• 한국재료학회지
• /
• 제18권12호
• /
• pp.669-672
• /
• 2008

Well-aligned Zinc oxide (ZnO) nanowires were synthesized on silicon substrates by a carbothermal evaporation method using a mixture of ZnO and graphite powder with Au thin film was used as a catalyst. The XRD results showed that as-prepared product is the hexagonal wurzite ZnO nanostructure and SEM images demonstrated that ZnO nanowires had been grown along the [0001] direction with hexagonal cross section. As-grown ZnO nanowires were coated with glucose oxidase (GOx) for glucose sensing. Glucose converted into gluconic acid by reaction with GOx and two electrons are generated. They transfer into ZnO nanowires due to the electric force between electrons and the positively charged ZnO nanostructures in PBS. Photoluminescence (PL) spectroscopy was employed for investigating the movements of electrons, and the peak PL intensity increased with the glucose concentration and became saturated when the glucose concentration is above 10 mM. These results demonstrate that ZnO nanostructures have potential applications in biosensors.

• Food Science and Biotechnology
• /
• 제17권1호
• /
• pp.15-19
• /
• 2008

This research was conducted to develop a quick and sensitive method of detecting carbamate residues using the immobilization of antibody-antigen interactions with surface plasmon resonance (SPR). We have used commercialized surface plasmon resonance equipment (Biacore 3000). The antibody used for the immunoassay was specific for glutathione-s-transferase (GST) and the antigens included several carbamate pesticides (carbofuran, carbaryl, and benfuracarb). When antigens were applied to the protein GST, the detection limit was 2 ng/mL of carbamate pesticide. The fabricated protein GST maintained its activity for over 200 measurements. Thus we determined that the SPR biosensors could detect the specific reversible binding of a reactant in solution to a binding partner immobilized on the surface of the sensor and allow real-time detection and monitoring.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 C
• /
• pp.2134-2136
• /
• 2004

A microcantilever-based biosensor with piezoresistor has been fabricated using surface micromachining technique, which is cost effective and simplifies a fabrication procedure. To evaluate the characteristics of the cantilever, the cystamine terminated with thiol was covalently immobilized on the gold-coated side of the cantilever and glutaraldehyde that would be bonded with amine group in the cystamine was injected subsequently. This process was characterized by measuring the deflection of the cantilever in real time monitoring. Using a piezoresistive read-out and a well-known optical beam deflection method as well carried out the measurement of deflection.

• Food Science and Biotechnology
• /
• 제17권3호
• /
• pp.547-552
• /
• 2008

The detection of carbamate (carbofuran, carbaryl, benfracarb, thiodicarb, and methomil) and organophosphate (diazinon, cadusafos, ethoprofos, parathion-methyl, and chlorpyrifos) pesticide residues with very low detection limits was carried out using surface plasmon resonance (SPR) based equipment. The capacity to develop a portable SPR biosensor for food safety was also investigated. The applied ligand for the immunoassays was polyclonal goat anti-rabbit immunoglobulin (IgG) peroxidase conjugate. Concentration tests using direct binding assays showed the possibility of quantitative analysis. For ligand fishing to find a proper antibody to respond to each pesticide, acetylcholinesterase (AChE), and glutathione-S-transferase (GST) were tested. The reproducibility and precision of SPR measurements were evaluated. With this approach, the limit of detection for pesticide residues was 1 ng/mL and analysis took less than 11 min. Thus, it was demonstrated that detecting multi-class pesticide residues using SPR and IgG antibodies provides enough sensitivity and speed for use in portable SPR biosensors.

