• Food Science and Preservation
• /
• v.24 no.3
• /
• pp.374-380
• /
• 2017

The quality characteristics of 'Xiangshui' pears (Pyrus ussuriensis) treated with different concentrations of biomass pyrolysis liquid (BPL) during storage at $25^{\circ}C$ were investigated. The weight of 'Xiangshui' pears treated with BPL declined at a slower rate than that of the control. The rot index of BPL-treated 'Xiangshui' pears decreased with increasing storage times, and treatment with 20-fold-diluted BPL resulted in the lowest rot index after storage for 12 days. The total acid content of 'Xiangshui' pears treated with 20-fold-diluted BPL was 0.19%, and was the highest after storage for 12 days. After storage for 12 days, the total sugar content of 'Xiangshui' pears treated with 20-fold-diluted BPL was 7.19%; this was significantly higher than that of the control, but not significantly different from that of pears treated with other BPL dilutions. The vitamin C content of 'Xiangshui' pears showed a decreased trend, and pears treated with 20-fold-diluted BPL had a vitamin C content of 2.21 mg/100 g after storage for 12 days and showed the least decline compared to other treatments. In addition, respiration in 'Xiangshui' pears was effectively inhibited by treatment with BPL. In conclusion, BPL treatment exerts a protective effect on the quality of 'Xiangshui' pears during storage, with 20-fold-diluted BPL being the most effective.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.27 no.4
• /
• pp.61-70
• /
• 2019

This study aimed to investigate the physicochemical characteristics of fish meal, bone meal, and sesame oil cake, which are readily available by-products from agriculture and fisheries, during the process of liquid fertilizer fermentation, and to examine the effects of liquid fertilizer application on seed germination and growth of tomatoes. During processing the fermentation for liquid fertilizers by using fish meal, bone meal, and sesame oil cake liquid fertilizers, the pH of the fertilizer increased in the order of bone meal > fish meal > sesame oil cake, and the concentration increased rapidly up to 30 days in all types of liquid fertilizer. The nitrogen content of the liquid fertilizers increased as fermentation progressed in the order of fish meal > bone meal > sesame oil cake. The phosphorus content increased as fermentation progressed and the highest was 1.0 % in the liquid fertilizer of sesame oil cake. The germination rate and its index of radish seeds were compared for different dilutions of each of the liquid fertilizers. Excluding the 10-fold dilution of the fish meal and oil cake liquid fertilizer, all the treatment groups showed a germination rate ≥ 95 % and the germination index tended to increase with dilution rate of liquid fertilizers. For responses of tomato growth, there were no significant differences among the liquid fertilizer treatment groups; however, the organic content, microbial density, and microbial biomass C in the soil were higher than chemical fertilizer treatment. These results demonstrated that there were differences in the characteristics of liquid fertilizers depending on the materials used, and that liquid fertilizer can be used for nutrition management for the organic crop cultivation.

• Korean Journal of Microbiology
• /
• v.50 no.4
• /
• pp.313-318
• /
• 2014

The world is in need of sustainable and eco-friendly energy sources such as microalgal biodiesel due to global warming and fossil fuel shortages. In this study, we compared the effectiveness of liquid fertilizer produced from swine manure and agriculture grade solid fertilizers as nutrient sources for microalgal biomass production. Mixed culture (Chlorella spp., Scenedesmus spp., Stigeoclonium spp.; CSS) was cultivated for 28 days in Small Scale Raceway Pond (SSRP) using various nutrient sources (swine manure liquid fertilizer, agricultural solid fertilizer, and mixture of these two fertilizers). Biomass and lipid productivity of fertilizer mixture were the highest at 0.8 g/L and 5.8 mg/L/day, respectively. These results indicate that the fertilizer mixture can provide microalgae necessary nutrient sources for stable biodiesel production and biomass growth. In addition, overall cost of microalgal cultivation and subsequently biodiesel production would be significantly reduced.

