• Journal of Hydrogen and New Energy
• /
• v.20 no.6
• /
• pp.519-525
• /
• 2009

The catalytic steam reforming of woody biomass tar and soot to convert a synthetic gas containing hydrogen was investigated by using a bench-scale biomass gasification system. One commercial nickel-based catalyst, Katalco 46-6Q, and two different kinds of natural minerals, dolomite and olivine, were tested as a reforming catalyst at various reforming temperatures. The reaction characteristics of woody biomass tar were also investigated by TGA at a variety of heating rates. With all three catalysts conversion efficiency of tar and soot increased at increasing temperature. The reforming of tar and soot in the synthetic gas induce the increase of combustible gases such as $H_2$, CO and $CH_4$ in the product gas. The nickel-based catalyst showed a higher tar and soot conversion efficiency than mineral catalysts under the same temperature conditions.

• 한국연소학회:학술대회논문집
• /
• 2014.11a
• /
• pp.355-356
• /
• 2014

Catalytic steam reforming of tar produced from biomass gasification was conducted using several Ni-based catalysts. K and Mn were used as a promoter over $Ni/Ru/Al_2O_3$ catalyst. The pellet and monolith type catalysts were prepared and applied to lab and bench-scale biomass gasification system. The $Ni/Ru-K/Al_2O_3$ catalyst shown higher performance than $Ni/Ru-Mn/Al_2O_3$ catalyst at low temperature range.

• 한국생물공학회:학술대회논문집
• /
• 2000.04a
• /
• pp.113-116
• /
• 2000

Hexavalent chromium was removed by means of biosorption onto the protonated brown seaweed biomass. During the biosorption Cr(VI) was reduced to Cr(III), which resulted in accumulation of Cr(III) in the solution. The Cr(VI) reduction rate increased with increases of initial Cr(VI) and biosorbent concentrations and decrease of solution pH. Based upon the experimental results at various conditions, we suggested the mechanism for the chromium removal as following serial reactions: (1) sorption of anionic Cr(VI) onto the positively charged site of biomass, (2) reduction of Cr(VI) to Cr(III) on the positively charged site, (3) desorption of Cr(III) from the positively charged site, and (4) sorption of cationic Cr(III) onto the negatively charged site of biomass.

• Journal of Plant Biology
• /
• v.33 no.4
• /
• pp.225-236
• /
• 1990

Intertidal algal communities of Muchangpo and Maryangri in western coast of Korea were investigated qualitatively and quantitatively. Seasonal assessments of species composition, biomass, dominant species in biomass and vertical distributional pattern were conducted from July 1986 to April 1988. Ninety-nine species of marine algae (13 Cyanophyta, 12 Chlorophyta, 24 Phaeophyta and 50 Rhodophyta) were observed, of which 90 (13 Cyanophyta, 11 Chlorophyta, 23 Phaeophyta and 43 Rhodophyta) were from Muchangpo and 83 (10 Cyanophyta, 11 Chlorophyta, 21 Phaeophyta and 41 Rhodophyta) were from Maryangri, respectively. Ordination by detrended correspondence analysis based on the floristic data from nine localities indicated that, on the whole, marine algal distribution in western coast of Korea might be divided into two regions, i.e. the north and the south, being separated at the Taean Peninsula, the mid-western coast. Seasonal fluctuations of mean biomass were 44.55-201.19g-dry wt/$m^2$ at Muchangpo and 19.59-134.76g-dry wt/$m^2$ at Maryangri. Important species determined by the specific proportion of biomass were Sargassum thunbergii, Pelvetia siliquosa and Corallina pilulifera at Muchangpo, and Sargassum thunbergii and Corallina pilulifera at Maryangri.