• 한국환경보건학회지
• /
• 제38권2호
• /
• pp.83-94
• /
• 2012

The research on microbial fuel cells (MFCs) needs various knowledge of different fields such as electrochemistry, microbiology, environmental engineering, and material engineering. Although electrochemically active bacteria are very diverse, the performance of MFCs is affected primarily by the structure of the reactor system. Thus, the development in the system architecture is critical to lower internal resistance and increase power generation for commercialization. This paper summarizes the principles of MFCs and demonstrates the infinite potential of MFCs in various applications including wastewater treatment, biosensors, biohydrogen production, remote power sources, implantable medical devices, etc.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.243.1-243.1
• /
• 2010

Devices based on nanomaterials platforms are emerging as a powerful tool for ultrasensitive sensors for the direct detection of biological and chemical species. In this talk, we will report the preparation and the full characterization of electrochemical polymerization of biopolymers platforms and nano-structure formation for electrochemical detection of enzymatic activity and toxic compound in electrolyte for biosensor applications. Formation of an electroactive polymer film of two different compounds has been quantified by observing new redox peak at higher potentials in cyclic voltammogram measurements. RCT value of at various biopolymer concentration based hybrid films has been obtained from electrochemical impedance spectroscopy analysis and possible mechanism for formation of complexes during electrochemical polymerization on conducting substrates has been investigated. Biosensors developed based on these hybrid biopolymers have very high sensitivity.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.105.2-105.2
• /
• 2016

For the rational design and facile fabrication of novel nanostructures, we present a new approach to generating arrays of three-dimensionally tunable nanostructures by exploiting light-matter interaction. To create controlled three-dimensional (3D) nanostructures, we utilize the 3D spatial distribution of light, induced by the light-matter interaction, within the matter to be patterned. As a systematic approach, we establish 3D modeling that integrates the physical and chemical effects of the photolithographic process. Based on a comprehensive analysis of structural formation process and nanoscale features through this modeling, we are able to realize three-dimensionally tunable nanostructures using facile photolithographic process. Here we first demonstrate the arrays of three-dimensionally controlled, stacked nanostructures with nanoscale, tunable layers. We expect that the promising strategy would open new opportunities to produce the arrays of tunable 3D nanostructures using more accessible and facile fabrication process for various biomedical applications ranging from biosensors to drug delivery devices.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2000년도 춘계학술발표대회
• /
• pp.546-549
• /
• 2000

Avidin-biotin의 강한 결합력을 이용하여 금속 표면 위에 리포좀과 같은 유기 분자막의 다층 형성 과정을 QCA의 공진주파수와 공진저항의 변화를 측정하므로서 실시간 모니터링의 가능성을 검토하고, 유기 분자막이 금속 표면 위에 적층 됨에 따라 형성되는 적층 막에 대한 정보를 수집함으로서 바이오센서 시스템으로 QCA를 적용 가능함의 기초 데이터를 제공하고자 한다.

• 센서학회지
• /
• 제15권3호
• /
• pp.164-167
• /
• 2006

Calorimeter is one of widely used biosensors. Conventional or existing calorimeters are realized directly on a silicon wafer which has very high thermal conductivity. It results in decreasing temperature difference between junctions and it makes a sensitivity of calorimeter to be decreased. In this study, the microcalorimeter was made by using MEMS(Micro Electro Mechanical Systems)-technology and hot junctions of the microcalorimeter are released from a silicon substrate to reduce loss of generated heat by reactions between biomolecules. Sensitivity of the released microcalorimeter was 18 mV/M which is 1.5 times higher than another calorimeters on silicon substrate by reactions between biotin and streptavidin.

• 한국정밀공학회지
• /
• 제21권8호
• /
• pp.152-156
• /
• 2004

A new tool of surface patterning technique for general purpose lithography was developed based on shadow mask method. This paper describes the fabrication of a new type of miniaturized shadow mask. The shadow mask is fabricated by photolithography and etching of 100-mm full wafer. The fabricated shadow mask has over 388 membranes with apertures of micrometer length scale ranging from 1${\mu}{\textrm}{m}$ to 100s ${\mu}{\textrm}{m}$ made on each 2mm${\times}$2mm large low stress silicon nitride membrane. It allows micro scale patterns to be directly deposited on substrate surface through apertures of the membrane. This shadow mask method has much wider choice of deposit materials, and can be applied to wider class of surfaces including chemical functional layer, MEMS/NEMS surfaces, and biosensors.