• Korean Journal of Microbiology
• /
• v.42 no.2
• /
• pp.83-88
• /
• 2006

This research was performed to determine the production of lovastatin and its HMG-CoA reductase activity produced by fruit bodies and mycelial liquid cultures of domestic edible mushrooms (8 fungal strains). By deter-mining TLC analysis for the confirmation of the presence of lovastatin, all the extracts from fruit bodies and mycelial liquid culture showed same Rf value (0.46), whick was identical to that of the standard lovastatin. In order to extract lovastatin from fruit body, the mixture of water/acetonitrile/methanol was chosen as the most effective solvent. Extracts from fruit body and mycelial liquid culture of pleurotus ostreatus produced the high-est lovastatin 0.98 mg/g based on dry biomass, and 21.90 mg/L, respectively. In the inhibition rate of 3-hydroxy-3-methylglutaryl-CoA (HMG-CoA) reductase, the highest was obtained in P. ostreatus as 67.8% among fruit bodies, and the rates of mycelial liquid culture extracts from P. ostreatus and Laetiporus sulphureus were 37.2% and 29.1%, respectively. Unusually L. sulphureus showed high inhibition rate with low content of lovastatin due to the contribution of campesterol and gamma-sitosterol with hypocholesterolemic activity as metabolites.

• Mass Spectrometry Letters
• /
• v.4 no.1
• /
• pp.1-9
• /
• 2013

Fungal biotechnology has been well established in food and healthcare sector, and now being explored for lignocellulosic biorefinery due to their great potential to produce a wide array of extracellular enzymes for nutrient recycling. Due to global warming, environmental pollution, green house gases emission and depleting fossil fuel, fungal enzymes for lignocellulosic biomass refinery become a major focus for utilizing renewal bioresources. Proteomic technologies tender better biological understanding and exposition of cellular mechanism of cell or microbes under particular physiological condition and are very useful in characterizing fungal secretome. Hence, in addition to traditional colorimetric enzyme assay, mass-spectrometry-based quantification methods for profiling lignocellulolytic enzymes have gained increasing popularity over the past five years. Majority of these methods include two dimensional gel electrophoresis coupled to mass spectrometry, differential stable isotope labeling and label free quantitation. Therefore, in this review, we reviewed more commonly used different proteomic techniques for profiling fungal secretome with a major focus on two dimensional gel electrophoresis, liquid chromatography-based quantitative mass spectrometry for global protein identification and quantification. We also discussed weaknesses and strengths of these methodologies for comprehensive identification and quantification of extracellular proteome.

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.5
• /
• pp.285-292
• /
• 2015

In this study, we were clearly identify the behaviour characteristics on particle size distribution of a condensing species by injection condition of HMDS (Hexa Methyl Di-Silazane, silica precursor that is one of liquid adsorbents) to remove condensing gaseous species as using pyroligneous liquor generated during carbonization process of biomass as precursor of condensing gaseous species. When using HMDS to remove the condensing gaseous species by growth machanism of particles, we could be controlled properly particles size such as amount of adsorbent injection, residence time, heating temperature and MFC flux. Especially, in case of using the silica precursor, in consideration of the physical and chemical properties of the boiling point, the specific gravity and the molecular weight, we found that the condensing species could be effectively controlled by particles granulation.

• Journal of the Korean Society of Combustion
• /
• v.16 no.1
• /
• pp.8-14
• /
• 2011

Biomass gasification is a promising technology in terms of clean energy and flexible options for end use such as heat, steam, electricity, gaseous or liquid fuels. In a gasification process, reduction of tar is very important because it can cause any mechanical problems and small tar implies high energy efficiency. However, generation and conversion mechanisms of tar have not been fully understood due to its complex nature. In this study, characteristics of tar generated from different gasification stages were investigated. Korean pine woodchip was used as feedstock and tar was sampled in a separate way during devolatilization and char gasification stage, investigated. As a result. more various kinds of hydro carbon compounds were identified in the devolatilization stage than char gasification stage because primary tar compounds are released mostly from pyrolysis of cellulose and hemicellulose. When the reaction temperature increased up to $900^{\circ}C$, tar composition becomes simplified into about 10 aromatic compounds mostly with 1-4 rings without substitution up to phenanthrene. The sampled tar in the char gasification stage mostly contains 5-7 simple aromatic compounds.