• Environmental Engineering Research
• /
• v.23 no.3
• /
• pp.229-241
• /
• 2018

Microalgae are likely to become a part of our everyday diet in the near future as they are considered to be rich in proteins, carbohydrates, and high density lipoproteins. They will play a pivotal role in the food cycle of many people around the globe. Use of microalgae in treating wastewater is also one of the disciplines which are luring researchers as this contributes to a sustainable way of exploiting resources while keeping the environment safe. In addition, microalgal biomass also has the potential to be used as a feedstock for producing biofuel, bio fertilizers, pharmaceuticals, nutraceuticals and other bio-based products. This review presents the different value-added products obtained from microalgal biomass and the applicability of these products commercially.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.42 no.5
• /
• pp.1-14
• /
• 2010

Bio-ethanol is a promising alternative energy source for reducing both consumption of crude oil and environmental pollution from renewable resources like lignocellulosic biomass such as wood, forest residuals, agricultural leftovers and urban wastes. Based on current technologies, the cost of ethanol production from lignocellulosic materials is relatively high, and the main challenges are the low yield and high cost of the hydrolysis process. Development of more efficient pretreatment technology (physical, chemical, physico-chemical, and biological pretreatment), integration of several microbiological conversions into fewer reactors, and increasing ethanol production capacity may decrease specific investment for ethanol producing plants. The purpose of pretreatment of lignocellulosic material is to improve the accessible surface area of cellulose for hydrolytic enzymes and enhance the conversion of cellulose to glucose and finally high yield ethanol production which is economic and environmental friendly.

• Journal of Environmental Science International
• /
• v.30 no.6
• /
• pp.455-463
• /
• 2021

This study investigated the biomass content of fluff type SRF(Solid refuse fuel) operated in B city according to the physical composition. As a result of analyzing the physical composition of SRF, it was investigated that papers 25.2%, fiber 15.1%, vinyl·plastics 42.6%, woods 9.4%, rubbers 1.5%, diapers 3.2% and incombustibles 3.0%. The average of ash and combustible content of SRF was 10.5% and 89.5%, and the higher the proportion of paper and wood, the lower proportion of ash. In addition, the biomass of SRF is 24.9%~58.0%, with an average of 42.6%.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.447-449
• /
• 2003

Remotely sensed data can be used to estimate biomass production using methodologies relating vegetation indices to light absorption or to leaf photosynthetic capacity. The considerations of both light absorption and photosynthetic capacity in remote sensing-based modeling to estimate biomass production or NPP was introduced based upon Monteith model NPP is one of a evaluation of land degradation. NPP was estimated from annual maximum NDVI by MODIS data. It was known that NPP of the grassland that except the forest and the farming ground was distributed between 50-200g /m2.

• Elastomers and Composites
• /
• v.55 no.4
• /
• pp.249-256
• /
• 2020

Superabsorbent polymers (SAPs) can absorb and retain ten to thousand times their dry mass of water because of their three-dimensional hydrophilic structures. Conventional SAPs are mainly composed of poly(acrylic acid sodium salt) derived from petrochemicals. The present work is aimed at limiting the use of the petrochemical component by replacing it with a biomass-based material. First, the core-SAP was prepared via the terpolymerization of itaconic acid, vinylsulfonic acid, and cellulose, and the optimum conditions in terms of material input ratio were determined. Following this, the core-SAP was surface-crosslinked by esterification with butane diol to improve its liquid permeability and absorbency under load (AUL). The liquid permeability was measured according to the amount of 0.9 wt.% NaCl solution passing between the swollen SAP particles under a given pressure, and the AUL was estimated from the weight of this solution absorbed under 0.3 psi pressure.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.31 no.3
• /
• pp.27-34
• /
• 2023

In this study, various plant-based biomass are recycled into carbon materials to employ as anode materials for lithium-ion batteries. Firstly, various biomass of rice husk, chestnut, tea bag, and coffee ground are collected, washed, and ground. The carbonization process is followed under a nitrogen atmosphere at 850℃. The morphological and chemical properties of materials are investigated using FE-SEM, EDS, and FT-IR to compare the characteristic differences between various biomass. It is noticeable that biomass-derived carbon materials vary in shape and degree of carbonization depending on their precursor materials. These materials are applied as anode materials to measure the electrochemical performance. The specific capacities of rice husk-, chetnut-, tea bag-, and coffee ground-derived carbon materials are evaluated as 65.8, 80.2, 90.6, and 104.7 mAh g^-1 at 0.2C. Notably, coffee ground-based carbon exhibited the highest specific capacity owing to the difference in elemental composition and the degree of carbonization. Conclusively, this study suggests the possibility of utilizing as energy storage devices by employing various plant-based biomass into active materials for anodes.