suitable for the practical usages and applications in the work environment, which is not plat floor, like a stairs by taking the stand-alone style that equipped all the parts except power sources. Generally, highly nonlinear motion dynamics of the biped robot is realized to linear approximations by installing a high-ratio speed reducer at each joint and dividing motions into a several piecewise linear motions, which is realized by the digital controller design techniques. This biped robot has symmetrical structure to get the stable walking ability and also the hierachical structure to control each joint as well. That is, all of the joint controllers are connected to the main controller in the composition of overall controllers. The driver and controller of each joint uses PI controller that compensate the velocity and position errors by the data of the encoder. And the signal characteristics of each joint controller forms a trapezoid speed profile which is predefined by the values of direction, maximum velocity and position.

• Smart Structures and Systems
• /
• v.9 no.6
• /
• pp.535-547
• /
• 2012

Controlling the balance of motion in a context involving a biped robot navigating a rugged surface or a step is a difficult task. In the present study, a $3{\times}5$ flexible piezoelectric tactile sensor array is developed to provide a foot pressure map and zero moment point for a biped robot. We introduce an innovative concept involving structural electrodes on a piezoelectric film in order to improve the sensitivity. The tactile sensor consists of a polymer piezoelectric film, PVDF, between two patterned flexible print circuit substrates (FPC). Additionally, a silicon rubber bump-like structure is attached to the FPC and covered by a polydimethylsiloxane (PDMS) layer. Experimental results show that the output signal of the sensor exhibits a linear behavior within 0.2 N ~ 9 N, while its sensitivity is approximately 42 mV/N. According to the characteristic of the tactile sensor, the readout module is designed for an in-situ display of the pressure magnitudes and distribution within $3{\times}5$ taxels. Furthermore, the trajectory of the zero moment point (ZMP) can also be calculated by this program. Consequently, our tactile sensor module can provide the pressure map and ZMP information to the in-situ feedback to control the balance of moment for a biped robot.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.10
• /
• pp.1014-1021
• /
• 2008

This paper proposes an intelligent sliding mode control method for robotic systems with the unknown bound of model uncertainties. In our control structure, the unknown bound of model uncertainties is used as the gain of the sliding controller. Then, we employ the function approximation technique to estimate the unknown nonlinear function including the width of boundary layer and the uncertainty bound of robotic systems. The adaptation laws for all parameters of the self-recurrent wavelet neural network and those for the reconstruction error compensator are derived from the Lyapunov stability theorem, which are used for an on-line control of robotic systems with model uncertainties and external disturbances. Accordingly, the proposed method can not only overcome the chattering phenomenon in the control effort but also have the robustness regardless of model uncertainties and external disturbances. Finally, simulation results for the five-link biped robot are included to illustrate the effectiveness of the proposed method.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.523-525
• /
• 2004

Over the last few years, the control of bipedal robot has been considered a promising research field in the community of robotics. But the problems we encounter make the control of a bipedal robot a hard task. The complicated link connection of the bipedal robot makes it impossible to achieve its exact model. In addition, the joint velocity is needed to accomplish good control performance. In this paper a control method using ANFIS as an system approximator is purposed. First a model biped robot of a biped robot with switching leg influence is presented. Unlike classical method, ANFIS approximation error estimator is inserted in the system for tuning the ANFIS. In the entire system, only ANFIS is used to approximate the uncertain system. ANFIS tuning rule is given combining the observation error, control error and ANFIS approximation error. But this needs velocity information which is not available. So a practical method is newly presented. Finally, computer simulation results is presented to show this control method has good position tracking performance and robustness without need for leg switching acknowledgement.

• Proceedings of the KIEE Conference
• /
• 1999.07g
• /
• pp.3089-3091
• /
• 1999

To control IWR-III Biped Waking Robot, those complex modules are necessary that concurrent control multi-axes servo motors, PID & Feedforward gain tuning, initial value calibration, display current status of system, user interface for emergency safety and three-dimensional rendering graphic visualization. It is developed for various-type gait $data^{[1]}$ and for control modes (i.e open/closed loop and pulse/velocity/torque control) that Integrated Control Enviroment with GUI( Graphic User Interface) consist of time-buffered control part using MMC (Multi-Motion Controller) and 3D simulation part using DirectX graphic library.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.9
• /
• pp.825-832
• /
• 2004

A small biped robot system is designed and implemented. The robot system consists of a mechanical robot body, a control system, a sensor system, and a user interface system. The robot has 12 dofs for two legs, 6 dofs for two arms, 2 dofs for a neck, so it has total 20 dofs to have dexterous motion capability. The implemented robot has the capability of performing intelligent actions such as playing soccer, resisting external forces, and walking on a slope terrain. In this paper, we focus on the robot's capability of playing soccer. The robot uses a color CCD camera attached on its head as a sensor for playing soccer. To make the robot play soccer with only one camera, an algorithm, which consists of searching, localization, and motion planning, is proposed and experimented. The results show that the robot can play soccer successfully in the given environments.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.23 no.1
• /
• pp.51-56
• /
• 2013

In order to apply a biped robot in real world, the robot requires a robust walking and a function of localization, path planning and navigation. Recently, localization and path planning using RFID of mobile robot has been studying. However, when the biped robot walks, it has unstability and tends to leave the path. In the paper we propose a method of walking stabilization using FSR(Force Sensing Resistor), Gyro and accelerometer for the real biped robot. Also a path tracking algorithm using RFID sensor attached in robot's foot is proposed based on localization of the robot. The proposed algorithm is verified from walking experiments using real biped robot on uneven terrain and path tracking experiments on the RFID environments.