• Environmental Engineering Research
• /
• v.20 no.4
• /
• pp.377-382
• /
• 2015

The high concentration of nitrogen and phosphorus in wastewater incorporated with the ability to use carbon dioxide as the carbon source make the microalgae become more attractive in wastewater treatment process. This study evaluates the optimal conditions for the digestion of settelable solids from the recirculating aquaculture system to produce the biomass of the green microalga Scenedesmus sp. After solids separation, aerobic digestion of settleable solids under disperse condition produced nitrate as the final product of consequently ammonification and nitrification processes. With the optimal digestion procedure, nitrate concentration during aerobic digestion in 2000 mL vessel increased from $9.63{\pm}0.65mg\;N/L$ to $58.66{\pm}0.06mg\;N/L$ in 10 days. Thereafter, cultivation of Scenedesmus sp. was performed in 1000 mL Duran bottle with air bubbling. The highest Scenedesmus sp. specific growth rate of $0.321{\pm}0.01/d$ was obtained in treatment using liquid fraction after aerobic digestion as the whole culture medium for Scenedesmus sp. cultivation. With this study, digestion of $8,800{\pm}128.12mg\;dry\;weight/L$ of settleable solids from fish pond finally produced $1,235{\pm}21mg\;dry\;weight/L$ of Scenedesmus sp. biomass.

• Journal of Korean Society of Water and Wastewater
• /
• v.14 no.1
• /
• pp.37-44
• /
• 2000

Laboratory experiments were conducted to investigate the performances of anaerobic filters packed with ceramic tube and pall-ring media treating a dairy waste. The media packing volume was 65% of effective volume of anaerobic filter. Organics removals of anaerobic filters were maintained above 80% even at an organics loading rate of $10kgCOD/m^3/d$, and this was comparable to aerobic treatment of organic wastes. Organics removals of the ceramic tube anaerobic filters were always lower than those of the pall-ring anaerobic filters due to intrinsic physical property of ceramic tube, especially lower void space which caused to clogging and entrapment of biogas, substrate transfer limitation, and irregular evolution of biogas leading to loss of solids and biomass. This was clearly observed in higher concentration of TSS in the effluent from the ceramic tube anaerobic filter despite of higher retention capacity of TSS compared with pall-ring media. Vertical distribution of organics and solids in the filters showed above 90% of organics and solids in influent were removed below 20% of reactor height, and 50% of remaining organics and solids were removed though media packing zone. Effluent quality from the anaerobic filter was heavily depended on media itself as well as suspended biomass formed below media. It is therefore concluded that the type of media played an important role in biomass accumulation arid gas-liquid-solid separation efficiency. Type of media did not affect the start-up behaviors of the anaerobic filter, and supernatant from anaerobic digested sludge showed a good performance as a seeding materials.

• Journal of Microbiology and Biotechnology
• /
• v.14 no.6
• /
• pp.1114-1119
• /
• 2004

The biofilms on pipe walls in water distribution systems are of interest since they can lead to chlorine demand, coliform growth, pipe corrosion, and water taste and odor problems. As such, the study described in this paper is part of an AWWARF and Tampa Bay Water tailored collaboration project to determine the effect of blending different source waters on the water quality in various distribution systems. The project was based on 18 independent pilot distribution systems (PDS), each being fed by a different water blend (7 finished waters blended in different proportions). The source waters compared were groundwater, surface water, and brackish water, which were treated in a variety of pilot distribution systems, including reverse osmosis (RO) (desalination), both membrane and chemical softening, and ozonation-biological activated carbon (BAC), resulting in a total of 7 different finished waters. The observations from this study consistently demonstrated that unlined ductile iron was more heavily colonized by a biomass than galvanized steel, lined ductile iron, and PVC (in that order) and that the fixed biomass accumulation was more influenced by the nature of the supporting material than by the water quality (including the secondary residual levels). However, although the bulk liquid water cultivable bacterial counts (i.e. heterotrophic plate counts or HPCs) did not increase with a greater biofilm accumulation, the results also suggested that high HPCs corresponded to a low disinfectant residual more than a high biofilm inventory. Furthermore, temperature was found to affect the biofilms, plus the AOC was important when the residual was between 0.6 and 2.0 mg $Cl_2/l$. An additional aspect of the current study was that the potential of the exoproteolytic activity (PEPA) technique was used along with a traditional so-called destructive technique in which the biofilm was scrapped off the coupon surface, resuspended, and cultivated on an R2A agar. Both techniques indicated similar trends and relative comparisons among the PDSs, yet the culturable biofilm values for the traditional method were several orders of magnitude lower than the PEPA values.